The Segal-Bargmann transform for Lévy white noise functionals associated with non-integrable Lévy processes

By using a method of truncation, we derive the closed form of the Segal-Bargmann transform of Lévy white noise functionals associated with a Lévy process with the Lévy spectrum without the moment condition. Besides, a sufficient and necessary condition to the existence of Lévy stochastic integrals is obtained.     

异质结双极晶体管高频噪声建模及分析

提出了一个T等效异质结双极晶体管高频噪声电路模型.该模型是对通常用在硅双极晶体管中的Hawkins噪声模型进行改进得到的,主要的改进包括发射极理想因子、发射极电阻、内部BC结电容、外部BC结电容和其它寄生元素对器件噪声性能的影响.为了从等效噪声电路模型中计算出精确的噪声参数,采用了噪声相关矩阵法来计算噪声参数,从而避免了在等效电路变换中可能产生的简化和复杂的噪声测量.进一步利用该模型分析了等效电路元素对器件最小噪声系数的影响,分析计算结果和物理解释一致.同时通过基于异质结双极晶体管器件物理的公式,给出了器件参数对器件最小噪声系数的影响.     

Short-Time Decoherence of Solid-State Qubit at Optimal Operation Points

We investigate the short-time decoherence of a solid-state qubit under Ohmic noise at optimal operation points. The decoherence is analyzed by maximum norm of the deviation density operator. It is shown that at the temperature T = 3 mK, the loss of the fidelity due to decoherence is much smaller than the DiVincenzo low decoherence criterion, which means that the mode/may be an optimal candidate of qubit for quantum computation.     

A 64 kbit/s Videophone codec with forward analysis and control

A new combination of coding methods for a 64 kbit/s transmission system for typical videophone situations is investigated. The codec structure is based on a standard hybrid discrete cosine transform (DCT) codec with temporal prediction. The picture is divided blockwise into changed and unchanged areas. One motion vector with subpel accuracy is computed and transmitted for each block of the changed area. For the forward analysis, the prediction error is calculated in the whole picture. Only the blocks with the highest prediction errors are updated by a DCT with a perception adaptive quantization. The number of DCT update blocks depends on the remaining bits after the transmission of the overhead information. The codec is controlled by a forward analysis of the prediction error and is not based on a buffer control. The spatial resolution of the source signal is reduced in two steps to prevent a codec overload caused by too much activity between two frames.     

平滑树脂基板上的金属化工艺

概述了平滑树脂基板上的金属化工艺，可以在具有优良性能的液晶聚合物和环烯聚合物上应用紫外光表面改质处理形成良好导电性的导体层，可以制造适应高速传递或者高频用途的平滑电路。     

中小功率CO2激光的厚板切割技术

分析了激光厚板切割技术的能量平衡和技术难点,具体介绍了几种厚板切割新技术,包括预热法、散焦法、激光锯切法、双聚焦法.并从工艺角度分析了几种切割技术的优缺点.     

Controlled Synthesis of CdClOH Sub-nanocones by Low-temperature Solution Process and Their Transformation into CdS Hollow Sub-nanocones

Novel CdClOH sub‐nanocone crystals were successfully synthesized on a large scale by a facile solution‐based method using polymers as crystal growth modifiers. The crystals showed cone‐like morphology. Some factors affecting the morphology and size of the product, such as reaction temperature, concentrations of polyacrylamide (PAM), and pH value of the solution, were systematically studied. Experiments implied that polymer PAM played a key role in the formation of CdClOH sub‐nanocones. A possible formation mechanism of CdClOH sub‐nanocones was suggested based on nucleation‐etching process‐recrystallization in a mild aqueous solution. Furthermore, the as‐prepared CdClOH sub‐nanocones could be further transformed into CdS hollow sub‐nanocones by an anion‐exchange reaction.     

Scalability of Optical Networks: Crosstalk Limitations

Optical networks represent a promising solution for the future high capacity and flexible transport network. This paper presents a model for the performance evaluation of optical networks with respect to linear crosstalk and accumulated spontaneous emission noise. The proposed model is intended for the evaluation of the crosstalk requirements on the devices needed to support an optical network with a certain number of nodes and with a given level of bit-error rate.     

Negative‐type photosensitive poly(phenylene ether) based on poly(2,6‐dimethyl‐1,4‐phenylene ether), a crosslinker,and a photoacid generator

A negative‐type photosensitive poly(phenylene ether) (PSPPE) based on poly(2,6‐dimethyl‐1,4‐phenylene ether) (PPE), a novel crosslinker 4,4′‐methylene‐bis [2,6‐bis(methoxymethyl)phenol] (MBMP) having good compatibility with PPE, and diphenylidonium 9,10‐dimethoxy anthracene‐2‐sulfonate (DIAS) as a photoacid generator (PAG) has been developed. This resist consisting of PPE (73 wt %), MBMP (20 wt %) and DIAS (7 wt %) showed a high sensitivity (D_0.5) of 58 mJ/cm² and a contrast (γ_0.5) of 9.5 when it was exposed to i‐line (365 nm wavelength light), postexposure baked at 145 °C for 10 min, and developed with toluene at 25 °C. A fine negative image featuring 6 μm line‐and‐space pattern was obtained on the film exposed to 300 mJ/cm² of i‐line by a contact‐printed mode. The resulting polymer film cured at 300 °C for 1 h under nitrogen had a low dielectric constant (ε = 2.46) comparable to that of PPE and a higher T_g than that of PPE. In addition, the cured PSPPE film was pretty low water absorption (<0.05%) as same as PPE. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4949–4958, 2008