A process–structure–property study of anisotropic PMDA-ODA films

A practical methodology for the correlation and prediction of the process–property performance of advanced materials is developed. The model polymer studied is PMDA-ODA polyimide. The connecting link between the process and the properties is the structural state of the polymer. An essential ingredient for a quantitative characterization of the system is a knowledge of its phase state and intrinsic molecular properties. The intrinsic molecular properties define the limiting performance properties available to the polymer. Anisotropic films and sheets produced by five different fabrication processes are examined. Maps of the molecular symmetry axis, the orientation function, and the thickness distributions of two 50-in.-wide sheets fabricated differently are measured nondestructively for process comparison. Four other film fabrication processes are examined and their three-dimensional orientation states determined and correlated. A three-dimensional orientation function triangular plot permits simultaneous representation of the different fabrication processes on the same figure and allows the investigator to choose the most economic and efficient fabrication route. The structure–property study includes the structural correlation and intrinsic molecular property determination of the anisotropic coefficient of thermal expansion (CTE), the anisotropic mechanical moduli and compliances, and the anisotropic dielectric constants. 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 777–788, 1997     

Moisture effects on the glass transition and the low temperature relaxations in semiaromatic polyamides

The influence of moisture absorption on the primary (glass) transition (T_a or T_g) and the low temperature relaxations of semiaromatic amorphous polyamides synthesized by isomeric aliphatic diamine and metha or para oriented phthalicdiacids has been investigated by means of differential scanning calorimeter (DSC) and dynamic mechanical thermal analyser (DMTA). The glass transition of semiaromatic polyamides was lowered due to the water absorption, and the β and the γ relaxations were as well. From the observed T_g and the difference in the heat capacity, the calculated T_g depression per 1 wt % water content was 12.3 K and the result was in good agreement with the experimental data. The depression of the glass transition may be expressed by the same manner as the plasticization of nylon 6 by water. The depressed β relaxation observed in the specimen containing a few percent of moisture was splitted into two transitions due to the reduction of water content, of which one was the elevation of the T_β and another was the simultaneous appearance of the T_γ, and then the single T_γ solely was observed for the completely dried specimen. The T_γ seemed to be merged into or not to be observed by the large and broad T_β transition when the sample was governed by a few percent of water, then it was emerged from the T_β due to water desorption. Thus, the T_β is believed to arise from the intermolecular hydrogen bonding between water molecules or between water and amide groups in wet polyamides. In addition, the γ relaxation originated from the peptide groups is attributable to the inter- and intramolecular hydrogen bonding between amide groups. © 1997 John Wiley & Sons, Inc. J Polyn Sci B: Polym Phys 35: 807–815, 1997     

Ni^2—交换蒙脱石中的镍物种及焙烧温度影响研究

对一组自制Ｎｉ＾２＋交换蒙脱石样品中镍物种的存在在形及焙烧温度影响进行了ＴＰＲ和ＸＲＤ考察结果表明，样品中镍负载量等于或小于Ｎｉ＾２＋的交换量时，镍主要以难还原听可交换性阳离子Ｎｉ（ＯＨ）＾ｑ＋ｘ和易还原的自由态镍Ｎｉ（ＯＨ）２或ＮｉＯ两种形式存在。     

Propagation velocity of the reaction front in addition polymerization systems

Traveling polymerization fronts in unstirred solutions of methylmethacrylate, methacrylic acid, or acrylamide with some free radicals initiators (through thermal decomposition) have been observed experimentally. A local heating of the initial reactant mixture, under suitable conditions, leads to a reaction front that propagates along the space coordinate with a constant velocity. In this article, a physical interpretation of this phenomenon is provided through a mathematical model that accounts for the depolimerization reaction and is based on the constant pattern approach. Moreover, an approximate explicit analytic expression for the velocity of propagation of the polymerization front is proposed. The theoretical values are compared with those measured experimentally as a function of the initiator concentration for different addition polymerization systems. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35:1047–1059, 1997     

Quercetin enhances vitamin D2 stability and mitigate the degradation influenced by elevated temperature and pH value

Vitamin D₂ (vit. D₂) is a nutraceutical essentially needed for good health. However, it is susceptible to oxygen and high temperature. The use of natural products such as bioflavonoids possessing anti-degradative effect of vit. D₂ degradation has not been described before. A combinational effect of vit. D₂ with quercetin showed a positive effect and inhibited vit. D₂ degradation when exposed to high temperature (50 ℃ and 75 ℃) at different time points. The results obtained revealed vit. D₂ degradation was drastically increased with longer incubation under thermal treatment. However, quercetin and vit. D₂ groups were able to significantly inhibit the degradation of vit. D₂ and stabilize it, evaluated through the retention percentage. We also exposed vit. D₂ at solutions with different pH values (1, 4, 5, 7, 10). Quercetin exerted vit. D₂ anti-degradation at different pH values as well as under thermal pressure at different time points. Conclusively, quercetin can be an effective way to reduce temperature and pH induced degradation of vit. D₂.     

Improvement in the Physicochemical Properties of Ketoconazole through Complexation with Cyclodextrin Derivatives

Highly-soluble cyclodextrin derivatives, such as hydroxypropyl--cyclodextrin(HP--CD) and methyl--cyclodextrin (MEB), were tested as solubilizingagents for ketoconazole, with the aim of improving the physicochemical andbiopharmaceutical properties of this lipophilic imidazole antifungal agent. Productswere prepared in four molecular ratios by physical mixing, kneading and spray-dryingmethods. The kneaded products in a ratio of 1:2 and the spray-dried products exhibitedthe highest dissolution rates. The phase solubility diagrams of ketoconazole with thesecyclodextrins at 25 °C in water and in simulated intestinal medium wereconstructed. A solubility diagram of A_L type was obtained with HP--CD, and one of A_P type with MEB. The complexes were characterized by thermal methods(DSC, TG, DTG and DTA). Multicomponent systems were prepared with tartaric acid.The effects of water-soluble polymers, e.g., polyvinylpyrrolidone, on the aqueous solubility of ketoconazole were investigated. Particle size distribution, surface area, partition coefficient, heat of dissolution and wettability studies were also carried out. The formation of inclusion complexes was observed by means of thermoanalytical studies.     

4,4＇-二苯氧基二苯砜、4,4＇-二苯氧基二苯酮、对苯二甲酰氯三元共聚物的合成

聚醚酮醚酮酮;4;4＇-二苯氧基二苯砜、4;4＇-二苯氧基二苯酮、对苯二甲酰氯三元共聚物的合成;聚醚砜醚酮酮;低温溶液浓缩聚     

具有苯烷基侧链的芳香液晶聚酯的合成及性质

以熔融缩聚方法全盛了具有苯烷基侧链取代的全芳香液晶聚酯，用TG，DSC，热台偏光显微镜研究了聚酯的热性能，并讨论了取代基对聚酯热性能的影响，所有合成的聚酯均为热致型液晶，且具有较低的相转变温度。特别是当聚对苯二甲酸对苯二酚酯的两个苯环上分别取代了叔丁基和苯烷基，或取代了两个苯烷基侧链后，聚酯的熔融温度下降到225℃以下，并可在室温下溶于普通的有机溶剂中。     

低能离子散射谱分析中的荷电效应及中和作用

用低能离子散射谱（ISS）对比分析了与样品托有良好电接触的和与样品托绝比的金属银片，观察到荷电效应对ISS分析有严重影响。实验还表明在ISS分析时使用低能电子中和枪可以有效地消除荷电效应，还发现电子中和枪的使用对于惰性气体离子的中和作用无明显影响。