Failure analysis of Cu(In,Ga)Se2 photovoltaic modules: degradation mechanism of Cu(In,Ga)Se2 solar cells under harsh environmental conditions

High‐temperature‐induced and humidity‐induced degradation behaviors were investigated through the failure analysis of encapsulated Cu(In,Ga)Se₂ (CIGS) modules and non‐encapsulated CIGS cells. After being exposed to high temperature (85 °C) for 1000 h, the efficiency loss of CIGS modules and the resistivities of the aluminum‐doped zinc oxide (AZO) layer, CIGS layer, and Mo layer were slightly increased. After damp heat (DH) testing (85 °C/85% RH), the efficiency of some modules decreased significantly accompanied by discoloration, and in these areas, the resistivity of the AZO layers increased markedly. The causes of degradation of CIGS cells after high temperature and DH tests were suggested through X‐ray photoelectron spectroscopy analysis. The high‐temperature‐induced degradation behaviors were revealed to be increases in series resistance of the CIGS cells, due to the adsorption of oxygen on the AZO, CIGS, and Mo layers. The degradation behavior after DH (85 °C/85% RH) exposure was caused by the adsorption of oxygen, as well as the generation of Zn(OH)₂ due to water molecules. In particular, the humidity‐induced degradation behavior in discolored CIGS modules was ascribed to the generation of Zn(OH)₂ and carboxylic acids in the AZO layer, due to a chemical reaction between the AZO, ethylene‐vinyl acetate copolymer, and water. Copyright © 2014 John Wiley & Sons, Ltd.     

极性晶体膜中强耦合激子的性质

在强耦合极化子模型基础上,采用Lee-Low-Pines(LLP)变分法研究了极性晶体膜中激子与表面光学(SO)声子强耦合、与体纵光学(LO)声子弱耦合体系的性质.讨论了极性晶体膜中激子的诱生势与膜厚度和温度的变化关系.结果表明:激子的诱生势不仅与电子-空穴间距离有关,而且与极性晶体膜厚度有关,同时温度对激子诱生势的影响十分显著.     

Development of microscale pattern for digital image correlation up to 1400 °C

Speckle patterns to be used for digital image correlation (DIC) at the micrometer level up to 1400 °C were fabricated by several methods. The quality of the patterns before and after heating was evaluated in terms of the mean intensity gradient (MIG) and the speckle size distribution. The displacement accuracy in simulative translation of images showed that the MIG alone was not enough to evaluate the pattern properties; a large MIG, an even speckle size distribution, and a wide speckle size range pattern were required for a good DIC. The reaction between the patterning material and substrate, the cracking of speckles, and the plastic flow of patterning material may cause changes in the pattern morphology at high temperature. Two patterning methods, spraying a mixture of ceramics powder and binder by a fine-nozzle air brush and abrading a polished surface, yielded a small pattern with high MIG values and even size distributions that was stable at 1400 °C. The potential of the fabricated patterns was shown by measuring the coefficient of thermal expansion of polycrystalline Al₂O₃ from 800 °C to 1400 °C.     

Glow Discharge Characteristics of Hollow Needle-Plate Electrode in Atmospheric Pressure ArgonSCIEI北大核心CSCD

Atmosphere pressure uniform plasma has the broad application prospect in the industrial field. Using hollow needle cathode - plate anode device excited by direct-current voltage, a uniform and stable glow discharge is generated at atmospheric pressure in ambient air with argon used as working gas. The influence of the experimental parameters (including gas flow rate and the gas gap width) on discharge has been investigated by optical method. It can be found that a glow-discharge plasma column can bridge the two electrodes. The plasma column is uniform, and no filaments can be discerned. Near the plate electrode, the diameter of the plasma column is largest of all positions. The maximal diameter of the plasma column increases with increasing the discharge current or the gas flow rate. Through electrical method, the voltage-current characteristic has been investigated. It has been found that the discharge voltage decreases with increasing the current which is similar with the characteristic of glow discharge in low pressure. It increases with increasing the gas gap width or the gas flow rate. By analyzing the optical emission spectrum scanning from 330 to 450 nm emitted from the direct-current glow discharge, the molecular vibrational temperature and the intensity ratio of spectral lines I-391.4/I-337.1 have been investigated as functions of the gas flow rate and gas gap width. Results indicate that both the vibrational temperature and the intensity ratio of spectral lines I-391.4/I-337.1 decrease with increasing the gas flow rate or the gas gap width. In addition, the molecular vibrational temperature and the intensity ratio of spectral lines I-391.4/I-337.1 have been investigated in spatial resolution along the direction of gas flow(plasma column axial), and give a qualitative analysis as well. It is found that the vibrational temperature and the average electron energy increase with increasing the distance from the hollow needle cathode. These results are important to the industrial applications of glow discharge.     

改进蚁群PID-神经元解耦的CFB锅炉燃烧系统控制

床温和主汽压都是循环流化床锅炉生产运行中的重要参数,会直接影响机组的安全性和经济性。但由于这两者对象存在非线性、大时延、强耦合等特点,其现场控制效果一直不太理想。本文首先采用自适应神经元将床温和主汽压解耦,再利用具有分工特征的蚁群算法优化参数的PID控制器对两者进行独立控制。采用该算法优化常规PID控制参数,能够实现控制参数的快速寻优。该方案应用于循环流化床锅炉燃烧系统仿真,结果表明能有效实现系统解耦,且具有响应快、超调量小等优点,有效地提高了控制品质。     

Relaxation dynamics and fragility during liquid–glass transitions of poly(propylene glycol)s

The acoustic and thermal properties of the liquid–glass transitions of propylene glycol and its oligomers, poly (propylene glycol)s, were studied by temperature modulated DSC and Brillouin scattering. The fragility indices were determined from Angell plots using the observed modulation frequency dependence of the complex heat capacity. The variation in the glass transition temperatures is discussed on the basis of the free volume theory. The relaxation time of the structural relaxation obeys the Vogel–Fulcher law, and its high frequency end is in good agreement with the result of the dielectric measurement in the literature. The correlation between the observed thermal expansion coefficients and the glass transition temperature is discussed based on the free volume theory. The sound velocity and attenuation were accurately determined as a function of the temperature by Brillouin scattering by combination with the refractive index measurement. The relaxation dynamics were discussed by considering the relaxation from segmental motions. All of these physical properties were discussed based on the third-order anharmonicity and the Grüneisen parameter.     

Microwave absorbing properties of Fe3O4–poly(3, 4‐ethylenedioxythiophene) hybrids in low‐frequency band

A facile method is proposed to obtain microwave absorbing materials (MAMs), which possess strong microwave absorption properties in low‐frequency range. By simply mechanical mixing, the obtained Fe₃O₄–poly (3,4‐ethylenedioxythiophene) (PEDOT) hybrids exhibit more excellent microwave absorbing properties than that of Fe₃O₄ or PEDOT individually. The analysis on the microwave absorbing properties of the Fe₃O₄–PEDOT hybrids indicates that the excellent microwave absorbing properties are ascribed to several factors, like the dielectric loss, the interface polarization, eddy current effect, natural ferromagnetic resonance, and the impedance as well as the thickness of the coating. The Fe₃O₄–PEDOT hybrids with appropriate mass ratios of PEDOT to Fe₃O₄ (represented by (PEDOT)/(Fe₃O₄)) show superior microwave absorbing property at low frequency. When the thickness is 4 mm, the reflection loss of the sample reached ?15.8 dB at 3.2 GHz with (PEDOT)/(Fe₃O₄) of 3 and ?31.4 dB at 4.5 GHz with (PEDOT)/(Fe₃O₄) of 2, respectively. The obtained Fe₃O₄–PEDOT MAMs will have a promising application in the practical industry and commerce affairs. Copyright © 2013 John Wiley & Sons, Ltd.