Sample-path optimization of convex stochastic performance functions

In this paper we propose a method for optimizing convex performance functions in stochastic systems. These functions can include expected performance in static systems and steady-state performance in discrete-event dynamic systems; they may be nonsmooth. The method is closely related to retrospective simulation optimization; it appears to overcome some limitations of stochastic approximation, which is often applied to such problems. We explain the method and give computational results for two classes of problems: tandem production lines with up to 50 machines, and stochastic PERT (Program Evaluation and Review Technique) problems with up to 70 nodes and 110 arcs. Sponsored by the National Science Foundation under grant number CCR-9109345, by the Air Force Systems Command, USAF, under grant numbers F49620-93-1-0068 and F49620-95-1-0222, by the U.S. Army Research Office under grant number DAAL03-92-G-0408, and by the U.S. Army Space and Strategic Defense Command under contract number DASG60-91-C-0144. The U.S. Government has certain rights in this material, and is authorized to reproduce and distribute reprints for Governmental purposes notwithstanding any copyright notation thereon. Sponsored by a Wisconsin/Hilldale Research Award, by the U.S. Army Space and Strategic Defense Command under contract number DASG60-91-C-0144, and the Air Force Systems Command, USAF, under grant number F49620-93-1-0068. Sponsored by the National Science Foundation under grant number DDM-9201813.     

A copper/polyimide Metal-base packaging technology

A unique substrate MCPM (Mitsubishi Copper Polyimide Metal-base) technology has been developed by applying our basic copper/polyimide technology.¹ This new substrate technology MCPM is suited for a high-density, multi-layer, multi-chip, high-power module/package, such as used for a computer. The new MCPM was processed using a copper metal base (110 × 110 mm), full copper system (all layers) with 50-μm fine lines. As for pad metallizations for the IC assembly, we evaluated both Ni/Au for chip and wire ICs and solder for TAB ICs. The total number of assembled ICs is 25. To improve the thermal dispersion, copper thermal vias are simultaneously formed by electro-plating. This thermal via is located between the IC chip and copper metal base, and promotes heat dispersion. We employed one large thermal via (4.5 mm^?) and four small vias (1.0 mm^?) for each IC pad. The effect of thermal vias and/or base metal is simulated by a computer analysis and compared with an alumina base substrate. The results show that the thermal vias are effective at lowering the temperature difference between the IC and base substrate, and also lowering the temperature rise of the IC chip. We also evaluated the substrate’s reliability by adhesion test, pressure cooker test, etc.     

高效液相色谱法测定精对苯二甲酸中微量杂质

建立了高效液相色谱法（HPLC）同时测定精对-苯二甲酸（PTA）中微量杂质4-羧基苯甲醛（4-CBA）、对-甲基苯甲酸（P-TOL）和苯甲酸（C7H6O2）含量的方法。采用的色谱柱为Shim-PackWAX-1柱，流动相为0.1mol/L NH3H2PO4 6%CH3OH，(pH4.5)，检测波长为254nm。PTA中微量杂质4-CBA、P-TOL和C7H6O2的含量分别为0.59-235.20mg/kg、4.52-392.00mg/kg和0.28-24.55mg/kg时线性关系良好，其线性相关系数分别为0.9998、0.9997和0.9999。苯甲酸加样平均回收率99.03％，RSD0.37％。     

高效液相色谱法测定细胞分裂素的方法研究

利用高效液相色谱法测定水稻愈伤组织和微生物发酵产品中的玉米素，二氢玉米素，核糖基玉米素和核糖基二氢玉米素。样品用抽提液抽提，经Ｂｉｏ－Ｒｅｘ７０弱阳离子交换柱和ＸＡＤ－７／Ｓｅｐ－ｐａｋＣ１８复合柱净化和富集后，直接用ＨＰＬＣ分析，方法回收率达９４％～８４％，相对标准偏差小于３．３％。最低检测限达２．０ｎｇ。     

Fe-Ni-B-O纳米合金的合成及其催化制氢性能的研究

Preparation and catalytic performance of Fe-Ni-B-O nano-alloy having crystal-palpus structure has been studied. Black powder was synthesized by reducing mixture solution of Fe²⁺, Ni²⁺ with KBH₄ as reducing agent and polyethylene glycol as dispersant. Fe-Ni-B-O nano-alloy of crystal-palpus structure was obtained after hydrogen reduction of black powder. TEM shows that crystal-palpus length is 200～400 nm, diameter is 2～4 nm. The analytic results indicate that the total content of Fe and Ni is 86.6%, B is 5.08%. The alloy exhibits excellent catalytic performance. Hydrogen generation rate can approach 100% especially when pH is 8.     

Facile cyclic ammonium salt with the smallest size for high performance electric double layer capacitors

A novel cyclic ammonium salt, N,N-dimethylpyrrolidinium tetrafluoroborate (P₁₁-BF₄), was successfully synthesized for the first time. The smallest cyclic structure of P₁₁-BF₄ induced high solubility and conductivity in PC, which can easier enter the micropores of activated carbon and occupy more surface area during charge/discharge process.     

人血清中地尔硫高效液相色谱法测定及药代动力学参数

建立了反相高效液相色谱法监测人口服地尔硫艹卓缓释片后血药浓度。血样用正己烷－氯仿－异丙醇混合溶剂（６０４０５）提取后，以Ｃ１８化学键合硅胶为固定相，甲醇－水－三乙胺为流动相，安定为内标，在２３９ｎｍ波长处定量检测。血药浓度在１５～３００μｇ／Ｌ范围内线性关系良好，最低检测浓度为３μｇ／Ｌ。批内（ｎ＝７）及批间（ｎ＝５）测定相对标准偏差分别小于６．８％和８．４％，回收率为９１％～１０４％。监测了８名健康人口服盐酸地尔硫艹卓缓释片后的不同时间的血药浓度变化，计算了有关的药代动力学参数。     

反相高效液相色谱法的多波长同时测定预混合饲料中的脂溶性维生素A，α－E，D_3，K_3

反相高效液相色谱法的多波长同时测定预混合饲料中的脂溶性维生素Ａ，α－Ｅ，Ｄ＿３，Ｋ＿３李桂凤，李缙扬，郝征红，聂燕，孟兆宏，李学春（山东省农业科学院中心实验室济南２５０１００）１前言对脂溶性维生素的分析，被许多国内外分析专家认为是高难度的分析项目。本...     

蒿甲醚在模拟体内酸碱环境中的代谢动力学研究

 利用高效液相法对蒿甲醚进行了模拟体内酸碱环境的代谢动力学研究 ,测定了蒿甲醚及其代谢产物双氢青蒿素、蒿甲醚呋喃酯的代谢曲线。结果表明 ,蒿甲醚在模拟体内肠道和血液的弱碱性环境条件下半衰期为2 87 2min(计算值 ) ;在模拟体内胃液的酸性环境条件下半衰期为 74 6min ;在两种条件下的主要代谢产物均为双氢青蒿素和蒿甲醚呋喃酯。该方法克服了以往文献所报道方法的一些缺点 ,不仅简化了样品制备方法 ,也提高了检测结果的准确性。