实现均匀照度光伏聚光镜设计

为满足聚光光伏系统的聚光需求,解决传统点聚焦式聚光光伏系统中聚焦光斑不均匀、径长比过大和聚光比较小的缺点,在不增加二次匀光器件的前提下,设计了径长比小、聚焦光斑相对均匀、聚光比高的聚光光伏系统。根据几何光学柯勒照明原理、等光程原理和反射定律,通过数值求解等光程方程组获得聚光镜各个面型的轮廓曲线。利用TracePro软件对所设计的聚光系统进行光线追迹模拟,结果表明:在聚光比为725的情况下,聚焦光斑最大照度仅为太阳照度的2300倍,是点聚焦情况下的1/10左右,系统的径长比为0.3,接收角为0.72°。系统设计实现了结构紧凑,聚光性能高的设计目标,为高倍聚光光伏系统的小型化,简单化提供了一种有效的解决途径。     

Proposition of a compensated pixelwise calibration for photonic infrared cameras and comparison to classic calibration procedures: Case of thermoelastic stress analysis

In this paper, we propose a compensated pixelwise calibration that integrates the effects of the camera housing temperature. The results of this calibration are compared on black body images to classic two points Non Uniformity Correction based calibrations, compensated or not. It is shown that the proposed approach leads to a significant improvement in the thermal resolution with a reduction in the mean error as well as the standard deviation. The approach is finally challenged on a real case measurement focusing on thermoelasticity. The gain in terms of accuracy measurement is highlighted by comparing the proposed calibration to classic calibrations and the scope of interest of this new calibration is discussed.     

Backlit Keyboard Inspection Using Machine Vision

A robust system for backlit keyboard inspection is revealed. The backlit keyboard not only has changeable diverse colors but also has the laser marking keys. The keys on the keyboard can be divided into regions of function keys, normal keys, and number keys. However, there might have some types of defects:incorrect illuminating area, non-uniform illumination of specified inspection region (IR), and incorrect luminance and intensity of individual key. Since the illumination features of backlit keyboard are too complex to inspect for human inspector in the production line, an auto-mated inspection system for the backlit keyboard is proposed in this paper. The system was designed into the operation module and inspection module. A set of image processing methods were developed for these defects inspection. Some experimental results demonstrate the robustness and effectiveness of the proposed system.     

包层折射率均匀调制LPFG光谱特性研究

介绍了光纤光栅发展的过程,阐述了光纤光栅的各种常用写制方法以及目前LPFG的发展现状,分析了耦合模理论;基于耦合模理论在纤芯折射率均匀调制的LPFG中的应用,利用Matlab软件对LPFG的光谱进行模拟,将耦合模理论进行修改,给出了单侧写制的LPFG的光谱图,提出了多侧写制LPFG的模型及曝光均匀度的概念。     

像增强器在高速图像采集中的应用分析

对以9350EOS-3-PRO三代像增强器和MC1362高速相机为平台搭建的高速采集系统进行了简单介绍,对可能影响像增强器工作的外部因素进行了实验分析。从电压和照度两个方面出发,通过实验采集数据并用MATLAB软件处理后得到结果。分析结果表明,当电压在2.98 V~4.22 V之间时,成像效果无明显变化,但在低照度环境下能显著提高成像效果,在高照度环境下工作容易饱和,有待进一步改善     

超高强度钢（35CrNi3Mo）化学成分标准物质研制

采用与超高强度钢,台炼过程相同的工艺制备了35CrNi3Mo化学成分标准物质。对标准物质的制备技术、均匀性检验、稳定性考察进行了分析。研制的35CrNi3Mo化学成分标准物质具有良好的均匀性和稳定性。采用8家实验室进行协作定值,对定值结果的不确定度进行评定,各组分定值结果的相对扩展不确定度小于13％。     

亮度优化立体视频视觉舒适度评价

结合立体视频帧左右视图的灰度图,采用鲁棒性算法与软剪刀算法相结合的"画笔"方案来提取立体视频帧的前景区域,合成视差图并提取水平视差,计算深度视差;根据主观评价结果建立视差深度-视觉舒适度模型,再结合亮度对视觉舒适度的评价模型进行优化,使模型的评分更接近人类视觉系统的评分;结合人类主观评价实验的结果,用逆向代入法求出模型的系数确定模型,最终实现基于人类视觉系统特性的对立体视频视觉舒适度的评价。实验结果表明:通过视觉舒适度模型计算得到的结果与人类主观评价结果之间的误差率不超过5%,其中大部分视频误差率不超过1%。说明评价模型更符合人类主观感知结果的立体视频视觉舒适度,模型评分更接近人类视觉系统特性的主观实验评分,这为立体视频舒适度的评价提供了参考。     

Experimental research of effects of different rotation radii on the growth rate of potassium dihydrogen phosphate crystals

Comparing with the traditional concentric rotation method (rotation radius is 0 cm), the effects of different rotation radii on the growth rate of KDP crystals were studied by experimental methods. It was found that with the increase of rotation radius from 0 cm, the growth rate of each direction of crystals first increased and then decreased in a size‐unchanged vessel. The smaller the distance between the crystal and vessel wall, the less the growth rate. This phenomenon was named the “wall collision effect”. Also, the value of growth rate reached a maximum when the rotation radius was about half of its allowable largest value in the size‐unchanged vessel. In addition, an increase of the rotation radius could improve the crystal growth rate under the same linear velocity of crystal movement. Finally, the uniformity of crystal growth has also been analyzed compared with the concentric rotation radius. It was found that the uniformity of crystal growth was best when the rotation radius was half of its allowable maximum value, and it was more conducive to the actual application of KDP crystals.     

图像处理技术在低逸出功印刷型FED中的应用

采用低成本、大面积、低逸出功FED阴极材料及其阴极浆料,研制了大面积印刷式FED(样机),具有自主知识产权,在国内外属首创。介绍了低逸出功可印刷型场致发射显示系统的工作原理、数字视频图像的转换和处理、视频数据的传输、列灰度驱动和行驱动集成电路以及FPGA控制技术等。为了改善场致发射显示器的显示效果,通过理论分析和实际验证提出了亮度非均匀性校正、γ校正、自动功率控制等相应的解决方案。将图像处理技术应用到驱动电路中,改善了图像的亮度均匀性和灰度再现质量,降低了整机的功耗。首次将本技术应用于大屏幕低逸出功印刷型63.5cm(25英寸)VGA级彩色FED驱动系统中,研制出了能显示彩色视频图像的彩色FED显示器样机。亮度达400cd/m2、对比度为1000∶1,电路灰度等级为256级。     

A class of band-limited chip waveforms for DS-CDMA systems

In Direct Sequence Code Division Multiple Access （DS-CDMA） systems, the chip waveform affects the implementation, system bandwidth, envelope uniformity, eye pattern and Multiple user Access Interference （MAI）. In this paper, based on an elementary density function of a second order polynomial, a class of second order continuity pulses is proposed. From this class of pulses, we can find some members having faster decaying rate, bigger eye opening, more uniform envelope and stronger anti-MAI capability than the Nyquist waveform. The normalized-bandwidth-pulseshape-factor product, the decaying rate of the tail of the time waveform, the opening of the eye diagram, and the envelope uniformity of the second order continuity pulses are addressed in the paper that provide the basic information for the selection of the chip pulse for CDMA systems.