用小波变换抑制SAR图像中的斑点噪声

抑制合成孔径雷达图像中的斑点噪声一直是处理图像并得到准确图像信息的难点，提出了一种基于小波变换抑制合成孔径雷达（SAR）图像中的斑点噪声的方法，对原有的小波变换方法作了改进，能更好地保留图像的边缘信息，并能简化计算量。在仿真实验中使用了合成的模拟图像和真实的合成孔径雷图像，并与以往的小波去噪滤波方法以及一些经典的斑点噪声滤波方法（包括中值滤波，Lee滤波，Frost滤波）进行比较，在综合考虑了滤波算法在均匀区域对斑点噪声的抑制能力以及保留边缘信息能力的情况下，提出的算法有更好的效果。     

低相噪,低杂波数字锁相环路滤波器的设计

较详细地分析数字锁相频率合成器的相位噪声，着重用控制论方法对低相噪、低杂波锁相环的环路滤波器进行设计，并用某Ｓ波段频率合成器的实验结果进行了验证。     

群时延精确设计的全差分四阶Bessel滤波器

采用MOS管有源电阻,提出了一种全差分R-MOSFET-C四阶Bessel有源低通滤波器,.通过调节工作于亚阈值区的CMOS管的沟道导纳补偿电阻值的大小,能抵消集成电路制造工艺中电阻值的一致偏差,实现Bessel有源滤波器群时延的精确设计.根据无源滤波器的状态方程完成有源滤波器的综合,应用3.3V,0.5μm CMOS工艺完成了群时延大小为0.75μs的四阶Bessel低通滤波器的管极计算机仿真,仿真结果表明所提电路正确有效,适于全集成.     

铜互连中SiCOF/a-C∶F双层低介电常数薄膜的制备和表征(英文)

用等离子体化学气相淀积系统制备了一种新颖的SiCOF/a-C∶F双层低介电常数介质薄膜,并用红外光谱表征了该薄膜的化学结构.通过测量介质的折射率发现该薄膜长时间暴露在空气中,其光频介电常数几乎不变.然而,随退火温度的增加,其光频介电常数则会减小.基于实验结果讨论了几种可能的机理.二次离子质谱分析表明在Al/a-C∶F/Si结构中F和C很容易扩散到Al中,但在Al/SiCOF/a-C∶F/Si结构中,则没有发现C的扩散,说明SiCOF充当了C扩散的阻挡层.分析还发现在SiCOF和a-C∶F之间没有明显的界面层.     

一种低压低功耗SRAM/SOI单元设计

提出一种改进4管自体偏压结构SRAM/SOI单元.基于TSUPREM4和MEDICI软件的模拟和结构性能的分析,设计单元结构并选取结构参数.该结构采用nMOS栅下的含p+埋沟的衬底体电阻代替传统6管CMOSSRAM单元中的pMOS元件,具有面积小、工艺简单的优点.该结构可以在0.5V的电源电压下正常工作,与6管单元相比,该单元瞬态响应正常,功耗只有6管单元的1/10,满足低压低功耗的要求.     

降低雷达接收机中噪声的几种方法

噪声是影响雷达接收机灵敏度的重要因素。本文通过讨论雷达接收机噪声的来源，分析并提出了集中降低雷达接收机内部和外部噪声的几种方法，具有一定的实际意义。     

111In–L–LDL and 153Gd–L–LDL as radiotracers for detection of AR4‐2J rat pancreatic tumors

Pancreatic cancer has an extremely poor prognosis, due, in part, to lack of methods for early diagnosis. The present study was designed to evaluate the potential of labeling low‐density lipoprotein (LDL) with a radionuclide using a lipid chelating agent, bis(stearylamide) of diethylenetriaminepentaacetic acid (L), to detect pancreatic tumors by gamma‐scintigraphy. Previous studies indicated that the difficulty of visualization of pancreatic tumors was due to their poor vascularization. This study compares the ability of two radiotracers, ¹¹¹In–L–LDL and ¹⁵³Gd–L–LDL to target highly vascularized rat pancreatic tumors (AR4‐2J) implanted in nude mice. Biodistribution studies showed that the tumor uptake of ¹¹¹In–L–LDL and ¹⁵³Gd–L–LDL tracers was twofold and fivefold higher respectively than with the controls (¹¹¹In citrate and ¹⁵³Gd citrate respectively). These tracers would thus be suitable for scintigraphic imaging. We show here that LDL could be employed as a delivery system for tracers such as ¹¹¹In or ¹⁵³Gd when these two radionuclides are complexed by a lipid‐chelating anchor, and that ¹¹¹In–L–LDL and ¹⁵³Gd–L–LDL enabled better visualization of the pancreatic tumor tissues, with a better result with ¹⁵³Gd–L–LDL. Copyright © 2004 John Wiley & Sons, Ltd.     

低k氟化非晶碳层间介质对芯片性能的影响

讨论了通过合理设计的工艺流程将低k氟化非晶碳材料应用到制造工艺中作为互连介质对集成电路性能的影响。基于一个互连结构简化模型计算出采用低k氟化非晶碳材料作为互连介质后RC延迟、功率耗散和线间串扰的变化情况。采用低k氟化非晶碳介质后,RC延迟和功率耗散随着互连长度的增大而减小,线间串扰也得到显著抑制。     

低速二维流动的粒子仿真研究

本文运用信息保存法对低速二维的流动现象进行模拟，考察了低速条件下的有限平板绕流以及微槽道气体流动问题。研究表明：在对低速流动的模拟过程中，运用IP法在能够获得较好的结果的同时，具有比DSMC方法更高的计算效率。     

Performance of noise barriers with various edge shapes and acoustical conditions

The performances of barriers having different shapes and surface conditions were tested using the boundary element method in a well-controlled environment. The heights and widths of the barriers were standardized and the insertion losses for six receiver positions were averaged and compared. Figures displaying the results allow for straightforward barrier performance estimation. It was shown that absorbing and soft edges significantly improve the efficiency of the barrier, but configuration modifications provide only a slight improvement. The soft T-shaped barrier produces the highest performance. A 3 m high T-shaped barrier provides the same performance as a 10 m high plain barrier. The spectral efficiency was also investigated. The insertion loss spectra for the absorbing and the soft barriers exhibit a similar shape, but the rigid barrier differs from these two.