Preparation of polymer-protected Pt/Co bimetallic colloid and its catalytic properties in selective hydrogenation of cinnamaldehyde to cinnamyl alcohol

A polymer-protected Pt/Co bimetallic colloid with a molar ratio of 3:1 has been prepared by a polyol process. Over the above Pt/Co bimetallic colloid catalyst, cinnamaldehyde can be selectively hydrogenated to cinnamyl alcohol with 99.8% selectivity at 96.2% conversion.     

基于微燃机的HAT循环变工况性能分析

基于某微燃机构建了HAT循环,研究了其在功率下降(ISO条件)、环境温度变化时的变工况性能,并与简单循环、回热循环和RWI(注水回热)循环的设计工况、变工况性能进行了对比。结果表明, HNI、循环和RWI循环的变工况性能相似且好于简单循环和回热循环。其中,空气湿化程度的调整对于HAT循环变工况性能的稳定性起重要作用。但由于没有设置中冷器,且微燃机循环中可资利用的(火用)较少,HAT循环设计工况和变工况性能相对于其它循环的优势没有得到充分体现。     

水平微细圆管内膜状凝结换热特性的研究

实验研究了微细圆管内凝结换热特性,实验中采用四种不锈钢管,其内径范围为289-997μm。基于实验结果, 分析了换热温差、蒸汽进口雷诺数Rein和管径对管内膜状凝结换热系数的影响,发现温差对管内膜状凝结换热的影响很小, Nu随蒸汽进口雷诺数Rein增加而增大,随管径减小而降低,而对流换热系数随管径减小而显著增大。     

微钢管内部强迫对流换热的实验研究

本文对以蒸馏水为工质,流过内径和外径分别为168μm、406μm和399μm、798μm的电加热不锈钢管时的换热进行了实验研究。通过对微钢管直接通电进行加热,并采用红外成像仪及专用放大镜头的非接触式方法,获得了各种恒定加热功率及不同雷诺数下的微钢管壁面的温度场分布,进而得到较为精确的壁面平均温度。由此计算了在层流态下的换热系数Nu数。实验结果表明,在层流下,内径为168μm及399μm的微钢管内部的Nu数分别比经典的Hansen准则式所得到的Nu数高出很多。     

Hydrodynamic instability of premixed flame propagating in narrow planar channel in the presence of gas flow

The paper analyses the hydrodynamic instability of a flame propagating in the space between two parallel plates in the presence of gas flow. The linear analysis was performed in the framework of a two-dimensional model that describes the averaged gas flow in the space between the plates and the perturbations development of two-dimensional combustion wave. The model includes the parametric dependences of the flame front propagation velocity on its local curvature and on the combustible gas velocity averaged along the height of the channel. It is assumed that the viscous gas flow changes the surface area of the flame front and thereby affects the propagation velocity of the two-dimensional combustion wave. In the absence of the influence of the channel walls on the gas flow, the model transforms into the Darrieus–Landau model of flame hydrodynamic instability. The dependences of the instability growth rate on the wave vector of disturbances, the velocity of the unperturbed gas flow, the viscous friction coefficients and other parameters of the problem are obtained. It is shown that the viscous gas flow in the channel can lead, in some cases, to a significant increase in instability compared with a flame propagating in free space. In particular, the instability increment depends on the direction of the gas flow with respect direction of the flame propagation. In the case when the gas flow moves in the opposite direction to the direction of the flame propagation, the pulsating instability can appear.     

微粉型四钼酸铵热容的测定

Single phase of ammonium tetramolybdate in the micro power form was prepared from polyphase ammonium paramolybdate. Its heat capacity from 14.25℃ to 120.12 ℃ was measured by drop method and the result is
Cp=0.3936+7.4047×10-4T+6.3543×10-3T-2(J•K-1•g-1)     

基于社会性科学议题的化学微项目学习*——以“物质的性质与转化”单元复习为例

在化学课堂中开展社会性科学议题的教学能够发展学生的社会参与意识,结合微项目学习模式,从课堂教学角度出发,构建选定项目、启动项目、实施项目、交流成果等4个教学流程,确立实施教学的核心问题,设计了鲁科版高一化学“物质的性质与转化单元复习课”,进行了基于社会性科学议题的化学微项目学习的实践教学,结合实践的基本情况提出4点反思。     

Non-Lithography Hydrodynamic Printing of Micro/Nanostructures on Curved Surfaces

A key issue of micro/nano devices is how to integrate micro/nanostructures with specified chemical components onto various curved surfaces. Hydrodynamic printing of micro/nanostructures on three-dimensional curved surfaces is achieved with a strategy that combines template-induced hydrodynamic printing and self-assembly of nanoparticles (NPs). Non-lithography flexible wall-shaped templates are replicated with microscale features by dicing a trench-shaped silicon wafer. Arising from the capillary pumped function between the template and curved substrates, NPs in the colloidal suspension self-assemble into close-packed micro/nanostructures without a gravity effect. Theoretical analysis with the lattice Boltzmann model reveals the fundamental principles of the hydrodynamic assembly process. Spiral linear structures achieved by two kinds of fluorescent NPs show non-interfering photoluminescence properties, while the waveguide and photoluminescence are confirmed in 3D curved space. The printed multiconstituent micro/nanostructures with single-NP resolution may serve as a general platform for optoelectronics beyond flat surfaces.     

Microstructure of metallic copper nanoparticles/metallic disc interface in metal–metal bonding using them

This paper describes a metal–metal bonding technique using metallic Cu nanoparticles prepared in aqueous solution. A colloid solution of metallic Cu particles with a size of 54 ± 15 nm was prepared by reducing Cu²⁺ (0.01 M (CH₃COO)₂Cu) with hydrazine (0.6 M) in the presence of stabilizers (5 × 10^?4 M citric acid and 5 × 10^?3 M cetyltrimethylammonium bromide) in water at room temperature in air. Discs made of metallic materials (Cu, Ni/Cu, or Ag/Ni/Cu) were successfully bonded under annealing at 400 °C and pressurizing at 1.2 MPa for 5 min in H₂ gas with help of the metallic Cu particle powder. Shear strength required for separating the bonded discs was 27.9 ± 3.9 for Cu discs, 28.1 ± 4.1 for Ni/Cu discs, and 13.8 ± 2.6 MPa for Ag/Ni/Cu discs. Epitaxial crystal growth promotes on the discs with a good matching for the lattice constants between metallic nanoparticles and metallic disc surfaces, which leads to strong bonding. Copyright © 2013 John Wiley & Sons, Ltd.