一种变压器巴伦馈电的超短波紧耦合阵列天线

紧耦合阵列天线(Tightly Coupled Array, TCA)具有超宽带、低剖面、宽角扫描等特点,近年来受到国内外学者的广泛关注。然而,在甚高频(VHF)、特高频(UHF)频段TCA 由于馈电网络设计困难等原因现有的研究报道很少。为了填补这一空白,本文设计并测试了一款变压器巴伦馈电的TCA,利用变压器巴伦解决了单元平衡馈电困难问题,同时采用短路枝节抑制E面共模谐振,采用频率选择表面(FSS)匹配层改善宽角扫描阻抗匹配。实测结果表明,该天线在110~520 MHz 频带内、±40°扫描角范围内电压驻波比<2.5,和仿真结果吻合。     

Transformer-based global–local feature learning model for occluded person re-identification

Most recent occluded person re-identification (re-ID) methods usually learn global features directly from pedestrian images, or use additional pose estimation and semantic analysis model to learn local features, while ignoring the relationship between global and local features, thus incorrectly retrieving different pedestrians with similar attributes as the same pedestrian. Moreover, learning local features using auxiliary models brings additional computational cost. In this work, we propose a Transformer-based dual-branch feature learning model for occluded person re-ID. Firstly, we propose a global–local feature interaction module to learn the relationship between global and local features, thus enhancing the richness of information in pedestrian features. Secondly, we randomly erase local areas in the input image to simulate the real occlusion situation, thereby improving the model’s adaptability to the occlusion scene. Finally, a spilt group module is introduced to explore the local distinguishing features of pedestrian. Numerous experiments validate the effectiveness of our proposed method.     

基于改进麻雀搜索算法优化BN的变压器故障诊断研究

针对变压器故障诊断准确率低和稳定性差的问题,文中提出了一种改进麻雀搜索算法优化贝叶斯网络的变压器故障诊断方法。首先,通过计算互信息建立最大支撑树并进行定向处理得到贝叶斯网络初始结构即初始种群。然后,在算法中引入一种新的合作机制和正弦余弦算法,提高算法收敛速度和全局搜索能力,并利用油中溶解气体分析,创建基于改进麻雀搜索算法优化贝叶斯网络的变压器故障诊断模型。最后,为了证明所提方法的优越性,将所提的方法与现有变压器故障诊断方法进行对比。结果表明,文中所提出的方法故障诊断率最高,可以更精准地对变压器进行故障诊断。     

一种宽带注入锁定三倍频器

文章提出了一种宽带注入锁定三倍频器。在传统注入方式基础上,倍频器采用了推-推差分对输入信号进行二倍频,并将产生的二次谐波通过变压器耦合至注入管的源极共模点,增强了注入管源极共模点二次谐波。由于注入电流是由注入信号与源极共模点二次谐波进行混频而产生,因此注入电流也被增强,从而增大了锁定范围。除此之外,三倍频采用了四阶谐振器,谐振阻抗的相位在过零点被平坦化,锁定范围进一步被增大。采用标准CMOS 65 nm工艺设计三倍频,芯片面积为720×670 μm²,1.2-V供电时的功耗为15.2 mW。0 dBm注入功率下三倍频的锁定范围为19.2~27.6 GHz,对应的基波抑制比大于25 dB,二次谐波抑制大于35 dB。注入锁定三倍频器可满足5G收发机中本振源的要求。     

Multiple Bonds between Transition Metals and “Bare” Main Group Elements: Links between Inorganic Solid State Chemistry and Organometallic Chemistry

The last two decades have seen a dramatic development in the study of metal-metal multiple bonds, particular successes being recorded in the field of organometallic chemistry. Syntheses designed to produce novel transition metal complexes with single, double, triple and quadruple metal-metal bonds occupy a most important place in such research, as also do reactivity studies. A striving to establish general principles has provided much of the motivation for such work, but one less obvious goal—the commercial application of the catalytic properties of metal-metal multiple bonding systems, in the medium and long term—should not be overlooked. All aspects of the investigations of metal-metal multiple bonds also apply to a particular class of compound that has, however, enjoyed little lime-light and thus deserves the present review: complexes with multiple bonds between transition metals and substituent-free (“bare”) main group elements. Although based mostly on accidental discoveries, the few noteworthy examples are now beginning to unfold general concepts of synthesis that are capable of being extended and thus are deserving of exploitation in preparative chemistry. The availability of further structural patterns exhibiting multiple bonds between transition metals and ligand-free main group elements might enable preparative organometallic chemistry to expand in a completely new direction (for instance by the stabilizing or activation of small molecules at the metal complex). This essay discusses the chemistry of complexes of bare carbon, nitrogen, and oxygen ligands (carbido-, nitrido-, and oxo-complexes) and their relationships to higher homologues from both a synthetic and a structural point of view.     

Graded PZT ceramics for piezoelectric transformers

In the present study two types of the synthesized Pb(Zr_1−xTi_x)O₃ (PZT) powders differing in Zr/Ti ratio were used to prepare the spatially inhomogeneous (i.e., graded) structure. A position-dependent chemical composition was expected to cause the property gradient. Disk-shaped compacts were prepared in a way such that two different orientations of the radial gradients were formed. The solid state sintering under pressure was utilized to prepare ceramics. Simultaneous thermal analysis was used to study thermal behavior of the ceramic powders. Graded PZT ceramics were characterized using X-ray diffraction, scanning electron microscopy and energy dispersive spectroscopy. It was also characterized in terms of its dielectric properties by both bridge technique and the impedance spectroscopy. On the basis of graded PZT ceramics the disk-shaped radial mode piezoelectric transformer was developed and fabricated.     

DYNAMIC PROPERTIES OF MAIN SOUNDER IN BLACK CICADA (C. atrata Fabricius)~*

In this paper, the dynamic properties of the main sounder (the sounding muscle (SMc) and the sounding membrane (SM)) and the generating mechanism of amplitude-modulation pulse train (AMPT) are given. The acting process of SMc is a quasi-simple harmonic contraction vibration. The amplitudes of soundless and sounding contracting motion are about 17.2 /μm and 29.4/μm, respectively, and the efficiency of dynamic sounding is about 17％, The unsounded motion of SM is a quasi-simple harmonic vibration, and the amplitude is about 7.81/μm. The sounding motion of SM is a complex vibration, and the amplitude is about 12.66 μm. In each syllable of the song, AMPT_(1,2,3) are separately produced by driving vibrations (V_1,2,3)) of three long ribs in the upper half of SM, and the peaks of V_(1,2,3) lead the first pulse of high amplitude in AMPT_(1,2,3) by 0.156 ms, respectively. The membrane structure in the lower half of SM is mainly to transmit contracting movement of SMc.     

用气相色谱仪测定变压器油中气体

本文采用多柱自动切换气相色谱仪和真空全脱气装置对变压器和互感器用油中的气体进行了系统的分析，除可测定油中的氢、甲烷、乙炔、乙烯、乙烷、二氧化碳和一氧化碳等气体外，还可根据不同需要测定氮、氧以及Ｃ３和Ｃ４烃的含量。本方法已用于诊断变压器和互感器内部变化及故障。     

Determination of three compounds in Aloe vera by capillary electrophoresis

A capillary electrophoretic assay for determining aloe-emodin (AE), methyl p-coumarate (MC), and 3,4-dihydro-6,8-dihydroxyl-[(3s)-2'-acetyl-3'-hydroxyl-5'-methoxy-benzyl]-isocoumarin (DDI) in Aloe vera has been developed. Baseline separation was achieved within 15 min using a running buffer of 20 mm borax containing 10% (v/v) acetonitrile at pH 10.5. A linear relationship between the peak area and the concentration of the analytes was found in the ranges 5-500, 10-1000 and 2-1000 micro g/mL for AE, MC and DDI, respectively, with correlation coefficients of 0.9992-0.9998. The relative standard deviations of migration time and peak area were within 0.17-0.19 and 1.52-3.37%, respectively. The recoveries of AE, MC and DDI were 105, 102 and 96.4%. The contents of AE, MC and DDI in Aloe vera were measured to be 5.13, 0.768 and 1.30 mg/g, respectively.     

分光光度法测定微量炔烃的研究

叙述了利用生成炔亚铜的反应来定量测定微量炔烃的分光光度法。研究表明，在严格控制氨的浓度、保持足量的还原剂的条件下，可以有效地消除反应介质、反应时间、反应物的浓度、空气中的氧等对测定的影响，获得满意的定量结果。该方法已在实际生产中得到应用。