电子束、离子辅助和离子束溅射三种工艺对光学薄膜性能的影响

运用电子束、离子辅助和离子束溅射三种镀膜工艺分别制备光学薄膜,包括单层氧化物薄膜和增透膜,然后采取一系列测试手段,如Zygo轮廓仪、原子力显微镜、表面热透镜技术和X射线衍射等技术,来分析和研究不同的工艺对这些薄膜性能的不同影响,以判断合理的沉积工艺。     

Novel Protonic Conductive Silicates Produced by the Sol-Gel Method

ABSTRACT

Materials which display ionic conductivity were produced by the sol-gel and microemulsion-gel methods. The charging and discharging characteristics were investigated and it was found that a single ionic species was responsible for the conduction, the ionic species being residual protons from the initial component mixture. The complex impedence of various samples was measured and the ionic conductivities ranged in value from 9 × 10^?8 to 1 × 10^?5 ohm^?1 cm^?1. An Arrhemius plot for a microemulsion-gel revealed that the energy of activation was 0.15 eV.     

Flexible electronics: Prediction of substrate deformation during different steps of the lithography process

A numerical model was developed to simulate the micro-deformations of a polymeric substrate due to lithographic processing of different layers of a transistor-like structure. The results of the model were validated with the results from experiments. The model, a mechanical-thermal-hygroscopic model, takes into account the dimensional effects of temperature, moisture and stresses. It also includes the temperature dependent visco-elastic behaviour of the polymer substrate. The model can be used to predict overlay accuracies between different functional layers introduced by the lithographic process. It can also be used to understand the underlying processes such that it provides a tool to improve the overlay accuracy during actual processing.     

Influence of the e-beam irradiation and photo-oxidation aging on the structure and properties of LDPE-OMMT nanocomposite films

In this paper two systems, polyethylene (LDPE) and polyethylene/commercial organo-modified montmorillonite (LDPE/OMMT) nanocomposite, were subjected to e-beam irradiation at different doses and both the molecular modifications and mechanical properties have been investigated through solubility, FT-IR, calorimetric and tensile tests. Moreover, in some of the irradiated systems photo-oxidation aging was performed and its effects were studied. The results show an enhancement with irradiation of the positive effect of the nano-filler loading, related to the increase of the mechanical properties, due to the increase of the nano-filler polymer interaction.Nevertheless calorimetric and FT-IR data indicate that the well known reduction of LDPE/OMMT nanocomposite resistance to photo-oxidation ageing, with respect to LDPE, is amplified by ionizing radiation.     

TiO2多孔膜上水热合成ZnO结构及其光电性能

The synthesis of ZnO architecture on a fluorine-doped SnO_2(FTO) conducting glass pre-coated with nanoporous TiO_2 film has been achieved by a one-step hydrothermal method at a temperature of 70℃.The effect of the reaction time on the morphology of the ZnO architecture has been investigated,and a possible growth mechanism for the formation of the ZnO architecture is discussed in detail.The morphology and phase structures of the as-obtained composite films have been investigated by field-emission scanning...     

脉冲镀金在半导体激光器中的应用及工艺优化

为提高半导体激光器芯片的焊接成功率以及器件的性能寿命,采用脉冲电镀技术在半导体激光器芯片 P 面沉积了厚金层,详细研究了镀金液 pH 值和电流通断比对镀金层组织形貌、表面粗糙度、内应力、沉积均匀性以及粘附力的影响规律。结果表明,表面粗糙度随 pH 值的升高或通断比的提高而增大。沉积均匀性随 pH 的增大先降低后升高,而随通断比的增大而变差。pH 较大（＞10．0）或较小（＜8．5）时,镀金层粘附性均不理想。而通断比对镀金层的粘附性影响不大。不同条件下,金膜内应力均为张应力,大小为29～88 MPa。     

Use of Mercury Film Glassy Carbon Electrode Modified with Multiwalled Carbon Nanotubes in Electrochemical Analysis of DNA

Mercury film plated on a glassy carbon electrode modified with multiwalled carbon nanotubes (MF/MWNTs/GCE) was used for the analysis of single (ss) and double stranded (ds) DNA, as well as for Jurkat genomic DNAs methylated to different degrees. The results indicated that the DNA molecules adsorbed quite strongly on the MF/MWNTs/GCE surface allowing ex situ adsorption and produce well developed peaks (due to cytosine and adenine) by using adsorptive stripping (Ads, ex situ) square wave voltammetry (SWV). Also, SWV of Jurkat DNA mixtures methylated to different degrees revealed a linear decrease of the peak height with increasing methylation indicating an increase of structural rigidity.     

Study of the effect of laser treatment on the initial oxidation behaviour of Al‐coated NiCrAlY bond‐coat

In this study, the initial oxidation behaviour of laser‐treated Al/NiCrAlY bond‐coat is investigated. Two approaches, (i) Al film sputtering on the surface of bond‐coat and (ii) laser treatment, have been taken to enhance the oxidation resistance of NiCrAlY bond‐coat. Experimental results showed that after laser treatment, the Al/NiCrAlY bond‐coat exhibited a columnar dendritic microstructure without cracks and voids. A dense and continuous α‐Al₂O₃/Cr₂O₃ multilayer was found to form on the bond‐coat surface. Results on the cyclic oxidation at 1200 °C (for time ≤ 204 h) revealed that the laser‐treated Al/NiCrAlY bond‐coat exhibited better oxidation resistance compared to as‐sprayed NiCrAlY, Al/NiCrAlY and laser‐remelted NiCrAlY bond‐coat. The formation of θ‐Al₂O₃, NiO, Cr₂O₃ and NiCr₂O₄ spinel oxides was observed to be suppressed due to the preformed α‐Al₂O₃ scale during initial oxidation on the surface of laser pre‐oxidized Al/NiCrAlY bond‐coat. Copyright © 2013 John Wiley & Sons, Ltd.     

Preparation and Characterization of Styrene/Butyl Acrylate Emulsifier-Free Latex with 2-Acrylamido-2-Methyl Propane Sulfonic Acid as a Reactive Emulsifier

A kind of emulsifier-free latex (FL) was successfully synthesized from styrene (St) and butyl acrylate (BA) with 2-acrylamido-2-methyl propane sulfonic acid (AMPS) as a reactive emulsifier. The particle size of latex particles, stability against electrolytes, minimum film forming temperature (MFT) and water contact angle (CA) were evaluated and compared with a conventional latex (CL). Test results show that FL has larger particle size, better stability against electrolytes and lower MFT value compared with CL; higher AMPS content leads to smaller particle size and smaller water CA.     

Microstructure,Tribological Behavior,and Corrosion-Resistant Performance of Bonded MoS2 Solid Lubricating Film Filled with Nano-LaF3

The anti-friction and wear-resistant performances of bonded MoS₂ solid lubricating films filled with nano-LaF₃ filler were investigated under in drying wear conditions, the corrosion-resistant performances of bonded lubricating films was evaluated according to ASTM-B117, and the characteristics of the bonded lubricating films were examined by TEM and elemental x-ray map. The wear-resistant performance of the bonded lubricating films filled with nano-LaF₃ filler increases with increasing content of nano-LaF₃ filler within a content range between 0 and 5 wt%, whereas the bonded lubricating films filled with 0.5–1 wt% micro-LaF₃ filler exhibit the better wear-resistant performances. The incorporation of both nano-LaF₃ and micro-LaF₃ filler leads the increase of the coefficient of friction of the bonded lubricating films. The LaF₃ filler can improve the corrosion-resistant performance of the bonded MoS₂ solid lubricating films, whereas the incorporation of nano-LaF₃ filler is more effective to improve the corrosion-resistant performance of the bonded lubricating films than micro-LaF₃ filler. The improvement in the wear-resistant and corrosion-resistant performances of the bonded lubricating films by the incorporation of the nano-LaF₃ filler is attributed to the strengthened interfacial bonding among the nano-LaF₃ and the MoS₂ lubricant and the polymeric matrix. However, a too high mass fraction of the nano-LaF₃ filler in the bonded lubricating films will increase surface and interface defects, and lead the worsening of corrosion-resistant performance of the bonded lubricating films.