Electrophilic addition of lead tetraacetate to 2-carene in an acidic medium

Oxidation of 2-carene by lead tetraacetate in acetic acid afforded p-menth-1(10),2-dien-7-ol, 2-acetyl-6,6-dimethylbicyclo[3.1.0]hexane, p-menth-2-ene-1,7-diol, p-menth-1-ene-3,7-diol, and 2-(m-tolyl)propanol-2.Deceased.A. M. Butlerov Scientific Research Chemical Institute, V. I. Ul'yanov-Lenin Kazan' State University, 420008 Kazan. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 1, pp. 147–150, January, 1992.     

Transannular reactions of two parallel 1,3-butadiynes: syntheses,structures, and reactions of 1-azacyclotetradeca-3,5,10,12-tetrayne derivatives

The synthesis of 1-alkyl and 1-aryl-1-azacyclotetradeca-3,5,10,12-tetraynes was achieved in a stepwise approach. The key intermediate was 1,13-dibromotrideca-2,4,9,11-tetrayne (18). Reaction with methyl- (19 a), ethyl- (19 b), isopropyl- (19 c), n-butyl- (19 d), and tert-butylamine (19 e) as well as aniline (19 f) and p-methoxyaniline (19 g) gave the corresponding 14-membered tetraynes 20 a-20 g. The ring inversion process of 20 b was studied by variable temperature (1)H NMR spectroscopy. From these measurements a value of 10.6 kcal mol(-1) was calculated for DeltaG(not equal). X-ray investigations on single crystals of 20 b, 20 c, and 20 f revealed the axial position for the substituent at each nitrogen atom. For 20 b we encountered the chair conformation, for 20 c both chair and boat conformations, and for 20 f the boat conformation in the solid state. The reaction of 20 c with concentrated HCl in ethanol yielded 2,10-dichloro-6-isopropyl-6-azatricyclo[9.3.0.0(4,8)]tetradeca-1(11),2,4(8),9-tetraene (25 c). Compound 25 c was oxidized by 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) to 27 c. The structure of the latter was confirmed by X-ray investigations. The reaction of 20 c in aqueous HCl lead to the formation of 10-chloro-2-isopropyl-1,3,4,6,7,8-hexahydro-2H-benzo[g]isoquinolin-9-one (37 c). The structure of 37 c was verified by X-ray studies on single crystals.     

Biginelli reaction in aqueous medium: a greener and sustainable approach to substituted 3,4-dihydropyrimidin-2(1H)-ones

An environmentally benign aqueous Biginelli protocol for the synthesis of substituted 3,4-dihydropyrimidin-2(1H)-ones using polystyrenesulfonic acid (PSSA) as a catalyst has been achieved. These microwave-assisted reactions proceed efficiently in water in the absence of organic solvent, with simple filtration as the product isolation step.     

Electric conductivity in a fibrous porous medium with thin but polarized double layers

The electric conduction in the fibrous medium constructed by a homogeneous array of parallel, identical, charged, circular cylinders having an arbitrary zeta potential filled with the solution of a symmetrically charged electrolyte is analytically examined. The thickness of the electric double layers surrounding the dielectric cylinders is assumed to be small relative to the radius of each cylinder and to the gap width between two neighboring cylinders, but the polarization of the mobile ions in the diffuse layers is allowed. The effect of interactions among individual cylinders is taken into explicit account by employing a unit cell model. The appropriate equations of conservation of electrochemical potential energies of ionic species are solved for each cell, in which a cylinder is envisaged to be surrounded by a coaxial cylindrical shell of the fluid solution. Analytical expressions for the effective electric conductivity are obtained in closed forms as functions of the porosity of the fiber matrix and other characteristics of the porous system. Comparisons of the results of the cell model with different conditions at the outer boundary of the cell are made. Under an otherwise identical condition, the electric conductivity in a porous medium composed of an array of parallel cylinders in the transverse direction is smaller than that of a suspension of spheres. The effect of interactions among the cylinders or spheres on the effective conductivity can be quite significant under appropriate conditions.     

Flexible matching of test ligands to a 3D pharmacophore using a molecular superposition force field: Comparison of predicted and experimental conformations of inhibitors of three enzymes

Summary A computer procedure TFIT, which uses a molecular superposition force field to flexibly match test compounds to a 3D pharmacophore, was evaluated to find out whether it could reliably predict the bioactive conformations of flexible ligands. The program superposition force field optimizes the overlap of those atoms of the test ligand and template that are of similar chemical type, by applying an attractive force between atoms of the test ligand and template which are close together and of similar type (hydrogen bonding, charge, hydrophobicity). A procedure involving Monte Carlo torsion perturbations, followed by torsional energy minimization, is used to find conformations of the test ligand which cominimize the internal energy of the ligand and the superposition energy of ligand and template. The procedure was tested by applying it to a series of flexible ligands for which the bioactive conformation was known experimentally. The 15 molecules tested were inhibitors of thermolysin, HIV-1 protease or endothiapepsin for which X-ray structures of the bioactive conformation were available. For each enzyme, one of the molecules served as a template and the others, after being conformationally randomized, were fitted. The fitted conformation was then compared to the known binding geometry. The matching procedure was successful in predicting the bioactive conformations of many of the structures tested. Significant deviation from experimental results was found only for parts of molecules where it was readily apparent that the template did not contain sufficient information to accurately determine the bioactive conformation.     

On guaranteed stability of uncertain linear systems via linear control

This paper addresses the problem of stabilizing an uncertain linear system. The uncertaintyq(·) which enters the dynamics is nonstistical in nature. That is, noa priori statistics forq(·) are assumed; only boundsQ on the admissible variations ofq(·) are taken as given. The results given here applied to so-called matched systems differ from previous results in two ways. Firstly, the stabilizing control in this paper is linear; for this same class of problems, many of the existing results would require a nonlinear control. Furthermore, those results which do in fact yield linear controls are only valid when a certain matrix (q) (formed using the given data) is negative definite for allq Q. In contrast, the theory given here only requires compactness of the bounding setQ. Secondly, we show that the so-called matching conditions (used in earlier work) can be generalized so as to encompass a larger class of dynamical systems.This research was supported by the US Department of Energy under Contract No. ET-78-S-01-3390.     

New amides fromSpilanthes oleracea

In addition to the well known affinin [=spilanthol, (2E,6Z,8E)-deca-2,6,8-trienoic acid isobutylamide (1)], the corresponding 2-methyl-butylamide (2), and two new acetylenic alkamides were isolated fromSpilanthes oleracea L. by reversed phase medium pressure chromatography: (Z)-non-2-en-6,8-diynoic acid isobutylamide (3) and (Z)-dec-2-en-6,8-diynoic acid isobutylamide (4). The structures and their stereochemistries were elucidated by¹H-NMR,¹³C-NMR (2 and3), MS, UV, IR, and CD (2). The chemotaxonomic significance of the distribution of alkamides within theCompositae tribeHeliantheae is briefly discussed.

---

Neue Amide ausSpilanthes oleracea (Kurze Mitteilung)

Zusammenfassung AusSpilanthes oleracea wurden neben dem seit langem bekannten Affinin [=Spilanthol, (2E,6Z,8E)-Deca-2,6,8-triensäureisobutylamid (1)] durch Umkehrphasen-Mitteldruckchromatographie das entsprechende 2-Methylbutylamid (2) und zwei neue acetylenische Alkamide isoliert: (Z)-Non-2-en-6,8-diinsäure-isobutylamid (3) und (Z)-Dec-2-en-6,8-diinsäure-isobutylamid (4). Die Strukturen und deren Stereochemie wurden mittels¹H-NMR,¹³C-NMR (2 und3), MS, UV, IR und CD (2) aufgeklärt. Die chemotaxonomische Bedeutung der Verbreitung von Alkamiden innerhalb der Compositen-TribusHeliantheae wird kurz diskutiert.

     

SnCl2-mediated carbonyl allylation in fully aqueous media

Systematic studies were performed on SnCl₂-mediated carbonyl allylation reaction between aldehydes and allyl halides in fully aqueous media. Totally three valuable reaction systems were discovered, which were SnCl₂/CuCl₂, SnCl₂/TiCl₃, and SnCl₂/PdCl₂. They all provided good to excellent yields in the allylation of aliphatic and aromatic aldehydes under very mild and convenient conditions. SnCl₂, by itself, was also found to be effective for the allylation reaction when allyl bromide was employed. However, the SnCl₂-only reaction could only tolerate very small amount of water as the solvent. The SnCl₂/CuCl₂, SnCl₂/TiCl₃, and SnCl₂/PdCl₂-mediated reactions exhibited good regioselectivity favoring the γ-adduct when cinnamyl halides were employed as the allylation reagent. The same reactions with cinnamyl halides also showed good diastereoselectivity favoring the anti-product. Mechanistic studies using proton NMR techniques suggested that the additive (i.e., CuCl₂, TiCl₃, PdCl₂) could accelerate the formation of allyltin intermediate, but this step was shown not to be the most important for the allylation. Thus we proposed that the Lewis acid catalysis effect exerted by the additive was the main reason for the observed reactivity enhancement.     

Kinetic parameters of the In(III)/In(I) electrode reaction in bromide medium

The electrode kinetic parameters of the In(III)/In(I) couple in acidic 4M bromide solution have been determined by means of the rotating disc electrode technique.

---

Die elektrochemisch-kinetischen Parameter des In(III)/In(I)-Redoxsystems in Bromidlösung (Kurze Mitteilung)

Zusammenfassung Die elektrochemisch-kinetischen Parameter am In(III)/In(I)-Redoxsystem wurden in saurer 4-M-Bromidlösung mittels der rotierenden Scheibenelektrode bestimmt.

     

Direct spectrophotometric method for the determination of cobalt with indane 1,2,3-trionetrioxime in aqueous medium

A simple, sensitive and selective Spectrophotometric method has been developed for the determination of cobalt using indane 1,2,3-trionetrioxime (ITT): The method is based on the colour reaction between ITT and cobalt(II) in sodium acetate-acetic acid buffer (pH 4.5–7.5) medium. The calibration graph for measurement at 320 nm is linear in the range 1.18–23.60g of cobalt per 25 ml, with molar absorptivity of 5.32×10⁴1mol^–1 cm^–1. The effect of interfering ions has been studied and the method was applied to the determination of cobalt in alloys, with good results.