Study of formation of nano-quasicrystals and crystallization kinetics of Zr-Al-Ni-Cu metallic glass

The formation of nano-quasicrystals on isothermal annealing of melt-spun ribbons of Zr_69.5Al_7.5Ni₁₁Cu₁₂ metallic glass has been investigated using transmission electron microscopy (TEM). The crystallization study of this metallic glass has been carried out using differential scanning calorimetry (DSC) in non-isothermal (linear heating) mode. It exhibits two-stage crystallization where the first stage corresponds to the precipitation of icosohedral nano-quasicrystalline phase. This has been confirmed with the help of TEM investigations. The crystallization parameters like the activation energy (E _c) and frequency factor (k ₀) have been derived using the Kissinger peak shift analysis. The activation energies for the first and second crystallization peak are found to be 278 and 295 kJ mol^–1, respectively. The frequency factors obtained for the two peaks are respectively 7.16·10¹⁹ and 1.42·10²⁰ s^–1. E _c, k ₀ and the Avrami exponent (n) have also been derived by fitting the Johnson-Mehl-Avrami-Kolmogorov (JMAK) equation for the transformed volume fraction (x) to the crystallization data. JMAK results of E _c for the first and second crystallization peak turn out to be 270 and 290 kJ mol^–1 respectively. However, k ₀ and n are found to be heating rate dependent as reported in similar studies. The values of n for the first crystallization stage ranges between 1.66 and 2.57 indicating diffusion-controlled transformation in agreement with earlier reports.     

High Temperature Behavior of a Gel-Derived SiOC Glass: Elasticity and Viscosity

The high temperature behavior of a sol-gel derived silicon oxycarbide glass containing 12 at.% carbon has been characterized by means of creep and in-situ ultrasonic echography measurements. Temperature induced changes include structural relaxation and densification from 1000 to 1200°C, and crystallization to form a fine and homogeneous -SiC/glass-matrix nanocomposite with 2.5 nm large crystals above 1200°C. Young's modulus measurements clearly reveal a consolidation of the material upon annealing below 1200°C. Crystallization is almost complete after few hours at 1300°C and results in a significant increase in Young's modulus. The viscosity of the oxycarbide glass is much higher than that of fused silica, with two orders of magnitude difference at 1200°C, and the glass transition temperature ranges from 1320 to 1370°C.     

金属离子对CdS量子点/聚酰胺-胺树形分子纳米复合材料光致发光性能的影响

以聚酰胺-胺树形分子为模板制备了分散好、尺寸均匀的CdS量子点，并用分光光度滴定法研究了Cd²⁺、Zn²⁺、Pb²⁺、Cu²⁺、Mn²⁺几种金属离子对其光致发光性能的影响。发现不同离子对CdS量子点的发光性能影响不同:Cd²⁺和Zn²⁺使量子点荧光增强，Pb²⁺、Cu²⁺和Mn²⁺使其荧光有不同程度淬灭。这归因于金属离子对CdS量子点表面的修饰作用。Cd²⁺能减少由S^2-悬键构成的非辐射复合中心，增强树形分子对量子点表面缺陷的钝化作用，并能在量子点周围形成类肖特基能垒，从而显著增大CdS量子点的光致发光效率。由于ZnS与CdS的晶格参数非常接近，Zn²⁺能起到与Cd²⁺类似的作用，使CdS量子点的发光效率大大增强。Pb²⁺和Cu²⁺能取代Cd²⁺在CdS量子点表面生成窄带隙的壳层，对其发光有很强的淬灭作用。由于块体PbS的带隙比块体CuS窄，故Pb²⁺的淬灭能力强于Cu²⁺。Mn²⁺能破坏Cd²⁺与PAMAM树形分子的配位键，降低树形分子对CdS量子点表面缺陷的钝化作用，且其本身在量子点表面构成了新的荧光淬灭中心，但Mn²⁺也能形成较弱的类肖特基能垒，故对量子点的发光淬灭作用较弱。     

Thermal properties of fluoride glasses and their gel precursors

Xerogels were prepared from zirconium, barium, aluminum, lanthanum and lithium acetates, corresponding to a Li containing ZBLA composition. The study of their thermal properties (DSC, TG/DTG, FT-IR) showed that they might be used as chemically stable precursors in the preparation of fluoride glasses. Hydrofluoric acid in solution was chosen as a mild fluorinating agent. This newly proposed technique of fluorinating allowed to obtain high quality ZBLALi glass which presents the advantage of higher thermal stability and homogeneity in comparison with the glass obtained using individual commercial fluorides.This revised version was published online in November 2005 with corrections to the Cover Date.     

MEASUREMENTS OF CHAIN INTERPENETRATION OF POLYMER GLASSES

The concept of entanglement provides the basis of our current understanding of the flow behavior of polymer melts, Current techniques developed to investigate the degree of interpenetration of polymer chains only provide indirectly the information of the degree of entanglement in a relatively large scale （several to tens of nanometer）. In this article, we report ^1H-NMR spectroscopy with dipolar filters under fast magic angle spinning for probing chain interpenetration of polymer glasses at the molecular level.     

Charge transfer complexes and salts of ionenes

A review of the synthesis and properties of ionenes is presented. Particular attention is paid to the electrical and related properties of conductive teteracyano-p-quinodimethane (TCNQ) complex salts of ionenes containing ammonium or sulfonium groups in the main chain and to their chemical stability. The recent work on preparation of such ionenes with inorganic and organic counterions which show interesting linear and nonlinear optical properties is also discussed. It is shown that in the solid state ionenes act as a kind of a matrix fixing, in a chemically controlled way, positions and distribution of different kinds of counterions. Because the reaction of counterion exchange is easy in the case of ionenes it provides a convenient way to prepare a broad class of polyelectrolytes with many different properties.     

金属载体催化剂的涂层研究

在高温氧化处理不同时间的金属载体箔片上涂覆MgAl2O4/Al2O3过渡涂层,利用TG-DSC,XRD,SEM,BET和超声振动等分析测试技术,对载体和涂层的微观结构与表面特性进行研究.结果表明,在950 ℃下高温氧化5 h,箔片表面生成板状Al2O3晶须,有利于增强涂层与箔片的附着力.在载体表面涂覆一层MgAl2O4/Al2O3过渡涂层,有助于提高活性组分与金属载体的结合力,可以获得高结合强度的涂层结构,促使活性元素高度分散.     

Catalytic Combustion of Methane over CO1-xMgxO/Al2O3/FeCrAl Monolithic Catalysts

A series of CoxMgxO/Al2O3/FeCrAl catalysts （x=0-1） were prepared. The structures of the catalysts were characterized using XRD, SEM, and TPR analyses. The catalytic activity of the catalysts for methane combustion was evaluated in a continuous flow microreactor. The results indicated that the active washcoats adhered well on the FeCrAl foils. The phases in the catalysts were Co--xMgxO solid solutions, α-Al2O3, and γ-Al2O3. The surface particle size of the catalysts varied with variations in the molar ratios of Co to Mg. The Co component of the Co1_xMgxO/Al2O3/FeCrAl catalysts played an important role in the catalytic activity for methane combustion. In the Co1-xMgxO/AluO3/FeCrAl series catalyst （x=0.2-0.8）, the catalytic activity in terms of x was in the order of 0.5〉0.2〉0.8 under the experimental conditions. The presence of Mg in these catalysts could promote the thermal stability to a large extent. There were strong interactions between the Co1-xMgxO oxides and the AluO3/FeCrAl supports.     

IR-spectral investigation of the structure of glasses in the Fe2O3-V2O5 system

The structure of glasses in the Fe₂O₃-V₂O₅ system in the 0–50 mol% Fe₂O₃ range is studied by IR-spectroscopy. It is found that the introduction of Fe₂O₃ favours the transformation of the VO₅-groups into VO₄ ones. This effect may be shown with the aid of IR-spectra, owing to the fact that these glasses are characterized by two high-frequency bands at 1020 and 930 cm^–1. The first is determined by the vibrations of the short V=O nonbridging bonds in the VO₅-groups, while the second is assigned to the vibrations of the V—O-bonds in deformed VO₄-tetrahedra.

---

IR-spektroskopische Strukturuntersuchung von Gläsern des Systems Fe₂O₃-V₂O₅

Zusammenfassung Die Struktur von Gläsern des Systems Fe₂O₃-V₂O₅ in dem Bereich von 0–50 Molprozent Fe₂O₃ wurde mit Hilfe der IR-Spektroskopie untersucht. Zusatz von Fe₂O₃ begünstigt die Umwandlung der VO₅- in VO₄-Gruppen. Das kann in den IR-Spektren durch zwei Banden bei 1020 und 930 cm^–1 festgestellt werden. Die erste wird durch Schwingungen der kurzen V=O-Nichtbrücken-bindungen in den VO₅-Gruppen verursacht, die zweite wird auf Schwingungen der V—O-Bindungen in dem deformierten VO₄-Tetraeder zurückgeführt.

     

Hydrogen-Related Paramagnetic Centers in Ge-Doped Sol-Gel Silica Induced by γ-Ray Irradiation

We have studied the generation mechanisms of H(II) paramagnetic centers in Ge-doped silica by investigating up to 10⁴ mol ppm sol-gel Ge-doped silica materials. We have considered materials with the same concentrations of Ge but that are produced by two different densification routes that give rise to different concentrations of Ge-related oxygen deficient centers (GeODC(II)). These centers are characterized by an optical absorption band at ∼5.2 eV (B_2β band) and two related emissions at ∼3.2 eV and ∼4.3 eV. The GeODC(II) content was estimated by absorption and emission measurements. The H(II) centers were induced by room temperature γ-ray irradiation and their concentration was determined by electron paramagnetic resonance measurements. The comparison between the two kinds of materials, obtained by different preparations, shows that the GeODC(II) concentration increases with the Ge content and is enhanced by vacuum densification. The comparison of irradiated samples shows that beyond the already known process of conversion of preexisting GeODC(II) into H(II) centers, another generation process of H(II) centers is effective that involves irradiation induced GeODC(II).