Formation at low surfactant concentrations and characterization of mesoporous MCM-41

At low concentrations of cetyltrimethylammonium bromide,all silica-based mesoporous materials with hexagonal phase have been synthesized via interactions between self-assembled surfactant molecule aggregates and aniomc silicate polymers.The resulting materials are characterized by XRD,FT-IR,solid state 29Si MAS NMR,thermal analysis and N2 adsorption-desorption measurements.After soluble ions are removed,the interactors between surfactant micelles and silicate polymers are reorganized and then form mesostructures 1 he hexagonal framework is sonsistent with amorphous silica gel.The structures of materials depend on the synthesis conditions Hydrothermal process improves the interactions between molecules and increases the degree of framework silicon atom polymerization The.surface area and the mesopore volume of the material prepared at 100℃ increase by 87% and 71 %,respectively,compared with those obtained at room temperature.     

Xylanolytic enzyme production by anAspergillus niger isolate

Production of xylanolytic enzymes by anAspergillus niger CCMI 850 isolate was investigated in batch cultures. The effect of the composition of a fermentation medium that did not include chemical inducers, on β-xylanase, β-xylosidase, α-l-arabinofuranosidase, and total cellulase activity was studied. With 4% xylan as the carbon source, about 65 U/mL of β-xylanase was obtained, whereas the total cellulase activity was undetectable, under the specified conditions. This β-xylanase activity represents the highest reported for a wild-type strain ofA. niger. The effect of pH and temperature on the activity of β-xylanase was studied. Partial characterization of the β-xylanase showed that with insoluble birchwood as substrate theK _m andV _max were 0.3 mM and 19 μmol/min, respectively. Aspects of using the crude β-xylanase preparation for applications in the pulp and paper industry were discussed.     

The use of glass capillary columns for the analysis of polar natural products

Two published procedures for glass capillary column production are applied to produce capillaries for chromatography of polar natural compounds. Soda lime glass capillaries, after leaching with aqueous HCL, are either treated with colloidal silicic acid or with barium carbonate and coated with either Silar 7CP or SE 52. A test mixture as well as polar carbohydrate and peptide mixtures are chromatographed on the different columns and their chromatographic properties are evaluated. Combined capillary gas chromatography-electron impact and chemical ionization mass spectrometry are used for identification of the peptide sequence.     

Structure formation in heavy metal oxyhydrates at low rates of gel formation

Oxyhydrate gels have a hydrophilic surface, due to which they undergo destruction and secondary polymerization in aqueous media. Prolonged storage in aqueous solution gives rise to regions with selfsimilar helical ordering in gels. Structuring of this kind is also observed when synthesis is conducted under conditions that provide low gelation rates. Electromagnetic UV and visible radiation is another means to change the gel structure; it makes the oligomer species pass into the excited state, due to which one of the directions of structuring becomes dominant. This work summarizes the results of computer simulation of gel agglomerates. For oxyhydrate systems, helical ordering was found to be one of the local energy minima. The units of a macrohelix can lie at various angles relative to one another, and they can change, after absorption of energy, the helix pitch and the order of elements in the helix.     

Crystallization Temperature Limit of (Ba,Sr)TiO<Subscript>3</Subscript> Thin Films Prepared by a Non Oxocarbonate Phase Forming CSD Route

A new chemical solution deposition (CSD) route for the fabrication of Ba_0.7Sr_0.3TiO₃ (BST) thin films has been developed which completely prevents the formation of an intermediate oxo-carbonate phase. The latter has been reported previously by several authors to be responsible for increased crystallization temperatures. Barium and strontium diaminoethoxides were synthesized starting from pure barium and strontium metal and aminoethanol. These alkoxides were found to be readily soluble in a wide range of solvents and thus were excellent candidates for the CSD process. To prepare a stable precursor solution the aminoalkoxides were dissolved in 2-butoxyethanol and then used for the deposition of BST thin films. We conclude that the minimum crystallization temperature of 600C to be independent of the formation of the oxo-carbonate phase. DTA-TGA were performed on the precursors and their solutions to study their decomposition behaviour. All films annealed at different temperatures were physically characterized by XRD, IR, and SEM. The films prepared by this route at 650C were found to have high dielectric constant and the leakage currents were comparable to BST films prepared by normal carboxylate based routes at 750C.     

The preparation of thick-film glass capillary columns

A detailed method for the routine preparation of glass capillary columns is presented. The method consists of coating a glass tube with quartz powder prior to pulling the tube into a capillary. The inner surface of the capillary consists of an even distribution of quartz particles fused to the walls. This surface has been found readily deactivated by standard procedures and ideal for the preparation of thick-film glass capillary columns. The method has been thoroughly tested in two independent laboratories to ensure that the procedures described are reproducible.     

4G载波向5G重耕之前的5G业务覆盖能力研究

为了满足低成本建设5G广覆盖网络的需求,需要提前研究低频3G、4G网络向5G重耕的最佳方案。在没有进行重耕,因而没有理想的低频5G测试环境的情况下,采用理论分析的手段进行重耕后的覆盖能力估算。以未来L900重耕用于5G广覆盖为例,探讨了链路预算的关键设定、模型选择等问题,并通过多个本地网实际测试数据间接验证估算结果的合理性。所得结论已实际应用于某大运营商对全国900 MHz网络的规划方案,对于指导网络重耕具有重要的借鉴意义,也为面向覆盖和感知的6G网络演进及重耕提供了参考模型。     

用于高能物理实验电子读出芯片的低噪声锁相环芯片设计

基于TSMC 180 nm工艺设计并流片测试了一款用于高能物理实验的电子读出系统的低噪声、低功耗锁相环芯片。该芯片主要由鉴频鉴相器、电荷泵、环路滤波器、压控振荡器和分频器等子模块组成,在锁相环电荷泵模块中,使用共源共栅电流镜结构精准镜像电流以减小电流失配和用运放钳位电压进一步减小相位噪声。测试结果表明,该锁相环芯片在1.8 V电源电压、输入50 MHz参考时钟条件下,可稳定输出200 MHz的差分时钟信号,时钟均方根抖动为2.26 ps(0.45 mUI),相位噪声在1 MHz频偏处为-105.83 dBc/Hz。芯片整体功耗实测为23.4 mW,锁相环核心功耗为2.02 mW。     

一种高增益的宽带低噪声放大器的设计

采用SANAN公司的0.25μm E-Mode pHEMT工艺,基于ADS仿真,设计了一款工作频率为2.0～4.2 GHz的两级级联的宽带LNA芯片。芯片采用电阻偏压的方式,实现了3.3 V单电源供电。同时,设计了一种改进型的RLC并联负反馈结构,实现了宽带匹配。仿真结果表明,该LNA在2.0～4.2 GHz频段内,最大增益为30.9 dB,增益平坦度为±0.6 dB左右,输入回波损耗小于-9 dB,输出回波损耗小于-12 dB;噪声系数为(1.2±0.14) dB;系统稳定性因子K在全频带内大于2.8;芯片面积为0.78 mm×2.2 mm。     

低功耗SAR ADC的高性能比较器综述

目前逐次逼近型模数转换器(SAR ADC)已经成为低功耗数模混合集成电路中模数转换器的首选架构,其中的核心模块—高性能比较器的功耗大小直接决定了SAR ADC的整体功耗。文章从低功耗SAR ADC系统出发,聚焦高性能低功耗电压域和时间域比较器的发展历程与最新研究进展,总结了通过优化SAR逻辑实现低功耗比较器的技术方法。该综述为数模混合电路设计者了解并掌握SAR ADC中高性能低功耗比较器技术提供有力参考。