Er3+掺杂Li2O-SrO-ZnO-Bi2O3玻璃中Er3+离子在1.53 μm处的荧光发射特性

采用传统的熔融法制备了Er~(3+)掺杂的新型铋酸盐玻璃(Li_2O-SrO-ZnO-Bi_2O_3,LSZB),并对其光谱性质进行了表征,分析了玻璃的拉曼光谱、吸收光谱、荧光光谱,利用Judd-Ofelt理论研究了其荧光特性。LSZB玻璃样品中Er~(3+)的~4I_(13/2)→~4I_(15/2)跃迁发射峰位于1.53 μm处,半高宽约为78 nm。样品中Er~(3+)的~4I_(13/2)能级寿命为2.848 ms,量子效率为99.93%,受激发射截面达到9.76×10~(-21)cm~2。以上结果显示,Er~(3+)掺杂LSZB玻璃有良好的光谱特性。     

On the Nano/Micro-Mechanics of Metallic Glass

Metallic glass (MG) is amorphous and has some outstanding properties such as ultrahigh strength, superior elasticity, and excellent thermo-plasticity. However, as MG is relatively new to the metal family, the relationship between its physical properties and amorphous structure is still unclear. This article aims to provide an insightful discussion through a comprehensive review about the investigations in the past few decades on the scientific mechanisms of this class of material. The discussion of the paper will include the following key aspects: (1) the formation mechanism of an amorphous structure through glass transition, (2) the structural characterization and models, (3) the micromechanics of plastic event and shear band, and (4) the correlation between the amorphous structure and its mechanical properties.     

Effect of cooling rate in [(Fe0.5Co0.5)0.75B0.2Si0.05]100-xNbx alloy system on magnetic properties

The effect of cooling rate on the thermal stability and soft magnetic properties of [(Fe_0.5Co_0.5)_0.75B_0.2Si_0.05]_100-xNb_x (x = 5, 6, 7, 8 at. %) system was investigated. The alloys were produced into the form of ribbon and cylindrical rod by melt-spinning and injection casting, respectively. Their structure, thermal, mechanical and soft magnetic properties were investigated by x-ray diffraction, differential scanning calorimetry, universal testing machine and vibrating sample magnetometer, respectively. All of the alloys were identified as fully amorphous by X-ray diffraction. It turned out that the rod samples had exceptionally high saturation fields reaching 3.0 kOe, which is key properties for sensor application. Also, among these Fe,Co-based samples, the Fe_35.25 Co_35.25 B_18.8 Si_4.70 Nb₆ ribbon exhibits the highest saturation magnetization with 142.1 emu/g.     

Fabrication of Cu2ZnSn(SxSe1−x)4 thin film solar cell by single step sulfo-selenization of stacked metallic precursors

We have synthesized an efficient Cu₂ZnSn(S_xSe_1−x)₄ (CZTSSe) absorbers by using single-step rapid thermal sulfo-selenization process of sputtered stack metallic precursor (Zn/Sn/Cu) films. The structural and morphological studies confirm that the suitability of the rapid thermal sulfo-selenization process for the synthesis of a CZTSSe absorber without any secondary phases with large grains. The annealing atmosphere with a mixed-chalcogen source enhances the grain growth of the CZTSSe absorber as compared with pure Cu₂ZnSnS₄ (CZTS) and Cu₂ZnSnSe₄ (CZTSe) absorbers. The CZTSSe thin film solar cell shows the best conversion efficiency of ∼7%.     

Effects of Edge Oxidation on the Stability and Half‐Metallicity of Graphene Quantum Dots

A comprehensive first‐principles theoretical study of the electronic properties and half‐metallic nature of zigzag edge‐oxidized graphene quantum dots (GQDs) is carried out by using density functional theory (DFT) with the screened exchange hybrid functional of Heyd, Scuseria and Ernzerhof (HSE06). The oxidation schemes include ‐OH, ‐COOH and ‐COO groups. We identify oxidized GQDs whose opposite spins are localized at the two zigzag edges in an antiferromagnetic‐type configuration, showing a spin‐polarized ground state. Oxidized GQDs are more stable than the corresponding fully hydrogenated GQDs. The partially hydroxylated and carboxylated GQDs with the same size exhibit half‐metallic state under almost the same electric‐field intensity whereas fully oxidized GQDs behave as spin‐selective semiconductors. The electric‐field intensity inducing the half metal increases with the length of the partially oxidized GQDs, ranging from M=4 to 7.     

Optical Spectroscopy and Excited-State Dynamics of Eu3+-Doped Bismuth Borate Glasses Containing CuO

Bismuth borate glasses containing phosphors and luminescent rare-earths are of interest for applications in light-emitting devices. Herein, the influence of CuO impurities on red-emitting Eu³⁺-doped bismuth borate glasses of the 25Bi₂O₃-15BaO-10Li₂O-50B₂O₃ type was investigated by various spectroscopic methods. The glasses were prepared by the melt-quench technique and characterized by X-ray diffraction (XRD), Fourier transform-infrared (FT-IR) spectroscopy, UV/Vis optical absorption (OA), and photoluminescence (PL) spectroscopy including decay kinetics assessment. The XRD data confirmed the amorphous nature of the glasses whereas FT-IR spectra indicated the basic structural features of trigonal BO₃ units and BO₄ tetrahedra. The OA analysis showed that addition of CuO up to 0.5 mol% results in significant growth of the visible Cu²⁺ absorption band around 715 nm, with slight decrease in the optical band gap energies assessed through Tauc plots. A drastic PL quenching of Eu³⁺ ions emission was evidenced concurring with the detrimental effect of Cu²⁺. The assessment of the Eu³⁺ emission decay curves revealed significant lifetime decrease of the ⁵D₀ emitting state with increasing CuO concentration. An analysis of quenching constants was finally performed comparing results from integrated PL data with the emission decay rates. It is argued that the bismuth borate glass system supports an effective Eu³⁺→Cu²⁺ energy transfer (more so than phosphates) in connection with a strong spectral overlap between Eu³⁺ emission and Cu²⁺ absorption.     

Sn-Ag-Cu焊料中金属间化合物对焊接性能的影响

讨论了Sn-Ag-Cu焊料与Cu焊盘间在回流焊过程中形成的金属间化合物(IMC)的种类、形态,Ag含量和Cu含量对IMC的影响,IMC在老化过程中的生长演变及其对焊接性能的影响。结果表明:Sn-Ag-Cu焊料与Cu焊盘之间的金属间化合物主要是Cu6Sn5和长针状的Ag3Sn,Ag和Cu的添加对组织有明显细化作用,但过量添加会影响IMC的性能。IMC的演变主要是与老化温度、老化时间有关,较厚的IMC不利于焊接性能的提高。     

Ce对Sn-Ag-Cu系焊料合金的组织与性能影响

通过添加稀土Ce研究了Sn-3.0Ag-2.8Cu系焊料合金的显微组织和性能。用光学显微镜、SEM、EDX对其显微组织进行分析,并且对其导电性,润湿性,硬度等重要性能进行测试。结果表明,添加稀土w(Ce)为1%焊料合金的导电性明显提高;而润湿角明显减小,润湿性增强;同时焊料合金的硬度也有所增加。     

Ag对Sn-9Zn合金钎料组织及性能的影响

用莱卡显微镜、XRD研究添加元素Ag对Sn-9Zn钎料组织及性能的影响。结果表明:Ag与Zn形成AgZn3化合物,能抑制粗大针状富Zn相的形成,可使Sn-9Zn钎料合金的润湿性提高20%,并明显改善Sn-9Zn的耐蚀性。     

卵形钢弹对铝合金靶板侵彻问题的数值模拟

 基于球形空穴膨胀理论（SCE）,采用ABAQUS有限元商业软件并结合其子程序的二次开发功能对钢弹侵彻金属靶进行3D有限元数值模拟。根据空穴膨胀理论,靶体对侵彻弹体的影响可以用一个作用在弹体表面的力函数代替,这样在进行数值模拟时就无须划分靶体网格,也避免了复杂的接触问题,从而使模拟大大简化。模拟所用卵形弹为VAR 4340钢弹,靶体为6061-T6511铝合金。模拟过程中考虑到弹体的可变形性和入射时的微小偏航角等实际情况,并且考虑到了弹身在运动过程中和靶体的接触分离效应。所得模拟结果与文献中的实验结果进行了比较,发现模拟结果与实验结果吻合得很好,并得到了一些有意义的推论。