The reinforcing effect of polydopamine functionalized graphene nanoplatelets on the mechanical properties of epoxy resins at cryogenic temperature

In order to obtain epoxy nanocomposites with excellent mechanical properties at cryogenic temperature, an efficient method to functionalize graphene nanoplatelets (GNPs) is proposed. Through a simple dip-coating procedure, the GNPs were first functionalized with deposition of polydopamine coating (PDA@GNPs). Then, using polydopamine as a bridge, the PDA@GNPs were modified with amine groups after polyetheramine T403 grafting (T403-PDA@GNPs). Fourier transform infrared spectroscopy, thermogravimetric analysis and X-ray photoelectron spectroscopy analyses proved the successful functionalization of PDA and polyetheramine T403 on the surface of GNPs. Adding 0.1 wt% T403-PDA@GNPs significantly improved the cryogenic tensile strength and impact strength of the epoxy nanocomposites by 34.5% and 64.5%, which showed greater reinforcing effect than the pristine GNPs (12.6% and 19.1%) and PDA@GNPs (26.3% and 50.1%). The results of dynamic mechanical analysis and scanning electron microscopy observations indicated that the PDA and further polyetheramine T403 functionalization improved the interfacial interactions between GNPs and matrix, which ensured the much improved mechanical properties.     

Well‐defined non‐linear polyethylene‐based macromolecular architectures

Polyethylene (PE)‐based 3‐ and 4‐miktoarm star [PE(PCL)₂, PE(PCL)₃] and H‐type [(PCL)₂PE(PCL)₂] block copolymers [polycaprolactone (PCL)] were synthesized by a combination of polyhomologation, chlorosilane chemistry, and ring opening polymerization (ROP). The following steps were used for the synthesis of the miktoarm stars: (a) reaction of a hydroxy‐terminated polyethylene (PE‐OH), prepared by polyhomologation of dimethylsulfoxonium methylide with a monofunctional boron initiator followed by oxidation/hydrolysis, with chloromethyl(methyl)dimethoxysilane or chloromethyltrimethoxysilane; (b) hydrolysis of the produced ω‐di(tri)methoxysilyl‐polyethylenes to afford ω‐dihydroxy‐polyethylene (difunctional initiator) and ω‐trihydroxy‐polyethylene (trifunctional initiator); and (c) ROP of ɛ‐caprolactone with the difunctional (3‐miktoarm star) or trifunctional macroinitiator (4‐miktoarm star), in the presence of 1‐tert‐butyl‐2,2,4,4,4‐pentakis(dimethylamino)‐2λ⁵,4λ⁵‐catenadi(phosphazene) (t‐BuP₂). The H‐type block copolymers were synthesized using the same strategy, but with a difunctional polyhomologation initiator. All intermediates and final products were characterized by HT‐GPC, ¹H NMR and FTIR analyses. Thermal properties of the PE precursors and all final products were investigated by DSC and TGA. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2129–2136     

In vivo lifetimes of the three color-sectors in bioluminescence emissions of the firefly Luciola praeusta at different temperatures

Bioluminescence emissions from fireflies have been well-studied for over a century. From the apparent features of the emitted light, conclusions have been drawn and hypotheses put forward on the characteristics of the highly efficient light emitting system. The basic emitter oxyluciferin, being chemically unstable, is difficult to study in isolation and, therefore, its analogs have been prepared and analyzed. In this letter, the lifetimes of the excited-state emitter oxyluciferin are measured, and an inference is drawn on the chemiluminescence reaction in vivo. The light from the Indian species of firefly Luciola praeusta contains three color-sectors: green, yellow, and red, and hence three optical filters are used to study time-resolved emissions from these sectors at different temperatures. All the three color-sectors are observed to be temperature sensitive in the time domain. An exponential variation of lifetime with temperature is observed for the emissions in these three regions.     

Synthesis and photovoltaic properties of conjugated side chains polymers with different electron‐withdrawing and donating end groups

A series of novel low band gap polymers containing conjugated side chains with 4,7‐dithien‐5‐yl‐2,1,3‐benzodiathiazole and different electron‐withdrawing end groups of aldehyde ( PT‐DTBTCHO ), 2‐ethylhexyl cyanoacetate ( PT‐DTBTCN ), 1,3‐diethyl‐2‐thiobarbituric acid ( PT‐DTBTDT ), and electron‐donating end group of 2‐methylthiophene ( PT‐DTBTMT ) have been designed and synthesized. All polymers exhibit good solubility in common organic solvents, film‐forming ability, and thermal stability. These conjugated polymers show the broad ultraviolet‐visible absorption and the narrow optical band gaps in the range of 1.65–1.90 eV. Through changing the end group of conjugated side chains, the photophysical properties and energy levels of the polymers were tuned effectively. Bulk heterojunction solar cells based on the blend of these polymers and (6,6)‐phenyl‐C₆₁‐butyric acid methyl ester (PC₆₁BM) reached the best power conversion efficiency (PCE) of 2.72%. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Large electro‐optic activity and enhanced temporal stability of methacrylate‐based crosslinking hyperbranched nonlinear optical polymer

A methacrylate‐based crosslinking hyperbranced polymers have been synthesized through initiator‐fragment incorporation radical polymerization and used for the temperature stable electro‐optic (EO) polymer application. This polymer consists of methyl methacrylate, 2‐metacryloxyethyl isocyanate, and ethylene glycol dimethacrylate (EGDMA) monomers. The use of EGDMA as a bifunctional unit resulted in the solvent‐soluble crosslinking hyperbranched chain, so that the EO polymer enhanced glass transition temperatures. A phenyl vinylene thiophene vinylene bridge nonlinear optical chromophore was attached to the polymer backbone as the side‐chain by a post‐functionalization reaction. The loading concentration of the chromophore was varied between 30 and 50 wt % by simply changing the mixing ratio of the precursor polymer to the chromophore. The synthesized EO polymers produced optical quality films with a light propagation loss of 0.61 dB/cm in a slab waveguide at 1.31 μm. The electrically poled film had an EO coefficient (r₃₃) of 139 pm/V at 1.31 μm. The EO crosslinking hyperbranced polymer had a high‐glass transition temperature of 170 °C, and exhibited excellent temporal stability of the EO activity at 85 °C for 500 h. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

An Experimental Study on Heat Transfer Coefficients of a CO2-Filled Thermosyphon

Abstract

Because carbon dioxide is ozone friendly and has negligible global warming potential, it has received renewed interest in recent years as an important alternative refrigerant. In this article, the heat transfer characteristics of a carbon dioxide-filled two-phase closed thermosyphon were investigated experimentally, and the empirical heat transfer correlations are reported. The heat transfer data were analyzed, and heat transfer coefficients were compared with conventional heat transfer correlations. The results represent that heat transfer correlation of the heated section can be expressed with Kutatelatze's correlation, and heat transfer coefficients of the condenser section are found to be in reasonable agreement with the Nusselt equation.     

Formation of a crosslinked POSS network by an unusual hydrosilylation: Thermo‐oxidative stabilization of the α‐cristobalite phase in its amorphous regions

A semicrystalline inorganic–organic hybrid crosslinked network containing polyhedral oligomeric silsesquioxane (POSS) cores was constructed by the unusual hydrosilylation of the terminal vinyl groups of an internal acetylene‐containing silane linker by a POSS monomer. Products from the thermal treatments of this network in either argon or air at 250, 550, and 1000 °C, respectively, were characterized by Fourier transform infrared, Solid‐state ¹³C and ²⁹Si magic angle spinning NMR, X‐ray diffraction and XPS analyses. The highly symmetrically functionalized POSS silica clusters, in the fluorite silica phase, in the network were found to remain unchanged on thermal treatment possibly due to the shielding of the silica core by the functionalities and a cancellation of thermal stresses on the silica core. Stabilization of the metastable α‐cristobalite phase, which is typically formed on cooling by a β‐ to α‐transition of the β‐cristobalite phase formed above 1400 °C, was observed in the amorphous regions in the network sample treated only to 1000 °C in air. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012