Solution-Processable Low Voltage Organic Transistors of Thieno[3,2-b]thiophene-Based Conducting Polymer

A low-operating voltage and high performance polymeric field effect transistors using octadecylphosphonic acid-treated high-k AlOx and HfO₂ hybrid dielectrics were demonstrated. High-k metal oxide hybrid dielectrics were prepared by oxygen plasma treatment of deposited Al film for AlOx and by spin coating of solution-processable HfO₂ sol-gel solution for HfO₂ in combination with phosphoric acid-based self-assembled monolayer (SAM), resulting in high capacitance (10 nF/cm² for SiO₂, 600 nF/cm² for AlOx and 580 nF/cm² for HfO₂). With phosphoric acid-based SAM on high-k metal oxide and thermal annealing of thieno[3,2-b]thiophene-based conducting polymer, the device performance was significantly enhanced. The highest mobility of the transistors using ODPA-treated AlOx as a gate dielectric is 2.3 × 10^?2 cm² V^?1 s^?1 in the saturation region with the source-drain of ?2 V. In ODPA-treated HfO₂ hybrid dielectric, the saturated mobility is 1.1 × 10^?2 cm² V^?1 s^?1 and the threshold voltage was measured to be ?0.31 V, which is at least one order lower than SiO₂ hybrid dielectric (?3 V).     

Microstructure change in deuterium implanted CLAM steel induced by electron irradiation

As Reduced Activation Ferritic/Martensitic (RAFM) steel is considered the primary candidate for use as a structural material in fusion power reactors,many countries are developing different kinds of RAFM.China is developing new CLAM (China Low Activation Martensitic) steel.The study investigates microstructural changes in CLAM steel implanted with deuterium ions induced by 1250 keV electron irradiation from R.T.to 873 K,and observes both the growth and shrinkage of the defect clusters produced by deuterium ...     

STABILITY ANALYSIS OF A CAPACITIVE FGM MICRO-BEAM USING MODIFIED COUPLE STRESS THEORY

Based on the Modified Couple Stress Theory,a functionally graded micro-beam under electrostatic forces is studied.The FGM micro-beam is made of two materials and material properties vary continuously along the beam thickness according to a power-law.Dynamic and static pull-in voltages are obtained and it is shown that the static and dynamic pull-in voltages for some materials cannot be obtained using classic theories and components of couple stress must be taken into account.In addition,it is shown that the values of pull-in voltages depend on the variation through the thickness of the volume fractions of the two constituents.     

基于HV9910宽电压的自适应温度高亮度频闪灯

设计了一种基于HV9910的自适应温度宽电压范围的高亮度频闪灯,其利用HV9910的宽电压特性,可在10～50 V宽电压范围内高亮度工作。结合HV9910的LD端及二极管的热敏特性,使其根据内部温度变化调节频闪能量,并利用HV9910的内部电源给微功耗的MK6A12P单片机供电,使频闪灯具有过压保护及多种模式工作的功能。     

Microscopic Interface Between Two Immiscible Electrolytes: A Parallelism to an Ultramicroelectrode

Abstract

Current-potential response of a small interface formed between two immiscible solutions of electrolytes is examined. The diameter of the contact area made in a thin glass wall separating two solvents is approximately 130 μm. Ion transport across the nitrobenzene-water interface is studied by addition of probe semi-hydrophobic ions such as tetramethylammonium, tetraethylammonium, picrate, choline and dodecylsulfate to either aqueous or nonaqueous phase. The voltammetric behavior observed with the microinterface generally resembles that of a solid microelectrode of a similar radius. The contribution of ohmic drop becomes less significant with decrease of the interface area. This phenomenon permits voltammetric and amperometric measurements without using a potentiostat, and the solvent resistance is of a lesser problem.     

Band alignment in organic light emitting diodes - On the track of thickness dependent onset voltage shifts

In this paper we report on an unclear effect in the IV characteristics of organic light emitting diodes (OLEDs). When the thickness of the emitter layer based on a modified phenyl carbozole triplet host material (TH) in the device is increased, a significant shift of the onset voltage to higher values can be noticed. The voltage shift is not observed if the TH is substituted by an isomer with only minor variation of the molecular structure. In a previous publication we could already show that an electric interface field is necessary to describe the onset voltage behaviour. To find the origin of this interface field in the present publication the two isomers are characterized and the band alignment at the interfaces to the emitter layer is investigated using photoelectron spectroscopy. The interface energy diagrams have been measured on stepwise prepared model interfaces. A further simplification of the bipolar to a hole only device stack proofs, that band bending at the hole injecting interface to the TH layer is the origin of the interface field. In contrast an entire flat band situation is measured in case of the device using the other isomer showing no onset voltage shift.     

Pinacol Coupling of Aromatic Aldehydes and Ketones in Ethyl Acetate Mediated by TiCl4‐Mg

Titanium tetrachloride in ethyl acetate can be reduced by Mg powder to the corresponding low‐valent titanium complexes, which can reduce some aromatic aldehydes and ketones to the corresponding pinacols in 38–85% yields within 15–60 min at rt with stirring.     

A 3D-DCT video encoder using advanced coding techniques for low power mobile device

The three-dimensional discrete cosine transform (3D-DCT) has been researched as an alternative to existing dominant video standards based on motion estimation and compensation. Since it does not need to search macro block for inter/intra prediction, 3D-DCT has great advantages for complexity. However, it has not been developed well because of poor video quality while video standards such as H.263(+) and HEVC have been blooming. In this paper, we propose a new 3D-DCT video coding as a new video solution for low power mobile technologies such as Internet of Things (IoT) and Drone. We focus on overcoming drawbacks reported in previous research. We build a complete 3D-DCT video coding system by adopting existing advanced techniques and devising new coding algorithms to improve overall performance of 3D-DCT. Experimental results show proposed 3D-DCT outperforms H.264 low power profiles while offering less complexity. From GBD-PSNR, proposed 3D-DCT provides better performance by average 4.6 dB.     

Intrinsic current–voltage characteristics of metal-carbon nanotube networks: A first-principles study

The interconnections involving metal atoms in single-walled carbon nanotube (SWNT) networks are crucial for building nanoscaled devices. The influence of the metal-(η⁶-SWNT) interconnects in the electrical conductivity of SWNT film have been reported in recent experiments [X. Tian et al. Nano lett. 2014,14,3930]. Using non-equilibrium Green's function with density function theory, we performed theoretical calculations on the electron transport properties of (Cr, Li, Au)-SWNT systems. We revealed the roles of transition metal Cr, alkalis metal Li and inert metal Au in improving the electrical conductance of metal-SWNT systems. Our calculated results show that transport properties along the inter-tube direction are strongly dependent on the connecting metal atoms varying over many orders of magnitudes. Gold atoms fail to enhance the electrical conductance of SWNT systems. Meanwhile, negative differential resistances are demonstrated in semiconducting inter-tube models, which would have potential applications in the electronic device. Our results provide a promising way to optimize the performance of SWNT based networks.     

Reversible Flat to Rippling Phase Transition in Fe Containing Layered Battery Electrode Materials

Layered sodium transition metal oxides of NaTMO₂ (TM = 3d transition metal) show unique capability to mix different compositions of Fe to the TM layer, a phenomenon that does not exist in LiTMO₂. Here, a novel spontaneous TM layer rippling in the sodium ion battery cathode materials is reported, revealed by in situ X‐ray diffraction, Cs‐corrected scanning transmission electron microscopy, and density functional theory simulation, where the softening and distortion of FeO₆ octahedra collectively drives the flat TM planes into rippled ones with inhomogeneous interlayer distance at high voltage. In such a rippling phase, charge and discharge of Na ions take different evolution pathways, resulting in an unusual hysteresis voltage loop. Importantly, upon discharge beyond a certain Na composition, the rippling TM layer will go back to flat, giving the reversibility of such structural evolution in the following cycles.