PbO2阳极在硫酸溶液中的析氧失活行为

采用热分解鄄电镀法制备了以Sb 掺杂SnO₂(Sb-SnO₂)为底层的Ti 基PbO₂阳极(Ti/PbO₂). 采用加速电解寿命测试、电化学阻抗谱、XRD、SEM-EDX 等技术, 研究了Ti/PbO₂阳极在硫酸溶液中的电解失效行为和机制.结果表明,在新制备的PbO₂镀层中, 由于氧空位的存在, PbO₂镀层的内应力表现为拉应力, 随着电解的进行, 阳极表面生成的活性氧原子在向基底扩散的过程中, 将Pb³⁺态氧化为Pb⁴⁺态, 逐渐占据镀层内作为自由电子施主的氧空位, 这不仅导致镀层的导电性能下降, 同时使镀层的应力逐渐由拉应力转变为压应力, 镀层性质逐渐劣化. 这一过程基本结束时,活性氧原子才大量扩散至Ti基底导致基底的钝化, 在Ti 基底和镀层界面出现显著的界面应力, 在界面应力和镀层内压应力的共同作用下, 阳极出现鼓泡、脱落, 迅速进入失活阶段.     

氯化钠对锂离子电池石墨负极的修饰改性

Numerous carbonaceous materials have been studied as anodes of lithium ion batteries during the past several years[1￣4].Graphite was favored for battery applications because it exhibits a high specific capac- ity, low working potential close to that of l…     

Dissolution of copper foil in aqueous solution ofpH=2

The specific dissolution rate, expressed in mol cm^–2s^–1, and time-variation of the rest potential of copper foil in an aerated aqueous solution ofpH = 2.0 were measured.

---

Die Auflösbarkeit von Kupfer-Folie in wäriger Lösung von pH 2 (Kurze Mitteilung)

Zusammenfassung Es wurde die spezifische Auflösungsgeschwindigkeit (in mol cm^–2s^–1) und die zeitliche Veränderung des Restpotentials von Kupfer-Folie in einer belüfteten wäßrigen Lösung von pH 2,0 gemessen.

     

Molecular Adsorption-Induced Interfacial Solvation Regulation to Stabilize Graphite Anode in Ethylene Carbonate-Free Electrolytes

Many organic solvents have excellent solution properties, but fail to serve as lithium-ion batteries (LIBs) electrolyte solvents, due to their electrochemical incompatibility with graphite anodes. Herein, a new strategy is proposed to address this issue by introducing a surface-adsorbed molecular layer to regulate the interfacial solvation structure without the alteration of electrolyte composition and properties. As a proof-of-concept study, it is demonstrated for the first time that the intrinsically incompatible propylene carbonate (PC)-based electrolyte becomes completely compatible with graphite anodes by introducing a layer of adsorbed hexafluorobenzene (HFB) molecules to weaken the Li⁺-PC coordination strength and facilitate the interfacial desolvation process. As a consequence, the graphite/ NCM811 pouch cells using the PC-based electrolyte containing only 1 vol.% HFB demonstrate excellent long-term cycling stabilities over 1150 cycles. This strategy is also proved to be applicable to other ethylene carbonate (EC)–free electrolytes, thus providing a new avenue for developing advanced LIB electrolytes.     

Hydrated Bi-Ti-Bimetal Ethylene Glycol: A New High-Capacity and Stable Anode Material for Potassium-Ion Batteries

Potassium-ion batteries have emerged not only as low-cost alternatives to lithium-ion batteries, but also as high-voltage energy storage systems. However, their development is still encumbered by the scarcity of high-performance electrode materials that can endure successive potassium-ion uptake. Herein, a hydrated Bi-Ti bimetallic ethylene glycol (H-Bi-Ti-EG) compound is reported as a new high-capacity and stable anode material for potassium storage. H-Bi-Ti-EG possesses a long-range disordered layered framework, which helps to facilitate electrolyte ingress into the entire Bi nanoparticles. A suite of spectroscopic analyses reveals the in situ formation Bi nanoparticles within the organic polymer matrix, which can alleviate stresses caused by the huge volume expansion/contraction during deep cycles, thereby maintaining the superior structural integrity of H-Bi-Ti-EG organic anode. As expected, H-Bi-Ti-EG anode exhibits a high capacity and superior long-term cycling stability. Importantly for potassium storage, it can be cycled at current densities of 0.1, 0.5, 1, and 2 Ag⁻¹ for 800, 700, 1000, and even 6000 cycles, retaining charging capacities of 361, 206, 185, and 85.8 mAh g⁻¹, respectively. The scalable synthetic method along with the outstanding electrochemical performance of hydrated Bi-Ti-EG, which is superior to other reported Bi-based anode materials, places it as a promising anode material for high-performance potassium storage.     

Construction of VS2/VOx Heterostructure via Hydrolysis-Oxidation Coupling Reaction with Superior Sodium Storage Properties

Heterostructure engineering is one of the most promising modification strategies for reinforcing Na⁺ storage of transition metal sulfides. Herein, based on the spontaneous hydrolysis-oxidation coupling reaction of transition metal sulfides in aqueous media, a VO_x layer is induced and formed on the surface of VS₂, realizing tight combination of VS₂ and VO_x at the nanoscale and constructing homologous VS₂/VO_x heterostructure. Benefiting from the built-in electric field at the heterointerfaces, high chemical stability of VO_x, and high electrical conductivity of VS₂, the obtained VS₂/VO_x electrode exhibits superior cycling stability and rate properties. In particular, the VS₂/VO_x anode shows a high capacity of 878.2 mAh g⁻¹ after 200 cycles at 0.2 A g⁻¹. It also exhibits long cycling life (721.6 mAh g⁻¹ capacity retained after 1000 cycles at 2 A g⁻¹) and ultrahigh rate property (up to 654.8 mAh g⁻¹ at 10 A g⁻¹). Density functional theory calculations show that the formation of heterostructures reduces the activation energy for Na⁺ migration and increases the electrical conductivity of the material, which accelerates the ion/electron transfer and improves the reaction kinetics of the VS₂/VO_x electrode.     

A Materials Perspective on Direct Recycling of Lithium-Ion Batteries: Principles,Challenges and Opportunities

As the dominant means of energy storage technology today, the widespread deployment of lithium-ion batteries (LIBs) would inevitably generate countless spent batteries at their end of life. From the perspectives of environmental protection and resource sustainability, recycling is a necessary strategy to manage end-of-life LIBs. Compared with traditional hydrometallurgical and pyrometallurgical recycling methods, the emerging direct recycling technology, rejuvenating spent electrode materials via a non-destructive way, has attracted rising attention due to its energy efficient processes along with increased economic return and reduced CO₂ footprint. This review investigates the state-of-the-art direct recycling technologies based on effective relithiation through solid-state, aqueous, eutectic solution and ionic liquid mediums and thoroughly discusses the underlying regeneration mechanism of each method regarding different battery chemistries. It is concluded that direct regeneration can be a more energy-efficient, cost-effective, and sustainable way to recycle spent LIBs compared with traditional approaches. Additionally, it is also identified that the direct recycling technology is still in its infancy with several fundamental and technological hurdles such as efficient separation, binder removal and electrolyte recovery. In addressing these remaining challenges, this review proposes an outlook on potential technical avenues to accelerate the development of direct recycling toward industrial applications.     

Plasma Enhanced Lithium Coupled with Cobalt Fibers Arrays for Advanced Energy Storage

Construction of high efficiency and stable Li metal anodes is extremely vital to the breakthrough of Li metal batteries. In this study, for the first time, groundbreaking in situ plasma interphase engineering is reported to construct high-quality lithium halides-dominated solid electrolyte interphase layer on Li metal to stabilize & protect the anode. Typically, SF₆ plasma-induced sulfured and fluorinated interphase (SFI) is composed of LiF and Li₂S, interwoven with each other to form a consecutive solid electrolyte interphase. Simultaneously, brand-new vertical Co fibers (diameter: ≈5 µm) scaffold is designed via a facile magnetic-field-assisted hydrothermal method to collaborate with plasma-enhanced Li metal anodes (SFI@Li/Co). The Co fibers scaffold accommodates active Li with mechanical integrity and decreases local current density with good lithiophilicity and low geometric tortuosity, supported by DFT calculations and COMSOL Multiphysics simulation. Consequently, the assembled symmetric cells with SFI@Li/Co anodes exhibit superior stability over 525 h with a small voltage hysteresis (125 mV at 5 mA cm⁻²) and improved Coulombic efficiency (99.7%), much better than the counterparts. Enhanced electrochemical performance is also demonstrated in full cells with commercial cathodes and SFI@Li/Co anode. The research offers a new route to develop advanced alkali metal anodes for energy storage.     

钌—钛金属氧化物涂层电极的电子能谱分析

用X-光电子能谱分析了Ru-Ti金属氧化物电极的组成、结构和元素价态。结果表明,电极表面不同于体内,讨论了表面和体内Ti的价态区别对Ru-Ti阳极活性和寿命的影响,指出掺杂Ir和Pd后会提高电极活性。     

环氧环己烷的电化学合成

环氧环己烷的电化学合成何俊翔＊周锦成（温州师范学院化学系温州３２５００３）关键词电化学环氧化，环氧环己烷，环己烯，钛基氧化物电极１９９６－１１－２２收稿，１９９７－０６－０５修回间接电解氧化合成环氧化合物的研究已有报道［１～４］．它们均在铂电极上完成...