Microstructure and Magnetic Properties of Carbon‐Coated Nanoparticles

Abstract

In the present work, microstructure and superparamagnetic properties of two types of carbon‐coated magnetic Ni and Fe nanoparticles [Ni(C) and Fe(C)] are reviewed. High‐resolution transmission electron microscopy (HRTEM), electron diffraction (SAED), and x‐ray diffraction (XRD) analyses have been used to reveal the distinct structural morphologies of Ni and Fe nanoparticles. Moreover, novel carbon‐coated Ni nanoparticle assemblies offer us great opportunities for studying the mechanism of superparamagnetism in particle assemblies. Magnetization measurements [M(T) and M(H) curves] for assemblies of Ni nanoparticles indicate that modified superparamagnetic properties at T > T _B, have been found in the assemblies of Ni(C) particles. The blocking temperature, T _B, is determined to be near 115K under a certain applied field. Above T _B, the magnetization M(H, T) can be described by the classical Langevin function L using the relation, M/M _s (T = 0) = coth (μH/kT) ? kT/μH. It is suggested that these assemblies of carbon‐coated Ni nanoparticles have typical single‐domain, field‐dependent superparamagnetic relaxation properties. Finally, Mössbauer spectra and hyperfine magnetic fields at room temperature for the assemblies of Fe(C) nanoparticles confirm their distinct nanophases that were detected by structural analysis. Modified superparamagnetic relaxation is observed in the assemblies of Fe(C) nanoparticles, which is attributed to the nanocrystalline nature of the carbon‐coated nanoparticles.     

Emulsions of Heavy Crude Oils. II. Viscous Responses and Their Influence on Emulsion Stability Measurements

The stability of 30 heavy crude oil emulsions was studied in a parallel-plate laboratory coalescer (DC field). Particularly, viscous responses and their influence on the emulsion stability measurements were investigated. In addition to highlighting previous results from the same experimental setup and discussing these based on recent experience, new results at different temperatures and volume fractions of water were presented. A new semi-empirical model for the characteristic time of the destabilization process was presented. The electrical forces were modelled with a point-dipole approximation and the hydrodynamic resistance to droplet transport was modelled with an empirical term including the logarithmic viscosity of the oil phase. The new model clearly performed much better than the previous model, particularly for very viscous crude oils. Studies of the performance of industrial electrocoalescers have showed that simple electrostatic theory can potentially explain complex separation phenomena when the resistance to the coalescence step is reduced by an efficient demulsifier. The ultimate goal is to build a model for both the laboratory setup and the industrial coalescer so that laboratory experiments can be used to predict the behavior of the industrial process.     

Experimental Validation of the Temperature-Resistant and Salt-Tolerant Xanthan Enhanced Foam for Enhancing Oil Recovery

Xanthan enhanced foam (XGF) is a newly developed chemical agent for enhanced oil recovery in high-temperature and high-salinity reservoirs. In this paper, laboratory experiments were performed to characterize the morphology and foam properties of XGF, to study its performance under different temperature and different salinity conditions, respectively. Based on simulate reservoir formation conditions of Xidaliya field, a series of research on XGF were conducted. The experimental results showed that the scanning electron microscopy of XGF reflected a more viscoelastic and stable nature of the foam system. High temperature had a great adverse impact upon the stability of XGF, and the increase of salinity in the solution helped to improve the stability of foam. The foam stability increased remarkably when XG4 is added, and an increase in ambient pressure made enhancement of foam stability became more noticeable. In the presence of crude oil, Xanthan could enhance the stability of emulsions and was more favorable to stabilize foam. XG4 enhanced foam had dramatic properties for mobility controlling and oil displacement in the porous media.     

A Correlation of the Drag Force Coefficient on a Sphere with Interface Slip at Low and Intermediate Reynolds Numbers

The hydrodynamics of a sphere with interface slip has been numerically investigated for flows of Reynolds number ranging 0 < Re ≤ 75. A simple correlation of the drag force coefficient in the present of interface slip has been derived based on our numerical simulations. The correlation takes the slip coefficient and Reynolds number as two input parameters. By comparing results found in the literature, we believe that the present correlation is more accurate; it provides a source for future experiment study and for numerical simulations of large multi-particle system where the interface slip is important.     

Propylene Glycol and Ethoxylated Surfactant Effects on the Phase Behavior of Water/Sucrose Stearate/Oil System

In this work, we studied the phase behavior as function of temperature of water/sucrose stearate/propylene glycol/oil and water/sucrose stearate/ethoxylated mono‐di‐glyceride/oil systems. The oils were R (+)‐limonene, isopropylmyristate, and caprylic‐capric triglyceride. It was found that adding propylene glycol and ethoxylated mono‐di‐glyceride to the water/sucrose stearate/R (+)‐limonene and water/sucrose stearate/isopropylmyristate systems decreases the temperature and surfactants concentration needed for the formation of a microemulsion phase region and no three phase region is observed. In the case of water/sucrose stearate/caprylic‐capric triglyceride system a three phase region is observed. In the caprylic‐capric based system, it was found that increasing the propylene glycol and ethoxylated mono‐di‐glyceride contents decrease the phase inversion temperature and increases the efficiency. In the case where the mixed surfactants (sucrose stearate and ethoxylated mono‐di‐glyceride) were present in the system, the efficiencies observed are higher than those observed in the system based on the mixture of sucrose stearate and propylene glycol.     

Microwave‐Assisted Synthesis and Characterization of CuO Nanocrystals

CuO feather‐like and flower‐like crystals have been synthesized by a fast microwave‐assisted solution approach using Cu(NO₃)₂ and NaOH. The morphology transformation of CuO could be achieved by ionic liquid 1‐n‐butyl‐3‐methyl imidazolium tetrafluoroborate ([BMIM]BF₄). With [BMIM]BF₄, flower‐like CuO were obtained, whereas without [BMIM]BF₄, feather‐like CuO were obtained. The possible formation mechanism of flower‐like CuO was discussed on the basis of experimental results. The products were characterized by XRD, FESEM/EDS, and TEM/SAED. In addition, the adsorption of [BMIM]BF₄ on flower‐like CuO was confirmed by FTIR and TG/DSC, and the band gap energies of the flower‐like CuO was estimated by UV‐vis spectra.     

Micellar Enhanced Ultrafiltration of Reactive Black 5 from Aqueous Solution by Cationic Surfactants

Reactive black 5 (RB-5) dye was removed from a water stream using two cationic surfactants, cetyltrimethylammonium bromide (CTAB) and cetylpyridinium chloride (CPC), via micellar enhanced ultrafiltration. Three membranes with different pore size were used for the determination of rejection coefficient and permeate flux of the solution at 1.5 bar trans-membrane pressure (TMP). The two surfactants (CPC and CTAB) played an almost negligible role in rejection efficiency with 5000 and 10,000 molecular weight cut-off membrane (MWCO), respectively. In this case, high rejection and low permeate flux was the result of a larger molecular size of RB-5 DYE being retained by comparatively smaller sized pores of membrane via ultrafiltration. However, CPC and CTAB surfactants showed 83% and 98% rejection coefficient, respectively, at a concentration greater than their CMC values against 30,000 MWCO. Permeate flux remained low and constant in presence of 5000 and 10,000 MWCO with a small variation against 30,000 MWCO for the two surfactants, thereby no appreciable effect on both surfactant concentrations on concentration polarization was estimated. Thus, RB-5 dye alone was determined to be responsible for membrane plugging or concentration polarization and ultimately for low permeate flux. The effect of trans-membrane pressure was also investigated during this study.     

Effects of Spacer Chain Length and Additives on Solution Properties of Cationic Gemini Surfactant

The critical micelle concentration (CMC) has been determined for the gemini surfactant trimethylene-1,3-bis(dodecyldimethyl ammonium bromide)12-s-12,2Br^?1 by means of electricity conductivity measurements. For the same number of carbon atoms in the hydrophobic chain per hydrophilic head group, geminis have CMC values well below those of conventional single-chain cationic surfactants. The CMC of 12-3-12 reduces with the addition of n-alcohol except ethanol and with the increase of n-alcohol chain length as well as increase of concentration of n-butanol and sodium chloride. Steady-state fluorescence quenching technology has been employed to study the aggregation number of micelle, which increases with increase in the length of n-alcohol. The Kraft temperature measurements also indicate that the stability of solid surfactant hydrate decreases along with the improvement of concentration of n-butanol and sodium chloride.     

Oil-Water Partitioning of a Synthetic Tetracarboxylic Acid as a Function of pH

The oil-water partitioning of a synthetic tetraacid acting as a model compound for indigenous C₈₀-C₈₂ ARN acids has been studied as a function of pH, ionic strength and type of monovalent counterion. Experimental data obtained with ultraviolet-visible and HPLC/UV analyses have been fitted to thermodynamic models based on one, two or four dissociation steps to obtain o/w partition coefficients (K _wo ) of the fully protonated acid between chloroform and aqueous solutions, and its apparent acidity constant(s), pK _a. As the study is conducted above the CMC of the tetraacid, in general high apparent acidity constants were obtained in the range from 6 to 8 resulting from micellization equilibria. K _wo values were obtained in the range from 10^?3 to 10^?4, and decreasing with increasing salinity. At 50 mM K⁺, no conclusions could be made regarding the number of distinguishable dissociation steps, while at higher ionic strength (184 mM and 452 mM K⁺) and at 184 mM Na⁺ a model with two dissociation steps provided good fits to the experimental data. The first step was found to be given by a pK _a ≈ 6.6–6.8 and the second dissociation step at pK _a values ≈ 7.8–8.3. The two-step mechanism supports previous results obtained by potentiometric titrations. No significant difference in the o/w behavior was observed when changing the counterion from potassium to sodium. The main partitioning of the tetraacid in the aqueous phase occurred above pH 8, where the fully deprotonated acid was formed.     

反应温度对加氢残渣油四组分含量和结构的影响

以沙轻减渣为原料,在高压釜内研究了不同反应温度下加氢反应前后渣油的四组分含量及其结构组成变化。结果表明,加氢残渣油中的饱和分含量明显增加,而芳香分和胶质的含量均降低,四组分含量随反应温度的升高均呈现规律性变化。加氢后四组分的H/C摩尔比和平均相对分子质量均降低,芳碳分率增加。随反应温度升高,四组分的H/C摩尔比和平均相对分子质量降低,烷基碳分率降低;芳香分、胶质和沥青质的芳碳分率增加;胶质和沥青质的总环数和芳环数均降低。渣油加氢过程中四组分都发生了明显的氢解和脱烷基反应。加氢反应中,胶质和沥青质结构单元间的各种桥键可发生明显地断裂,导致其结构单元数减少,且结构单元数随反应温度的升高而减少。