A mode-locked dye laser pumped by a xenon ion laser

Passive mode-locking of a rhodamine 6G dye laser has been achieved, using a pulsed xenon ion laser as a pumping source. A pulse width of 5 ps and a peak power of 4 kW have been obtained. Thermal problems were encountered, which adversely affected the operation of the dye laser. Work is in progress to improve these results.     

Experimental studies of self-starting passive mode locking Er3+ -doped fiber ring soliton laser

The mechanism of femtosecond optical pulse generation in a self-starting Er³⁺-doped fiber ring soliton laser and experimental research results are discussed. Using the nonlinear polarization rotation effect of the fiber for sat-urable absorbers (and then self-amplitude modulation) which acts as the mode locking mechanism in an Er³⁺-doped fiber ring cavity laser, stable self-starting mode locking pulses have been generated. The shortest output pulse is 269 fs, with the central wavelength of 1,531 pm at the repetition rate of 21.37 MHz. The average output powen of the two terminators of the laser are 0.25 mW and 0.08 mW respectively. The threshold pump power which sustains the mode locking is 15 mW. Under high pump power, the laser works in a high order harmonic mode locking state. The mode locking pulse durations vs different cavity lengths are also studied. Project supported by Major Project of Chines: Academy of Sciences (No. KJ952-J1-705).     

The Application of Mode-Locked Laser Technologies to Long Distance Transmission and Control of Soliton

The control scheme of long distance optical transmission is treated based on conception of mode-locked Laser cavity in this paper. The general mode-locking equation of fiber ring soliton Laser is first constructed, then we give the general perturbed nonlinear schrödinger equation, and finally the transmission and control equations of optical soliton communication systems with various different configurations, respectively, are obtained.     

准连续主动锁模调QNd:YLF振荡器

顺利建成了用于磷酸盐钕玻璃激光核聚变系统的准连续主动锁模调Q Nd:YLF振荡器。报道了其稳定性、可靠性和高信噪比的特性。     

半导体可饱和吸收镜实现固体激光器皮秒锁模的机理研究

对半导体可饱和吸收镜(SESAM)实现固体激光器皮秒锁模的机理进行了研究。通过对染料锁模介质和SESAM的结构对比,对SESAM皮秒锁模机理提出了一个新的解释。其在锁模激光器中充当锁模器件时,不仅仅是一个吸收体,同时也是一个增益介质。当腔内增益和损耗保持平衡时实现稳定的连续锁模。     

Routes to chaos and mode-locking in interferometers with nematic film inserts

The influence of time-dependent periodic optical drive in the Fabry-Perot interferometer system has been investigated using a theoretical model equation. A variety of features such as different routes to chaos, multiperiodic oscillations, coexistence of multiple attractors and mode-locking with devil’s staircase are found to occur for a certain range of parametric values.     

LD泵浦Nd:YVO_4/Cr:YAG激光器的被动调Q锁模

报道了实验中发现的可饱和吸收被动调Q晶体Cr:YAG的调Q锁模现象,在插入不同透过率的Cr:YAG片以及注入不同的泵浦电流时,得到了不同的调Q锁模输出波形,并对这一现象作了初步的讨论,总结出一些规律。     

Mode-locked performance of hybrid soliton pulse source utilizing fiber grating external cavity lasers

Mode-locking characteristic of hybrid soliton pulse source (HSPS) utilizing linearly chirped raised-cosine flat top apodized fiber Bragg grating (FBG) is investigated by using coupled-mode equations. It is found that the fundamental repetition frequency range of HSPS is significantly extended by using linearly chirped raised-cosine flat top apodized FBG instead of linearly chirped Gaussian apodized FBG. The range of repetition frequencies over which proper mode-locking is obtained is 2-3.3 GHz with linearly chirped raised-cosine flat top apodized grating whereas this range is 2.1-2.95 GHz with linearly chirped Gaussian apodized grating.     

Nd:YVO4自受激拉曼激光器调Q锁模特性

利用Nd:YVO4激光晶体的自受激拉曼效应,结合Cr:YAG被动锁模技术和倍频技术,实现了结构紧凑的1176 nm和588 nm黄光锁模激光输出。激光器为LD端面泵浦,三镜折叠腔结构,并且采用了透过率为10%的输出镜。Nd:YVO4晶体长度为10 mm,Nd3+离子掺杂质量分数为0.2%,Cr:YAG晶体的初始透过率为67%。10 W激光泵浦时,1176 nm激光平均输出功率为123 mW,调Q包络宽度为6 ns,调Q包络内的锁模脉冲重复频率高达1 GHz。588.2 nm 黄光的平均输出功率为8 mW。     

超低频率全正色散半导体可饱和吸收镜被动锁模光纤激光器

通过延长激光器环形腔腔长,利用高浓度掺杂的单模掺镱光纤,搭建了超低重复频率、全正色散结构的半导体可饱和吸收镜被动锁模光纤激光器。激光器的中心波长、重复频率、平均功率及单脉冲能量分别为1 064 nm,281.5 kHz,11 mW和39 nJ。为了稳定中心波长,实现自启动,激光器腔体内接入了一个带通滤波器。该激光器运行稳定,无调Q不稳定现象,极大减小了半导体可饱和吸收镜被损坏的机会。