电爆炸箔断路开关的理论和实验研究

 采用金属箔电爆炸过程的二维数值计算模型，对含电爆炸金属箔断路开关的电感储能脉冲功率调节系统进行了数值计算。以此为基础，研制出了一种低电感型的电爆炸箔断路开关，并以4μF/75kV脉冲电容器组作为初级能源，13Ω电阻作为负载进行实验研究。研究结果表明：在负载上可获得约250kV，脉宽大于400ns的脉冲电压。     

Frequency and voltage-dependent electrical and dielectric properties of Al/Co-doped PVA/p-Si structures at room temperature

In order to investigate of cobalt-doped interracial polyvinyl alcohol （PVA） layer and interface trap （Dit） effects, A1/p- Si Schottky barrier diodes （SBDs） are fabricated, and their electrical and dielectric properties are investigated at room temperature. The forward and reverse admittance measurements are carded out in the frequency and voltage ranges of 30 kHz-300 kHz and -5 V-6 V, respectively. C-V or er-V plots exhibit two distinct peaks corresponding to inversion and accumulation regions. The first peak is attributed to the existence of Dit, the other to the series resistance （Rs）, and interfacial layer. Both the real and imaginary parts of dielectric constant （er and err） and electric modulus （Mr and Mrr）, loss tangent （tan~）, and AC electrical conductivity （aac） are investigated, each as a function of frequency and applied bias voltage. Each of the M~ versus V and Mrr versus V plots shows a peak and the magnitude of peak increases with the increasing of frequency. Especially due to the Dit and interfacial PVA layer, both capacitance （C） and conductance （G/w） values are strongly affected, which consequently contributes to deviation from both the electrical and dielectric properties of A1/Co-doped PVA/p-Si （MPS） type SBD. In addition, the voltage-dependent profile of Dit is obtained from the low-high frequency capacitance （CLF-CHF） method.     

Hexacyanoferrate‐based ionic liquids as Fenton‐like catalysts for deep oxidative desulfurization of fuels

Two hexacyanoferrate‐based ionic liquids, [C₄Py]₃Fe(CN)₆ and [C₁₆Py]₃Fe(CN)₆, were synthesized and characterized using Fourier transform infrared and mass spectroscopies and CHN analysis. They were employed as Fenton‐like catalysts in extraction and catalytic oxidative desulfurization of model oil with dibenzothiophene (DBT), benzothiophene (BT), 4,6‐dimethyldibenzothiophene (4,6‐DMDBT), 4‐methyldibenzothiophene (4‐MDBT) and 3‐methylbenzothiophene (3‐MBT) as substrates. Various polar solvents, such as ionic liquids, water and organic solvents, were applied to choose a suitable extractant. The results showed the removal of DBT reached 97.1% with [C₄Py]₃Fe(CN)₆ as a catalyst and 1‐n‐octyl‐3‐methylimidazolium hexafluorophosphate ([C₈mim]PF₆) as an extractant under optimal conditions. The activity of sulfur removal followed the order DBT > 3‐MBT > BT > 4‐MDBT >4,6‐DMDBT. The effect of water content on sulfur removal was investigated by adding various concentrations of H₂O₂. It was found that excess water had a positive effect on sulfur removal but the catalysts were less sensitive than [FeCl₄^?]‐based catalysts to water. The mechanism was studied using electron spin‐resonance spectroscopy and gas chromatography–mass spectrometry. O₂^?? may be the active oxygen species in the catalytic oxidative desulfurization process and the oxidation products of various sulfur compounds were the corresponding sulfoxides and sulfones. Copyright © 2016 John Wiley & Sons, Ltd.     

LOW OXIDATION STATE GROUP 15 ELEMENTS AS PNICTA-WITTIG REAGENTS

We have synthesized a new As(I) salt and performed a Density Functional Theory investigation into the use of such compounds as pnicta-Wittig reagents.     

A central limit theorem in nonlinear filtering

It is shown that the probability law of a diffusion process conditioned on weakly corrupted observations is asymptotically Gaussian when properly scaled. The method of proof involves Fisher information matrices and a Cramér-Rao inequality.     

Open-circuit voltage exceeding the outermost HOMO-LUMO offset in cascade organic solar cells

We demonstrate a planar organic solar cell with a four-layer cascade architecture that exhibits an open-circuit voltage (Voc) greater than the offset in energy between the highest occupied molecular orbital (HOMO) of the outermost donor and the lowest unoccupied molecular orbital (LUMO) of the outermost acceptor. The device consists of a subphthalocyanine (SubPc)/fullerene (C60) heterojunction that is modified by inserting one or two additional donor layers between SubPc and the anode. We find that two-, three- and four-layer structures yield similar Voc (1.0 V, 0.91 V and 0.94 V, respectively), even though the outermost HOMO-LUMO offset decreases from 1.4 eV to 1.10 eV, and to 0.9 eV, respectively. Analysis of the turn-on voltage in dark provides further evidence that open-circuit voltage is not limited by the outermost HOMO-LUMO offset.     

Filling the Charge–Discharge Voltage Gap in Flexible Hybrid Zinc-Based Batteries by Utilizing a Pseudocapacitive Material

The high charge–discharge voltage gap is one of the main bottlenecks of zinc–air batteries (ZABs) because of the kinetically sluggish oxygen reduction/evolution reactions (ORR/OER) on the oxygen electrode side. Thus, an efficient bifunctional catalyst for ORR and OER is highly desired. Herein, honeycomb-like MnCo₂O_4.5 spheres were used as an efficient bifunctional electrocatalyst. It was demonstrated that both ORR and OER catalytic activity are promoted by Mn^IV-induced oxygen vacancy defects and multiple active sites. Importantly, the multivalent ions present in the material and its defect structure endow stable pseudocapacitance within the inactive region of ORR and OER; as a result, a low charge–discharge voltage gap (0.43 V at 10 mA cm⁻²) was achieved when it was employed in a flexible hybrid Zn-based battery. This mechanism provides unprecedented and valuable insights for the development of next-generation metal–air batteries.     

Synthesis and photovoltaic properties of conjugated side chains polymers with different electron‐withdrawing and donating end groups

A series of novel low band gap polymers containing conjugated side chains with 4,7‐dithien‐5‐yl‐2,1,3‐benzodiathiazole and different electron‐withdrawing end groups of aldehyde ( PT‐DTBTCHO ), 2‐ethylhexyl cyanoacetate ( PT‐DTBTCN ), 1,3‐diethyl‐2‐thiobarbituric acid ( PT‐DTBTDT ), and electron‐donating end group of 2‐methylthiophene ( PT‐DTBTMT ) have been designed and synthesized. All polymers exhibit good solubility in common organic solvents, film‐forming ability, and thermal stability. These conjugated polymers show the broad ultraviolet‐visible absorption and the narrow optical band gaps in the range of 1.65–1.90 eV. Through changing the end group of conjugated side chains, the photophysical properties and energy levels of the polymers were tuned effectively. Bulk heterojunction solar cells based on the blend of these polymers and (6,6)‐phenyl‐C₆₁‐butyric acid methyl ester (PC₆₁BM) reached the best power conversion efficiency (PCE) of 2.72%. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Control of thermoresponsivity of biocompatible poly(trimethylene carbonate) with direct introduction of oligo(ethylene glycol) under various circumstances

Poly(trimethylene carbonate) (PTMC) is a well‐known biodegradable polymer with good biocompatible properties which make it suitable for biomedical applications. Poly(5‐[2‐{2‐(2‐methoxyethoxy)ethyoxy}‐ethoxymethyl]‐5‐methyl‐1,3‐dioxa‐2‐one) (PTMC‐MOE3OM) and copolymers, bearing oligo ethylene glycol (OEG) at the side chain of PTMC backbone, were selected to investigate the cloud point behavior by solvents such as PBS, water, 10% ethanol solution and various ionic strengths. A pH‐responsive copolymer, poly(TMCM‐MOE3OM‐co‐(5‐methyl‐5‐carboxylic‐1,3‐dioxane‐2‐one)) as carboxylic acid carbonate showed a decreased critical temperature at pH 2. Photo‐responsive copolymer, poly(TMCM‐MOE3OM‐co‐coumarin derivatives) bearing 1% and 10% of photo‐induced molecules (7‐[(5‐(5‐methyl‐1,3‐dioxa‐2‐one)methoxy)]‐methoxy coumarin (TMCM‐coumarin)) exhibited a low cloud point because of the hydrophobic moieties. Meanwhile, alternative coumarin polymer including 2% of 4‐methyl‐7‐[(5‐(5‐methyl‐1,3‐dioxa‐2‐one)methoxy)butoxy)]‐methoxy coumarin (TMCM‐4‐methyl‐coumarin) has been successfully synthesized and copolymerized as a novel molecule. The various combinations of monomers were studied and the significant properties were determined via external triggers after copolymerization. This study showed basically synthetic progress toward designs and trivial rationalization of thermoresponsive copolymers close to body temperature. At present, various pendant groups as side part affect to the lower critical solution temperature (LCST) and biodegradable polymer in order to utilize the actual external stimuli application. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3466–3474