Electrochemiluminescence Behavior of Ru(bpy)32+/Carbofuran System on an Electrically Heated Microelectrode Chip

An electrically heated microelectrode chip (HMEC) was designed and the Ru(bpy)₃²⁺/carbofuran electrochemiluminescence (ECL) systems were applied to characterize the performance of the HMEC. The ECL intensities increase at elevated electrode temperature, and the detection limit at 60°C (electrode surface temperature) was about 10 times lower than that at 30°C. The results indicate that new heated electrode can be handled easily and can be mass produced, the difference between the electrodes was little. The stability of the HMEC was good since the electrode surface can hardly be destroyed during detection and storage.     

Micro construction of poly(epsilon-caprolactone)/poly(L-lactic acid) blend film by solution casting under microwave irradiation

The micro construction of poly(epsilon-caprolactone) (PCL) and poly(L-lactic acid) (PLLA) blend films fabricated by solution casting under microwave irradiation was investigated by selective enzymatic degradation and scanning electron microscopy (SEM). The results were totally different from the blends obtained by conventional methods. The blend was more homogeneous and the PCL continuous phase more compact as no spherulites and tiny zone separation were observed from the film surface and no PCL network was observed inside the film, and the degradation of a PCL plank by Pseudomonas lipase was significantly retarded. The distributed PLLA micro spheres were enlarged and amorphous. The thermal behavior of the blend by microwave heating revealed that PCL and PLLA underwent a melting process, which induced the variations of the PCL phase and PLLA spheres. The weight loss caused by degradation of the PCL/PLLA blend obtained by conventional methods (B50c) is greater than that of the blend obtained by microwave methods (B50m), which reflects the change in morphology from a loose PCL network (B50c) to a dense PCL plank (B50m).     

Enhanced biocompatibility in biostable poly(carbonate)urethane

In this work, we synthesized two MDI-based polyurethanes, including a poly(ether)urethane (PEU) and a poly(carbonate)urethane (PCU), by using different soft segments, poly(tetramethylene oxide) and poly(hexyl, ethyl)carbonate diol (M approximately 2,000). We demonstrated that, in addition to the enhanced biostability of PCU over PEU, the biological performances of PCU in vitro were also improved in general. These included, better cellular attachment and proliferation, less platelet activation, as well as reduced monocyte activation. The unusual wide-ranging enhancement in biocompatibility for PCU was believed to be related to the larger micro-phase separation in PCU (approximately 25 nm) that caused distinct protein adsorption on the surface. The total number of adherent monocytes (nonactivated and activated) on the bare sample surfaces, albumin pre-adsorbed sample surfaces, and fibrinogen pre-adsorbed sample surfaces.     

应用可视芯片技术高通量鉴别8种鱼成分

为探索鱼肉品种快速鉴别方法,以鱼类小清蛋白基因为靶标,设计了多宝鱼、银鲳鱼、金枪鱼、暗纹东方鲀、青石斑鱼、带鱼、大黄鱼以及东星斑鱼8种鱼的通用引物以及特异性探针,利用可视芯片技术,建立了一种鱼肉品种的高通量快速检测方法。该方法特异性好、灵敏、通量高,可同时准确鉴别8种鱼成分,检测灵敏度均可达0.1 ng/μL,且结果肉眼可见。该方法在鱼肉及其制品掺假现场快速筛查方面具有较大应用潜力。     

Biochemical sensors: The state of the art

The basic components of a (bio)chemical sensor and the main concepts involved in the (bio)chemical sensor methodology are considered in order to depict the state of the art of the development of research in this field, paying special attention to the evolution of the published scientific literature in analytical chemistry.     

氧化亚铜微/纳米结构的形貌可控制备及光催化和防污性能

利用简便易行的液相法,采用葡萄糖为还原剂,通过调整加料方式、反应温度、NaOH用量等条件,实现具有{110}截面八面体、八面体和短足形等形貌的Cu₂O微/纳米结构的可控制备,运用透射电子显微镜、扫描电子显微镜、紫外可见分光光度计等对产物进行组成、结构、形貌和光响应的表征,对Cu₂O的形貌结构和生长机理进行研究。对比和优化了具有不同形貌的Cu₂O微/纳米结构对甲基橙染料的光催化性能。将不同形貌的微/纳米Cu₂O作为防污剂复配的自抛光防污涂料,涂层磨蚀率、接触角与实海挂板实验证明该涂料具有良好的防污性能。     

Biparametric potentiometric analytical microsystem for nitrate and potassium monitoring in water recycling processes for manned space missions

The construction and evaluation of a Low Temperature Co-fired Ceramics (LTCC)-based continuous flow potentiometric microanalyzer prototype to simultaneously monitor the presence of two ions (potassium and nitrate) in samples from the water recycling process for future manned space missions is presented. The microsystem integrates microfluidics and the detection system in a single substrate and it is smaller than a credit card. The detection system is based on two ion-selective electrodes (ISEs), which are built using all-solid state nitrate and potassium polymeric membranes, and a screen-printed Ag/AgCl reference electrode. The obtained analytical features after the optimization of the microfluidic design and hydrodynamics are a linear range from 10 to 1000 mg L⁻¹ and from 1.9 to 155 mg L⁻¹ and a detection limit of 9.56 mg L⁻¹ and 0.81 mg L⁻¹ for nitrate and potassium ions respectively.     

微阀进样和固定化试剂化学发光微流动注射芯片的研究

设计了一种将微注样阀和发光试剂均集成化的微流动注射化学发光芯片。利用luminolK3Fe(CN)6H2O2化学发光体系,研究了这种芯片的分析特性。该芯片测定H2O2的线性范围为2×10-5～8×10-9mol/L;检出限为3.6×10-9mol/L;相对标准偏差RSD=4.4%(c=1×10-6mol/L,n=11)。与常规的流动注射化学发光分析法相比,该芯片具有简单、快速、灵敏度高、耗样量少等特点,并结合酶促反应成功地用于人体血清中葡萄糖的测定。     

Hyphenation of optimized microfluidic sample preparation with nano liquid chromatography for faster and greener alkaloid analysis

A glass liquid–liquid extraction (LLE) microchip with three parallel 3.5 cm long and 100 μm wide interconnecting channels was optimized in terms of more environmentally friendly (greener) solvents and extraction efficiency. In addition, the optimized chip was successfully hyphenated with nano-liquid chromatography with ultraviolet and mass spectrometric detection (nanoLC–UV–MS) for on-line analysis. In this system, sample pretreatment, separation and detection are integrated, which significantly shortens the analysis time, saves labor and drastically reduces solvent consumption. Strychnine was used as model analyte to determine the extraction efficiency of the optimized 3-phase chip. Influence of organic solvent, pH of feed phase, type of alkaloid, and flow rates were investigated. The results demonstrated that the 3-phase chip nanoLC–UV/MS hyphenation combines rapid (∼25 s) and efficient (extraction efficiency >90%) sample prep, with automated alkaloid analyses. The method was applied to real samples including Strychnos nux-vomica seeds, Cephaelis ipecacuanha roots, Atropa belladonna leaves, and Vinca minor leaves.