Combining Complementary Ligands into one Framework for the Construction of a Ferromagnetically Coupled [MnIII12] Wheel

Phenolic oxime and diethanolamine moieties have been combined into one organic framework, resulting in the formation of a novel ligand type that can be employed to construct a rare and unusual dodecametallic Mn wheel, within which nearest neighbours are coupled ferromagnetically.     

Photoionization and Pyrolysis of a 1,4‐Azaborinine: Retro‐Hydroboration in the Cation and Identification of Novel Organoboron Ring Systems

The photoionization and dissociative photoionization of 1,4‐di‐tert‐butyl‐1,4‐azaborinine by means of synchrotron radiation and threshold photoelectron photoion coincidence spectroscopy is reported. The ionization energy of the compound was determined to be 7.89 eV. Several low‐lying electronically excited states in the cation were identified. The various pathways for dissociative photoionization were modeled by statistical theory, and appearance energies AE_0K were obtained. The loss of isobutene in a retro‐hydroboration reaction is the dominant pathway, which proceeds with a reverse barrier. Pyrolysis of the parent compound in a chemical reactor leads to the generation of several yet unobserved boron compounds. The ionization energies of the C₄H₆BN isomers 1,2‐ and 1,4‐dihydro‐1,4‐azaborinine and the C₃H₆BN isomer 1,2‐dihydro‐1,3‐azaborole were determined from threshold photoelectron spectra.     

Coverage‐ and Temperature‐Dependent Metalation and Dehydrogenation of Tetraphenylporphyrin on Cu(111)

Using temperature‐programmed desorption, supported by X‐ray photoelectron spectroscopy and scanning tunneling microscopy, a comprehensive overview of the main reactions of 5,10,15,20‐tetraphenyl‐21H,23H‐porphyrin (2HTPP) on Cu(111) as a function of coverage and temperature is obtained. Three reactions were identified: metalation with Cu substrate atoms, stepwise partial dehydrogenation, and finally complete dehydrogenation. At low coverage the reactions are independent of coverage, but at higher coverage metalation becomes faster and partial dehydrogenation slower. This behavior is explained by a weaker interaction between the iminic nitrogen atoms and the Cu(111) surface in the high‐coverage checkerboard structure, leading to faster metalation, and the stabilizing effect of T‐type interactions in the CuTPP islands formed at high coverage after metalation, leading to slower dehydrogenation. Based on the amount of hydrogen released and the appearance in STM, a structure of the partially dehydrogenated molecule is suggested.     

Reactions in Nitroimidazole Triggered by Low‐Energy (0–2 eV) Electrons: Methylation at N1‐H Completely Blocks Reactivity

Low‐energy electrons (LEEs) at energies of less than 2 eV effectively decompose 4‐nitroimidazole (4NI) by dissociative electron attachment (DEA). The reactions include simple bond cleavages but also complex reactions involving multiple bond cleavages and formation of new molecules. Both simple and complex reactions are associated with pronounced sharp features in the anionic yields, which are interpreted as vibrational Feshbach resonances acting as effective doorways for DEA. The remarkably rich chemistry of 4NI is completely blocked in 1‐methyl‐4‐nitroimidazole (Me4NI), that is, upon methylation of 4NI at the N1 site. These remarkable results have also implications for the development of nitroimidazole based radiosensitizers in tumor radiation therapy.     

Observation of Unusual Molecular Diffusion Behaviour below the Lower Critical Solution Temperature of Water/2‐Butoxyethanol Mixtures by using Fluorescence Correlation Spectroscopy

The effect of solute affinity on solute diffusion in binary liquids well below the lower critical solution temperature (LCST) was studied by using fluorescence correlation spectroscopy. We measured the hydrodynamic radii of a hydrophobic and an amphiphilic fluorescent dye under systematic variation of the relative molar fractions of water/2‐butoxyethanol and, for comparison, of water/methanol mixtures, which do not show phase separation. We found that the apparent hydrodynamic radius of the hydrophobic dye almost doubled in water/2‐butoxyethanol, whereas it remained largely unchanged for the amphiphilic dye and in water/methanol mixtures. Our results indicate that the translational diffusion of solutes is influenced by transient local solution structures, even at temperatures well below the LCST. We conclude that, even far below LCST, different solutes can experience different environments in binary liquid mixtures depending on both the solute and solvent properties, all of which impact their reactivity.     

保留时间两点校正反相高效液相色谱法测定持久性有机污染物的正辛醇-水分配系数

采用改进的反相高效液相色谱法(RP-HPLC)测定了持久性有机污染物(POPs)包括多环芳烃(PAHs)、多氯二苯并二恶英(PCDDs)、多氯二苯并呋喃(PCDFs)和十溴二苯乙烷(DBDPE)等的正辛醇-水分配系数(logKow)。采用保留时间双点校正法(DP-RTC)校正因色谱柱老化等引起的保留时间漂移。以37种有可靠logKow实验值的苯系物、PAHs、PCDD/Fs类似物为模型化合物,建立了logKow和外推至纯水相的保留因子logkw的定量结构-色谱保留关系(QSRR)模型,回归方程为logKow=(1.18±0.02)logkw+(0.36±0.11),其相关系数(R2)为0.985,交叉验证相关系数(R2cv)为0.983,标准偏差(SD)为0.16。进而,用4个已有可靠logKow实验值的验证化合物(联苯、芴、PCDD 1和PCDF 114)对模型进行了外部验证,表明RP-HPLC测得的logKow值与摇瓶法/慢搅法结果有很好的一致性,尤其是对疏水性强的化合物。采用该模型测定了29种特别受关注的POPs的logKow值,这些化合物的logKow实验值均未见报道。所建立的DP-RTC-HPLC是测定强疏水性POPs的logKow值的一种值得推荐的方法。     

原位漫反射傅里叶变换红外光谱研究锰铁基催化剂上低温选择性催化还原反应机理简

采用自蔓延燃烧法制备了Ti_0.9Mn_0.05Fe_0.05O_2-δ催化剂,运用原位漫反射傅里叶变换红外光谱对该催化剂的NO和NH₃稳态吸附以及NO和NH₃瞬态反应进行了详细地分析与讨论. 结果表明,相比于Lewis酸性位,150℃时Brönsted酸性位吸附的NH₃更具有SCR活性;与双齿硝酸盐和桥式硝酸盐相比,NO吸附产生的单齿硝酸盐是主要的中间物种;该SCR反应遵循Eley-Rideal和Langmuir-Hinshelwood机理,但以后者为主. 另外,O₂的存在有利于NO的氧化和配位态NH₃的活化.     

Toughening of polycarbonate through reactive melt blending: Effect of hydroxyl content and viscosity of hydroxyl-terminated polydimethysiloxane

In this study, four hydroxyl-terminated polydimethylsiloxanes(PDMSOH) with different viscosities and hydroxyl contents were used to improve the toughness of polycarbonate(PC) through reactive melt blending. A largely improved toughness of PC has been achieved, and the low temperature toughness of PC/PDMSOH blends could overtake that of PC homopolymer in much higher temperatures(e.g.-10 °C versus 23 °C). Moreover, it was found that the more the hydroxyl content, the less the PDMSOH was needed to reach the highest toughness, suggesting that equivalent molar ratio between the carbonyl group content of PC and the hydroxyl group content of PDMSOH was required for the toughening of PC. Ultraviolet spectrophotometry was used to analyze the possible reaction between PC and PDMSOH. Contact angle was measured to assess the change of interfacial interaction between PC and PDMSOH as change of viscosity and hydroxyl content. The formation of PC-co-PDMSOH copolymer was believed to be the key for the toughening effect. This work gives a profound recommendation of the optimum kind and dosage of PDMSOH which should be used to improve the toughness of PC and will find immediate industrial applications.     

Near-infrared spectroscopic measurements of volume expansion and composition of CO2-expanded ethyl acetate,acetone, tetrahydrofuran,acetonitrile, methanol-OD,and dimethyl sulfoxide

CO₂-expanded liquid (CXL) is a mixture of organic solvent with high-pressure CO₂ whose volume is increased by CO₂ dissolved in it. CXLs have attracted attention as tunable solvents, because the solvent properties can be widely controlled by the pressure. The volume expansion and the solubility of CO₂ were measured by near-infrared spectroscopy for 6 CXLs at various pressures up to 55 bar and 40 °C. The molarity of organic solvent was determined from the absorbance of the 3ν and 2ν + δ bands, and that of CO₂ was obtained from the area of the 3ν₃ band, whose peak shifted to higher frequency with increasing pressure due to a decrease in the molecular interaction around CO₂. The expansion coefficient was shown to be an increasing function of the pressure with larger slope at higher pressure, and the mole fraction of CO₂ in the liquid phase was an almost linearly increasing function of the pressure. The results were in quantitative agreement with the literature data measured by conventional sampling method, indicating the validity of the spectroscopic method.