Preparation,properties, and application of polypropylene micro/nanofiber membranes

Nanofiber membranes have huge potential applications in many areas due to their unique properties. However, the thermoplastic micro/nanofiber membranes were rarely reported. In this paper, polypropylene (PP) nanofibers were prepared by melt extrusion of immiscible blends of PP, cellulose acetate butyrate (CAB), and subsequent removal of the CAB matrix. The wet‐laid application was used to make PP nanofiber membranes and PP‐g‐MAH/nonwoven micro/nanofiber membrane. The properties of membranes including morphology, apparent density, porosity, contact‐angle, pore size distribution, and water flux were characterized. The results showed that the consequent membranes were provided with optimistic porosity and pore size distribution. Moreover, they were all with high pure water fluxes, which were superior to that of PP microporous membrane. They performed an excellent separation performance of TiO₂ suspension and dyeing wastewater. The work revealed this method could be an efficient one to make thermoplastic polymer micro/nanofiber membranes, and they would have a brilliant potential application for water treatment. Copyright © 2010 John Wiley & Sons, Ltd.     

Effects of external electromagnetic fields on the conformational sampling of a short alanine peptide

Non‐equilibrium molecular dynamics simulations of a solvated 21‐residue polyalanine (A21) peptide, featuring a high propensity for helix formation, have been performed at 300 K and 1 bar in the presence of external electromagnetic (e/m) fields in the microwave region (2.45 GHz) and an r.m.s. electric field intensity range of 0.01–0.05 V/Å. To investigate how the field presence affects transitions between the conformational states of a protein, we report 16 independent 40 ns‐trajectories of A21 starting from both extended and fully folded states. We observe folding‐behavior of the peptide consistent with prior simulation and experimental studies. The peptide displays a natural tendency to form stable elements of secondary structure which are stabilized by tertiary interactions with proximate regions of the peptide. Consistent with our earlier work, the presence of external e/m fields disrupts this behavior, involving a mechanism of localized dipolar alignment which serves to enhance intra‐protein perturbations in hydrogen bonds (English, et al., J. Chem. Phys. 2010 , 133, 091105), leading to more frequent transitions between shorter‐lifetime states. © 2012 Wiley Periodicals, Inc.     

Laser in micro and nanoprocessing of diamond materials

Basic processing operations will be presented. These include diamond polishing and shaping, production of conductive pathways, micro‐ and nanostructures on the diamond surface, such as diffractive optical elements. The possibility to laser produce conductive and hollow structures in the diamond bulk, including curved elements, will be demonstrated. Finally, the techniques of laser assisted diamond CVD, that allow production of smooth or selective‐area grown films will be presented     

基于FPGA驱动微陀螺旋转的移相电路

传统的微陀螺转子驱动电路采用对模拟信号直接移相实现,为了解决模拟信号直接移相时移相范围有限、调试复杂等不足,设计出了基于FPGA的数字式驱动微陀螺旋转移相电路。通过FPGA产生相位差信号,经D/A转换电路和巴特沃兹滤波电路处理后输出信号。该数字式移相方法产生的信号的相位差（0°～360°）、频率均可调,为涡流旋转微陀螺转子提供了理想的信号源。     

基于小型电磁动力驱动器的微流道混合控制研究

对于许多微流体应用系统来说,流体的混合是至关重要的.本文研究了基于电磁流体动力混合器的微流道主动混合控制方法,建立了该微流道混合系统的理论模型并进行了数值模拟.在交变Lorentz驱动下,流经混合器流道的流体及其分界面在混合器流道内往复运动,流体界面的反复折叠与流体局部流动使流体混合,流体的横向往复运动使流体分界面反复折叠从而使流体间的接触面积大大增加.对流体混合过程进行了讨论并给出了漉体混合程度评价方法.     

AlN靶材射频磁控溅射制备AlN薄膜及性质研究

以AlN作为靶材,使用射频磁控溅射法在Si（100）和玻璃衬底上,在纯氮气气氛条件下制备得到AlN薄膜,并研究了衬底温度对溥膜的结构,形貌和性质的影响．实验表明,衬底温度为370℃的条件下制备的AlN溥膜具有C轴择优取向,薄膜表面均匀、致密和平整,均方根粗糙度为4．83nm．随着基片温度的增加,溥膜的折射率增加,对应着薄膜从非晶态到晶态过程的演变．     

The effect of discharge conditions of ICP etching reactor on plasma parameters

This study investigated the inductively coupled plasma etching reactor and RF coils developed by North Microelectronic Corporation. Full three dimensional simulations were made at different discharge conditions. The simulations examined and compared the distribution and non-uniformity of several plasma parameters at a fixed position upon the wafer at different pressures and coil currents. These parameters included electron density, electron temperature and power deposition. The results demonstrate that the electron density, power deposition and uniformity increase with either higher pressure or stronger coil currents, while the electron temperature decreases at this condition. Coil number increase can reduce the non-uniformity of parameters in the spatial distribution. The linear relationship between power deposition and electron density does not always exist. The comparison between simulation results and experiment results is also presented in the paper.     

Velocity distribution of flow with submerged flexible vegetations based on mixing-length approach

By choosing a PVC slice to simulate flexible vegetation, we carried out experiments in an open channel with submerged flexible vegetation. A 3D acoustic Doppler velocimeter （micro ADV） was used to measure local flow velocities and Reynolds stress. The results show that hydraulic characteristics in non-vegetation and vegetation layers are totally different. In a region above the vegetation, Reynolds stress distribution is linear, and the measured velocity profile is a classical logarithmic one. Based on the concept of new-riverbed, the river compression parameter representing the impact of vegetation on river is given, and a new assumption of mixing length expression is made. The formula for time-averaged velocity derived from the expression requires less parameters and simple calculation, and is useful in applications.     

微/纳尺度接触问题计算方法研究进展

接触问题广泛存在于现实生活的众多领域,近来随着微/纳米技术的不断发展,接触力学在基础理论和研究方法上面临许多新的挑战.本文在摩擦学的范畴内,对近年发展的若干求解微/纳尺度接触问题的计算方法及理论进行了综述.按发展先后及所解决问题的尺度范围划分,主要有3类评估微/纳尺度接触性能的计算方法:(1)连续介质力学方法;(2)分子动力学模拟; (3)多尺度方法.介绍了这3类计算方法的典型理论和主要数学描述,给出了这些方法对解决若干微/纳观接触问题如黏着效应、粗糙表面描述、表面摩擦及润滑、表面热效应、生物接触等的主要应用.最后, 探讨了微/纳尺度接触问题计算方法可能的发展方向及应用领域.      

降维变分方法

依据能量原理建立降维变分法,该方法将物体离散为条,在一定约束下,一条独立求解能量极值,可有效简化数值计算,本文研究分条离散方法,极值约束,边界条件处理并给出证明.更重要的,该方法揭示了新的物体形变运动规律.在此也做了分析.