Nitriding of titanium with plasma jet under reduced pressure

The nitriding of titanium with argon-nitrogen (3%) and argon-nitrogen (3%)-hydrogen (2%) plasma jets at pressures of 190 torr was studied. The reaction kinetics obeyed mainly a parabolic law. The parabolic kinetic constants were 10^–10–10^–8 g² cm^–4 s^–1, which were 2–3 orders of magnitude larger than those in R.F. discharges. From emission spectroscopy, nitrogen atoms in the excited states were observed. The nitrogen atoms can promote the nitriding reaction. The effect of the addition of hydrogen to nitrogen is also briefly discussed.     

Reduction of Chemical Reactions in Nitrogen and Nitrogen–Hydrogen Plasma Jets Flowing into Atmospheric Air

The large number of possible chemical reactions represents a severe burdenfor modeling of even relatively simple plasma systems. Reduced sets ofchemical reactions have been obtained for numerical simulations of nitrogenand nitrogen-hydrogen plasma jets flowing into an atmospheric airenvironment. The important or active reactions are determined based on asimplified reduction method. A reaction is considered active if it leadsto higher sensitivities than a specified cutoff sensitivity of 1%. Theactive reactions exert a significant influence on main plasma parameters,such as velocity, temperature, and species concentrations. The sensitivityanalysis for the specified systems shows that two NO reactions, known asZel'dovich reactions (N₂+ONO+N andNO+OO₂+N),⁽¹⁾ are both active in a nitrogenplasma jet. On the other hand, the latter is not active and may be omittedin a nitrogen–hydrogen plasma jet. A nitrogen–hydrogen plasmajet requires contribution of two active charge exchange reactions:N₂+N⁺N⁺ ₂+N andN+H+N+ +H, while only the former is needed in a nitrogen plasmajet. The dissociation reactions are all active in both plasma jets, exceptthe dissociation of OH.     

The Sialons MLn[Si4−xAlxOxN7−x] with M = Eu,Sr, Ba and Ln = Ho‐Yb – Twelve Substitution Variants with the MYb[Si4N7] Structure Type

The oxonitridoalumosilicates (so‐called sialons) MLn[Si_4?xAl_xO_xN_7?x] with M = Eu, Sr, Ba and Ln =Ho, Er, Tm, Yb were obtained by the reaction of the respective lanthanoid metal, the alkaline earth carbonates or europium carbonate, resp., AlN, “Si(NH)₂” and MCl₂ as a flux in a radiofrequency furnace at temperatures around 2100 °C. The compounds MLn[Si_4?xAl_xO_xN_7?x] are relevant for the investigation of substitutional effects on the materials properties due to their ability of tolerating a comparatively large phase width up to x ≈ 2.0(5). The crystal structures of the twelve compounds were refined from X‐ray single crystal data and X‐ray powder data and are found to be isotypic to the MYb[Si₄N₇] structure type. The compounds crystallize in space group P6₃mc (no. 186, hexagonal) and are made up of chains of so‐called starlike units [N^[4](SiN₃)₄] or [N^[4]((Si,Al)(O,N)₃)₄], respectively. These units are formed by four (Si,Al)(N/O)₄ tetrahedra sharing a common central nitrogen atom. The structure refinement was performed utilizing an O/N‐distribution model according to Paulings rules, i.e. nitrogen was positioned on the four‐fold bridging site and nitrogen and oxygen were distributed equally on both of the two‐fold bridging sites, resulting in charge neutrality of the compound. The Si and Al atoms were distributed equally on their two crystallographic sites, referring to their elemental proportion in the compound, due to being poorly distinguishable by X‐ray methods. The chemical compositions of the compounds were derived from electron probe micro analyses (EPMA).     

Supersonic jet spectroscopy of naphthalene–fluorene bichromophoric cluster

We have investigated the supersonic jet spectroscopy and photophysics of 1-methylnaphthalene–fluorene (1MN–FL) cluster, and looked for indications of intramolecular electronic energy transfer (Intra-EET) from the FL (donor, D) to 1MN (acceptor, A). The clusters were identified by their time of flight (TOF) mass spectra. We observed clusters bands in the LIF spectrum near the region of 1MN origin. We have also observed cluster TOF–resonance enhanced multi-photon ionization (REMPI) spectrum near the electronic origin of the fluorene moiety. However, this spectrum was almost independent of the excitation wavelength, and was not observed in the LIF spectrum. This is probably due to fast Intra-EET resulting in lifetime broadening of the donor chromophore cluster spectrum, similar to that observed previously for the naphthalene–anthracene bichromophoric system.     

Trace level analysis of volatile and semi-volatile organic compounds in water using a membrane/jet separator interfaced to an ion trap mass spectrometer

An ion trap mass spectrometer, equipped with a membrane/jet separator interface, is used for the direct detection of volatile and semi-volatile organic compounds in aqueous solutions. Aqueous sample is passed through a capillary membrane, the outside surface of which is continuously purged by helium. The permeate is pneumatically transported to the mass spectrometer via a jet separator which acts as an additional enrichment device. The performance and response characteristics of non-porous silicone and microporous polytetrafluoroethylene (PTFE) membranes are studied. The microporous membrane allows sufficient water to pass for it to be used as a reagent gas for chemical ionization. Both types of membranes provide detection limits in the parts per trillion (pptr) to parts per billion (ppb) range with a linear dynamic range of 3 orders of magnitude for some volatile organic compounds. Results show that there is no detectable matrix effect on response in the selected cases examined. The use of microporous membranes to analyze more polar compounds, such as 5-hydroxymethyl furfuraldehyde and lactic acid, is also demonstrated. The effects of other experimental parameters, such as membrane temperature and length, on sensitivity are also investigated.     

基于微纳电离的有毒有害气体传感器

为了有效避免有害气体浓度的超标对经济效益和人类生命财产安全造成损害,提出并设计了一种新型检测方法,通过对微纳电离型传感器进行一系列的测试,设计的传感器展现了较强的抗弯能力及较快的响应-恢复能力。在室温常压、相对湿度75%的实验条件下,对多个浓度的苯、甲苯气体展开了测试,并基于特征噪声强度识别气体的浓度,构建了对应的识别模型。实验结果表明：传感器对有害气体检测时的测量值和真实值的拟合度可达99%以上,体现了较高的检测精度,且在检测有害气体时传感器处于可逆电离平衡状态,重复性良好,不需要进行预热、安全无毒,因此适合于应用到苯类气体的检测中,能够满足效率、精度的要求,具备了一定的实用性。     

Ultraprecise 3D Printed Graphene Aerogel Microlattices on Tape for Micro Sensors and E-Skin

3D printed graphene aerogels hold promise for flexible sensing fields due to their flexibility, low density, conductivity, and piezo-resistivity. However, low printing accuracy/fidelity and stochastic porous networks have hindered both sensing performance and device miniaturization. Here, printable graphene oxide (GO) inks are formulated through modulating oxygen functional groups, which allows printing of self-standing 3D graphene oxide aerogel microlattice (GOAL) with an ultra-high printing resolution of 70 µm. The reduced GOAL (RGOAL) is then stuck onto the adhesive tape as a facile and large-scale strategy to adapt their functionalities into target applications. Benefiting from the printing resolution of 70 µm, RGOAL tape shows better performance and data readability when used as micro sensors and robot e-skin. By adjusting the molecular structure of GO, the research realizes regulation of rheological properties of GO hydrogel and the 3D printing of lightweight and ultra-precision RGOAL, improves the sensing accuracy of graphene aerogel electronic devices and realizes the device miniaturization, expanding the application of graphene aerogel devices to a broader field such as micro robots, which is beyond the reach of previous reports.     

高速列车受电弓气动噪声分析与空腔降噪研究

随着高速列车运行速度的不断提高,受电弓气动噪声也愈加严重。针对这一问题,文中采用LES大涡模拟、边界层噪声源模型和FW-H声类比法,通过建立某型号受电弓局部1:1气动噪声分析模型进行数值模拟。文中研究了受电弓各部位的气动噪声贡献量,还探究了针对较大噪声位置空腔采用射流降噪方法的降噪效果。结果表明,当网格总数为4 323万个时,数值模拟精确度满足要求。受电弓空腔上游和空腔中部绝缘子是气动噪声的主要来源。在射流降噪前后,空腔内部气动噪声均为宽频带噪声,主要能量集中在0~4 500 Hz。对250 km·h^-1行驶速度下的空腔进行主动射流降噪,距列车25 m远处的垂向监测点声压级最小值为81.65 dB,比降噪前降低了2.64 dB。     

Micro construction of poly(epsilon-caprolactone)/poly(L-lactic acid) blend film by solution casting under microwave irradiation

The micro construction of poly(epsilon-caprolactone) (PCL) and poly(L-lactic acid) (PLLA) blend films fabricated by solution casting under microwave irradiation was investigated by selective enzymatic degradation and scanning electron microscopy (SEM). The results were totally different from the blends obtained by conventional methods. The blend was more homogeneous and the PCL continuous phase more compact as no spherulites and tiny zone separation were observed from the film surface and no PCL network was observed inside the film, and the degradation of a PCL plank by Pseudomonas lipase was significantly retarded. The distributed PLLA micro spheres were enlarged and amorphous. The thermal behavior of the blend by microwave heating revealed that PCL and PLLA underwent a melting process, which induced the variations of the PCL phase and PLLA spheres. The weight loss caused by degradation of the PCL/PLLA blend obtained by conventional methods (B50c) is greater than that of the blend obtained by microwave methods (B50m), which reflects the change in morphology from a loose PCL network (B50c) to a dense PCL plank (B50m).     

Kinetics of the surface tension of micellar solutions: Comparison of different experimental techniques

The kinetics of the surface tension of micellar solutions of nonionic surfactant Triton X-100 is measured experimentally by means of three different techniques: oscillating jet, maximum bubble pressure and inclined plate. They allow to study the micellization kinetics at various time scales (from a few milliseconds to a few seconds) in fairly large concentration region up to 50 times CMC. The experimental data are satisfactorily explained by a theoretical model accounting for the kinetics of micellization, diffusion of surfactant species and expansion of the bubble interface. By this model are computed the characteristic times of diffusion and micellization, which are of comparable magnitude (about 5 to 200 ms), and the Gibbs' elasticity. The micellization time constant corresponds to the slow relaxation process known to coincide with the disintegration of micelles. Comparing our data with other data from literature one can conclude that more realistic information for the micellization kinetics is obtained by the maximum bubble pressure and the oscillating jet method. The inclined plate seems too slow to measure the relaxation processes in micellar solutions of this surfactant.