影响DPF焦点装置中子稳定性的因素和改进措施

简要叙述了稠密等离子体聚焦装置作为中子发生器的工作原理，对影响稠密等离子体聚焦装置放电出中子产额及其稳定性的一些因素和改进措施进行了简单讨论．通过使用不同电极形状的场畸变开关很好地提高了焦点装置的运行，使装置输出中子的起伏得到明显的改善．通过对腔内电极的清洁，在不更换气体的条件下，聚焦装置放电出中子产额稳定.The principle of dense plasma focus(DPF) as neutron generator has been investigated in this paper. We have stated briefly some factors that mainly influnce the DPF s neutron yield and some methods improving the stability of neutron yields on the dense plasma focus. It is showed that the fluctuation of DPF output neutron becomes smaller by using different types of field-distortion elements. Over 100 consecutive shots without purging the test gas the neutron yields has no obvious change.     

A new fluorescent chemosensor for transition metal cations and on/off molecular switch controlled by pH

A new fluorescent chemosensor with imidazole as ionophore was synthesized by the selective derivation of calixarene, which can effectively recognize Cu²⁺ and Zn²⁺ leading to different fluoroscopic behaviors in CH₃OH-H₂O. This system could be considered as a molecular switch. By modulating the pH of the solution, on-off-on fluorescent switching is carried out upon combinatory addition of acid, base and Cu²⁺.     

毛细管放电X光激光装置中的预脉冲电源

 针对目前毛细管放电X 光激光装置产生的预脉冲电流幅值过大、持续时间较短的问题，提出了增加预脉冲开关抑制原有预脉冲，再外加由脉冲成形网络组成的预脉冲发生器，产生所需预脉冲的改造方案。可在主脉冲来临之前产生幅度10~50A，持续时间约17μs的方波预脉冲电流，来满足毛细管放电泵浦类氖氩X光激光实验的需要。     

白炽灯延寿节电开关

运用交流电路中线圈的自感特性，制成一种白炽灯的延寿节电开关，它可消除白炽灯起动瞬间的浪涌电流，延长白炽灯寿命，节约用电。     

PHS数据通信技术的发展及业务运营探讨

文章概述了个人手持电话系统(PHS)的发展过程,对其最新技术进行了介绍,并在对PHS数据通信业务的发展及运营策略进行深入分析和探讨的基础上,展望了该业务的应用前景.     

光突发交换中的冲突解决协议

文章介绍了适合于在当前技术条件下的新交换技术-光突发交换，并对光突发交换中的各种冲突解决协议进行了阐述和对比．     

在道岔缺口超标报警系统中的软件设计

介绍了SED1335的性能及特点，重点阐述了它在道岔缺口超标报警系统中显示字符、汉字、构建友好界面的软件设计方法，提出了编写液晶显示程序的一些优良算法。     

Survey of switching techniques in high-speed networks and their performance

One of the most promising approaches for high speed networks for integrated service applications is fast packet switching, or ATM (asynchronous transfer mode). ATM can be characterized by very high speed transmission links and simple, hard-wired protocols within a network. To match the transmission speed of the network links, and to minimize the overhead due to the processing of network protocols, the switching of cells is done in hardware switching fabrics in ATM networks. A number of designs have been proposed for implementing ATM switches. Although many differences exist among the proposals, the vast majority of them are based on self-routeing multistage interconnection networks. This is because of the desirable features of multi-stage interconnection networks such as self-routeing capability and suitability for VLSI implementation. Existing ATM switch architectures can be classified into two major classes: blocking switches, where blockings of cells may occur within a switch when more than one cell contends for the same internal link, and non-blocking switches, where no internal blocking occurs. A large number of techniques have also been proposed to improve the performance of blocking and non-blocking switches. In this paper, we present an extensive survey of the existing proposals for ATM switch architectures, focusing on their performance issues.     

A high-capacity broadband packet switch architecture based on a multilink approach

Broadband packet networks based on asynchronous transfer mode (ATM) are expected to provide a wide range of services, including motion video, voice, data and image. When these networks become prevalent, some applications such as motion video and high-speed LAN interconnections will place a very large bit rate requirement on the channels. Currently, the physical layer supported by the synchronous optical network (SONET) allows the transmission of up to 2.4 Gbit/s with the OC-48 optical interface. However, it is not feasible for the electronic packet switch to route packets at this rate on a single link. In this paper we present a design of a broadband packet switch that uses multiple links in parallel to realize a high-speed channel. This implementation permits the switch to operate at the lower link rate, which can be at 150 Mbit/s, while having the ability to support a virtual circuit at a higher rate (up to 2.4 Gbit/s). The main contribution of the design is that packet sequence on a channel is still maintained even though packets are allowed to use any of the links belonging to the same channel. Besides allowing the switch to function at a slower rate than the transmission channel rate, the implementation of the multilinks benefits from statistical multiplexing gain. Analytical results show the performance advantages of multilink design with respect to delay, throughput and packet loss probability.     

Cr^4＋：YAG可饱和吸收特性测量

测量了Cr4+:YAG材料的可饱和吸收特性,用多种数据分析方法处理了实验结果,Cr4+:YAG的基态吸收截面σgs=11×10-19cm2,激发态吸收截面σes=1.2×10-19cm2。