Nickel-cermet anode for fuel cells with the LSGM electrolyte

The effect of some technological parameters (firing temperature, thickness of an interphase layer made of solid electrolyte Ce_0.82Gd_0.18O_1.91 (GDC), the GDC electrolyte amount in nickel-cermet) on the electrochemical and electric properties of a nickel-cermet (Ni-GDC) anode intended for fuel cells with the La_0.88Sr_0.12Ga_0.82Mg_0.18O_2.85 (LSGM) electrolyte is studied. The polarization resistance of such an electrode is shown to hardly depend on the thickness of the interphase layer (4.5–23.5 μm) and the GDC electrolyte amount in nickel-cermet and to increase with the anode firing temperature. It is established that the contact resistance is concentrated in cells with the developed nickel-cermet electrode at the GDC/LSGM interface. At a temperature of 700°C the developed anodes may ensure a current density of 1 A cm^?2 at an overvoltage of less than 100 mV when using both moist hydrogen and a methane-oxygen mixture as the fuel.     

LSGMC5含量对于二甲醚燃料电池复合Ni-Fe阳极性能的影响

用浸渍法制备了掺杂不同质量分数的La0.8Sr0.2Ga0.8Mg0.15Co0.05O3-δ (LSGMC5)粉末的Ni8-Fe2-LSGMC5复合阳极, 并采用交流阻抗和直流极化技术考察了以氢气和二甲醚为燃气时该复合阳极的电化学性能及相应电池的功率输出特性. 结果表明, 在电极中掺入LSGMC5 粉末, 能显著地改善电极的形貌和电极/电解质界面结构, 减小欧姆电阻和极化电阻. 电极中LSGMC5 粉末含量对于氢气及二甲醚电化学氧化性能的影响显著不同. 以二甲醚为燃气时, 电极极化电阻随LSGMC5 粉末含量的增加而减小, 其中LSGMC5 掺杂量为30%的复合阳极具有最高的电化学性能, 相应电池在1073、1023、973 K 时的输出功率分别为1.00、0.61、0.40 W·cm-2; 以氢气为燃气时, LSGMC5 掺杂量为20%的复合阳极具有最好的电化学性能, 随着LSGMC5 掺杂量的进一步增加, 电极极化电阻显著增大.     

Electrochemical instability of bis(trifluoromethylsulfonyl)imide based ionic liquids as solvents in high voltage electrolytes for potassium ion batteries

1. Download : Download high-res image (153KB)
2. Download : Download full-size image

     

炼铝用碳阳极中碱金属氧化物作用机理的量子化学研究

本文应用CNDO/2法研究了炼铝用碳阳极中添加碱金属氧化物的吸附行为, 通过优化得到了吸附的最佳模型, 考察了吸附结合能随分子间距的变化, 进而给出了碱金属氧化物在碳阳极中作用的机理。量子化学计算结果表明: 碱金属氧化物添加到炼铝用碳阳极中起传输电子的电桥作用, 是碳阳极在空气中氧化反应以及铝电解时生成氧气的氧化反应的催化剂; 理论计算和实验结果二者吻合较好, 可以用来解释若干实验结果。     

ICP-AES法测定锌阳极中的铝、镉、铁、铜、铅

通过分析高频功率、雾化压力、辅助气流量和泵速等试验条件，建立了ICP-AES法测定锌阳极中铝、镉、铁、铜、铅的方法。用该方法测定锌阳极中的铝、镉、铁、铜、铅，其RSD分别为0.17%、0.63%、2.7%、5.2%、2.5%，回收率分别为99.3%-101.2%，99.3%-100.3%、97.1%-102.2%、97.8%-102.9%。对锌阳极试样进行测定，该方法的测定结果与GB4951-85方法的测定结果基本一致。     

Cellulose-precursor synthesis of nanocrystalline Ce<Subscript>0.8</Subscript>Gd<Subscript>0.2</Subscript>O<Subscript>2−δ</Subscript> for SOFC anodes

Developments of intermediate-temperature solid oxide fuel cells (IT SOFCs) require novel anode materials with a high electrochemical activity at 800–1070 K. The polarization of cermet anodes, made of nickel, ceria and yttria-stabilized zirconia (YSZ) and applied onto a YSZ solid electrolyte, can be significantly reduced by catalytically active ceria additions, the relative role of which increases with decreasing temperature. Further improvement is observed when using Ce_0.8Gd_0.2O_2– (CGO) having a high oxygen ionic conductivity instead of undoped ceria, owing to enlargement of the electrochemical reaction zone. Nanocrystalline CGO powders with grain sizes of 8–35 nm were thus synthesized via the cellulose-precursor technique and introduced into Ni–CGO–YSZ cermets, and tested in contact with a (La_0.9Sr_0.1)_0.98Ga_0.8Mg_0.2O_3– (LSGM) electrolyte at 873–1073 K. The results showed that the anode performance can be enhanced by additional surface activation, in particular by impregnation with a Ce-containing solution, and also by incorporation of YSZ, which probably acts as a cermet-stabilizing component. The overpotential of the surface-modified Ni–CGO (25 wt%–75 wt%) anode in a 10% H₂/90% N₂ atmosphere was approximately 110 mV at 1073 K with a current density of 200 mA/cm².Presented at the OSSEP Workshop Ionic and Mixed Conductors: Methods and Processes, Aveiro, Portugal, 10–12 April 2003     

Surface modification of carbon anodes for secondary lithium battery by fluorination

Recent results on the surface modification of petroleum cokes and their electrochemical properties as anodes of secondary lithium batteries are summarized. The surface of petroleum coke and those heat-treated at 1860-2800 °C were fluorinated by elemental fluorine (F₂), chlorine trifluoride (ClF₃) and nitrogen trifluoride (NF₃). No surface fluorine was found except only one sample when ClF₃ and NF₃ were used as fluorinating agents while surface region of petroleum coke was fluorinated when F₂ was used. Transmission electron microscopic (TEM) observation revealed that closed edge of graphitized petroleum coke was destroyed and opened by surface fluorination. Raman spectra showed that surface fluorination increased the surface disorder of petroleum cokes. Main effect of surface fluorination with F₂ is the increase in the first coulombic efficiencies of petroleum cokes graphitized at 2300-2800 °C by 12.1-18.2% at 60 mA/g and by 13.3-25.8% at 150 mA/g in 1 mol/dm³ LiClO₄-ethylene carbonate (EC)/diethyl carbonate (DEC) (1:1, v/v). On the other hand, main effect of the fluorination with ClF₃ and NF₃ is the increase in the first discharge capacities of graphitized petroleum cokes by ∼63 mAh/g (∼29.5%) at 150 mA/g in 1 mol/dm³ LiClO₄-EC/DEC.     

锂离子二次电池碳负极材料的改性

作为锂离子二次电池的碳负极材料，其改性方面的研究内容主要有：引入非金属元素，引入金属元素，处理表面及其它方面。纺入的非金属元素有硼，硅，氮，磷和硫。引入的金属元素有钾，铝，镓和钒，镍，钴，铜，铁等过渡金属元素。表面处理的方法包括氧化，形成表面层等。     

The influence of the sacrificial anode nature on the mechanism of electrochemical arylation and alkylation of white phosphorus

The material of the sacrificial anode has a substantial effect on the nature and yield of the target products of electrochemical phosphorylation of organic halides by white phosphorus in the presence of the nickel complexes with 2,2"-bipyridine. The use of the zinc anode results in the products with tricoordinated phosphorus, viz., triorganylphosphines, the reaction on the aluminum anode affords triorganylphosphine oxides, and the presence of Mg²⁺ ions in the reaction mixture provides the transformation of white phosphorus into cyclic phosphines (PhP)₅.     

Surface structure and electrochemical characteristics of natural graphite fluorinated by ClF3

Natural graphite samples with average particle sizes of 5, 10 and 15 μm (NG5 μm, NG10 μm and NG15 μm, respectively) were fluorinated by ClF₃ (3 × 10⁴ Pa) at 200 and 300 °C for 2 min. X-ray photoelectron spectra of surface-fluorinated samples showed that surface fluorine concentration increased with increase in the particle size of graphite and reaction temperature. Small amounts of chlorine were also detected in all the fluorinated samples. Raman spectra of original and surface-fluorinated samples indicated that the surface disordering was increased for NG10 μm and NG15 μm. Surface areas were decreased by the fluorination for NG5 μm and NG10 μm but unchanged for NG15 μm. The mesopores with diameter of 1.5-2 nm increased while those of 2-3 nm decreased for all the samples. First coulombic efficiencies for NG10 μm and NG15 μm were highly increased by surface fluorination in 1 mol/dm³ LiClO₄-EC/DEC/PC (EC: ethylene carbonate, DEC: diethyl carbonate, PC: propylene carbonate) solution.