用于大功率半导体激光器的新型焊料

在大功率半导体激光器列阵及叠阵的组装中,焊料的选择是极其关键的,因为焊料直接参与对激光器的导电、导热激光器所需的电流全部从焊料通过,而半导体激光器列阵或叠阵工作时电流是很大的,可达50A～100A。同时半导体激光器工作时产生的热量非常大,如焊料的导热性不好,由于电流的热效应,就会在焊料上产生巨大的热量,使焊料熔化。文中研制了一种新型的焊料,这种焊料在两层铟之间蒸镀几层金,焊料由钨/镍/金/铟/铜等多层金属构成。利用这种焊料研制出脉冲功率达100W的半导体激光器列阵。     

MCT列阵光电性能参数自动测试系统

本文介绍了霍尼威尔公司电光分部研制的MCT光电导列阵自动测试系统和洛克希德公司Palo Alto研究实验室研制的焦平面列阵光电参数的自动测试站。检测的光电性能参数包括光电响应率,响应光谱,噪声,探测器的RA乘积,响应频谱,光学串音和电学串音,响应率的空间频谱,调制传递函数等。     

红外焦平面用面阵微透镜的氩离子束刻蚀制作

讨论了制作大面阵矩底拱面状微透镜阵列的工艺条件，给出了氩离子束刻蚀制作红外焦平面用面阵微透镜的离子束刻蚀速率的经验关系式，通过实验获得了光电材料几种常用的氩离子束刻蚀速率与氩离子束能量之间的关系曲线，用扫描电子显微镜测量了所制微透镜阵列的微结构形貌特征。     

一种结构新型的双频双极化共口径微带天线

介绍了一种结构新型的双频双极化共口径缝隙耦合微带天线,天线工作的中心频率分别为2.1GHz(L波段)和8.6GHz(X波段),在两个工作频率采用了底馈的馈电方式.用时域有限差分法分别对L波段和X波段双极化的微带辐射单元进行了模拟分析,制作了L波段的2×2元即X波段的8×8元阵天线,同时给出了测量结果.     

碲镉汞深微台面列阵干法隔离的轮廓研究

文章报道了碲镉汞（HgCdTe）深微台面列阵干法隔离的轮廓研究的初步结果。采用诱导耦合等离子体（ICP）增强反应离子刻蚀（RIE）技术获得的HgCdTe深微台面列阵,在金刚刀解理后,通过扫描电子显微镜（SEM）观察了其干法刻蚀图形的剖面轮廓。进一步研究了刻蚀时间和刻蚀槽开口宽度对刻蚀图形轮廓的影响,获得了一些有助干深微台面芯片工艺设计的实验结果。     

微带双分支定向耦合器的小型化设计与实现

提出了小型化微带双分支定向耦合器的设计方案,通过对双分支微带线进行结构等效,解决了传统微带双分支定向耦合器尺寸较大的问题。应用HFSS软件对结构进行了优化仿真设计,并制作和测量了一款工作在L波段用于海事卫星通信的微带耦合器样件。该耦合器样件比传统双分支定向耦合器面积缩小了51%,实测结果与仿真结果吻合较好,验证了方案的可行性。     

Nanoneedle Platforms: The Many Ways to Pierce the Cell Membrane

Establishing techniques to efficiently and nondestructively access the intracellular milieu is essential for many biomedical and scientific applications, ranging from drug delivery, to electrical recording, to biochemical detection. Cell penetration using nanoneedle arrays is currently a research focus area because it not only meets the increasing therapeutic demands of cell modifications and genome editing, but also provides an ideal platform for tracking long‐term intracellular information. Although the precise mechanism driving membrane penetration by nanoneedle arrays is still unclear, the low cytotoxicity, wide range of delivered materials, diverse cell type targets, and simple material structures of nanoneedle arrays make these splendid platforms for cell access. Here, the recent progress in this field is reviewed by examining device architectures and discussing mechanisms for nanoneedle penetration, and the major studies demonstrating the most general applicability of nanoneedle arrays, typical methodologies to access the intracellular environment using nanoneedles with spontaneous or assisted penetration modes, as well as biosafety aspects are presented. This review should be valuable for deeply understanding the materials fabrication principles, device designs, cell penetration methodologies, biosafety aspects, and application strategies of nanoneedle array‐based systems that are of crucial importance for the development of future practical biomedical platforms.     

Joint beam selection and user association strategy for beam space millimetre wave downlink systems

Beam space multiple‐input multiple‐output (B‐MIMO) systems operating at mmWave frequency in downlink uses different beam selection techniques for reducing the required number of radio frequency chains without apparent performance loss. In this paper, a joint beam selection and user association scheme with the objective of sum rate maximization is proposed. The proposed work on beam selection is based on a norm and uncorrrelation based approach, which considers channel correlation among the users so as to avoid inter‐user interference. Two different methods for beam user association with one modelled as a balanced assignment problem based on average sum assignment method and the other method that associates an optimal beam to every user by considering their channel gain values are also proposed along with beam selection. The proposed beam assignment methods are less complex and efficient in finding a suitable beam to every user within the cell. Simulation results show that the proposed method accomplish comparable performance in terms of sum rate and energy efficiency with appreciably low computational complexity relative to the existing methods in a correlated environment.     

12 GHz枝节匹配宽带微带均衡器

给出了一种匹配良好的宽带微带均衡器的设计。它由在枝节上加载了薄膜电阻的微带枝节谐振器构造而成。通过大量的试验和仿真研究了电阻值对谐振器的影响。当加载薄膜电阻在枝节谐振器上时，可以得到可调的品质因数。利用HFSS分析可以看到电阻加载的枝节谐振器不仅频率可调，而且衰减可调、品质因数可调。文中利用四个加载了不同阻值的枝节谐振器得到了一个12GHz带宽的微带均衡器，给出了结构图和特性曲线。结果表明这种加载电阻的谐振器结构很适合宽带微带均衡器设计。     

一种以空气为基板的圆极化微带天线的设计

设计了一种以空气为基板的超高频（UHF）圆极化矩形微带天线。该天线通过在微带贴片四周与中心开槽,减小了天线尺寸,实现天线圆极化的性能。进一步研究了天线的参数对圆极化性能的影响,通过天线参数的优化,使天线达到了良好的圆极化性能。