奇偶相干态的Wehrl熵和Shannon熵

研究了奇、偶相干态的Ｗｅｈｒｌ熵和Ｓｈａｎｎｏｎ熵，结果表明，其Ｗｅｈｒｌ熵随总噪声的增加而增大，并趋向同一个常数。Ｓｈａｎｎｏｎ熵随力学量起伏的减小而减小，且这两种态的Ｓｈａｎｎｏｎ熵均可小于相干态的Ｓｈａｎｎｏｎ熵，但这时并不与压缩效应的出现相对应，因而Ｓｈａｎｎｏｎ熵不能成为压缩存在的判据。     

调制不稳定性对级联放大光纤传输系统信噪比的影响

在考虑光纤损耗和级联放大器的情况下，推导了调制不稳定性的产生条件和增益的普适解析表达式，分析了调制不稳定性对信噪比的影响，给出了一个新的计算信噪比的表达式。     

液态金属流的表面张力问题中的两点边值问题解的存在性

本文讨论了在区域提纯过程中，研究液态金属流的表面张力时提出的一个带有非负参数Ｑ的两点边值问题．利用上、下解方法和Ｓｃｈａｕｄｅｒ不动点定理，证明了当０Ｑ８５１时，该问题至少有一个解，对已有结果０Ｑ＜１进行了重要的改进．     

ZST微波陶瓷在介质振荡器上的应用研究

用传统固相法制备ZST(氧化锆-氧化锡-氧化钛)系微波陶瓷,研究了ZST系微波陶瓷的组成对介电性能的影响。通过X-射线衍射(XRD)和HP8714ET网络分析仪对其晶体结构和微波介电性能进行研究,实验结果表明:少量掺Bi2O3的ZST系陶瓷材料可把烧结温度降低至1 260℃,微波介电性能较好;掺入量大于2%(质量分数)时,ZST系微波陶瓷在晶界偏析形成了Bi2Ti2O7新相,微波性能下降。用微波介电性能较好的ZST系陶瓷制成的介质振荡器进行测试,其电性能满足设计要求。     

高帧速摄像器

本文介绍了高帧速摄像器的设计、制造、工作和性能。该高帧速有３６０×３６０像素、摄像速度高达５×１０５帧／秒，该摄像器读出电路类似于帧转移ＣＣＤ，由四部分组成     

A partial differential equation which describes an interatomic surface

In this work we present a first-order partial differential equationwhich defines the topology of single ‘atomic entities’in multiatomic systems. Such an equation, obtained by R. F.W. Bader, is here analysed and discussed from a general mathematicalpoint of view; a method is then proposed for defining the initialor boundary condition. With this contribution we would liketo promote and stimulate a more detailed analysis which goesbeyond practical purposes and basic mathematical analysis inorder to have a deeper understanding of the theory behind theequation and its consequences for practical applications.     

Flicker noise in degenerately doped Si single crystals near the metal-insulator transition

In this paper we report some of the important results of experimental investigations of the flicker noise near the metal-insulator (MI) transition in doped silicon single crystals. This is the first comprehensive work to study low-frequency noise in heavily doped Si over an extensive temperature range (2 K<T<500 K). The measurements of conductance fluctuations (flicker noise) were carried out in the frequency range 10⁻²<f<4 × 10¹ Hz in single crystalline Si across the MI transition by doping with phosphorous and boron. The magnitude of noise in heavily doped Si is much larger than that seen in lightly doped Si over the whole temperature range. The extensive temperature range covered allowed us to detect two distinct noise mechanisms. At low temperatures (T<100 K) universal conductance fluctuations (UCF) dominate and the spectral dependence of the noise is determined by dephasing the electron from defects with two-levels (TLS). At higher temperatures (T>200 K) the noise arises from activated defect dynamics. As the MI transition is approached, the 1/f spectral power, typical of the metallic regime, gets modified by the presence of discrete Lorentzians which arise from generation-recombination process which is the characteristic of a semiconductor.     

强噪声背景下确定性谐波信号的模糊滤波

文章提出了一种在强背景噪声环境下对被淹没的谐波信号进行模糊滤波，从而恢复微弱目标信号的方法。在MATLAB环境下，先利用相干平均法，除去被测信号中的随机白噪声，对于有色噪声运用自适应神经模糊推理系统（ANFIS）的方法，对被测信号进行模糊滤波，在较低信噪比下，能较好的恢复出原始微弱信号。     

Noise-induced asymptotic periodicity in a piecewise linear map

We examine asymptotically periodic density evolution in one-dimensional maps perturbed by noise, associating the macroscopic state of these dynamical systems with a phase space density. For asymptotically periodic systems density evolution becomes periodic in time, as do some macroscopic properties calculated from them. The general formalism of asymptotic periodicity is examined and used to calculate time correlations along trajectories of these maps as well as their limiting conditional entropy. The time correlation is shown to naturally decouple into periodic and stochastic components. Finally, asymptotic periodicity is studied in a noise-perturbed piecewise linear map, focusing on how the variation of noise amplitude can cause a transition from asymptotic periodicity to asymptotic stability in the density evolution of this system.     

Synthesis and characterization of novel perfluorinated polyimides with 3D‐controlled structures for photonic applications

We have designed and synthesized novel perfluorinated polyimides with 3D controlled structure. At first, we successfully developed the new synthetic routes to diamines with pendant bulky perfluorinated aromatic units in a multi‐step synthetic procedure. Novel perfluorinated polyimides were prepared in a two‐step reaction in N‐methyl‐2‐pyrrolidinone (NMP) solution: The first step was for the synthesis of polyamic acids (PAAs) and the second reaction was for the imidization of PAA. The polymer yield was over 89% and the inherent viscosity of PAAs was in the range of 0.24–0.36 dL/g. The thin films were prepared by spin‐coating the PAA solution in NMP onto various substrates such as a Si wafer or a KBr pellet, dried at 80 °C and further cured at 230 °C. The resultant polyimides are thermally stable over 400 °C. The refractive index and birefringence of the resultant polyimides are 1.5858–1.6452 and 0.01–0.005, respectively. The refractive index of polyimide decreases with increasing the fluorine content. The copolymerization and the ether linkages into the backbone reduce the birefringence of polyimides. Surprisingly, the pendant ether linkage is not a crucial factor in reducing the polyimide birefringence. Their birefringence is comparatively very low, compared with that of previous polyimides. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1326–1342, 2006