111In–L–LDL and 153Gd–L–LDL as radiotracers for detection of AR4‐2J rat pancreatic tumors

Pancreatic cancer has an extremely poor prognosis, due, in part, to lack of methods for early diagnosis. The present study was designed to evaluate the potential of labeling low‐density lipoprotein (LDL) with a radionuclide using a lipid chelating agent, bis(stearylamide) of diethylenetriaminepentaacetic acid (L), to detect pancreatic tumors by gamma‐scintigraphy. Previous studies indicated that the difficulty of visualization of pancreatic tumors was due to their poor vascularization. This study compares the ability of two radiotracers, ¹¹¹In–L–LDL and ¹⁵³Gd–L–LDL to target highly vascularized rat pancreatic tumors (AR4‐2J) implanted in nude mice. Biodistribution studies showed that the tumor uptake of ¹¹¹In–L–LDL and ¹⁵³Gd–L–LDL tracers was twofold and fivefold higher respectively than with the controls (¹¹¹In citrate and ¹⁵³Gd citrate respectively). These tracers would thus be suitable for scintigraphic imaging. We show here that LDL could be employed as a delivery system for tracers such as ¹¹¹In or ¹⁵³Gd when these two radionuclides are complexed by a lipid‐chelating anchor, and that ¹¹¹In–L–LDL and ¹⁵³Gd–L–LDL enabled better visualization of the pancreatic tumor tissues, with a better result with ¹⁵³Gd–L–LDL. Copyright © 2004 John Wiley & Sons, Ltd.     

低速二维流动的粒子仿真研究

本文运用信息保存法对低速二维的流动现象进行模拟，考察了低速条件下的有限平板绕流以及微槽道气体流动问题。研究表明：在对低速流动的模拟过程中，运用IP法在能够获得较好的结果的同时，具有比DSMC方法更高的计算效率。     

A partial differential equation which describes an interatomic surface

In this work we present a first-order partial differential equationwhich defines the topology of single ‘atomic entities’in multiatomic systems. Such an equation, obtained by R. F.W. Bader, is here analysed and discussed from a general mathematicalpoint of view; a method is then proposed for defining the initialor boundary condition. With this contribution we would liketo promote and stimulate a more detailed analysis which goesbeyond practical purposes and basic mathematical analysis inorder to have a deeper understanding of the theory behind theequation and its consequences for practical applications.     

Synthesis and characterization of novel perfluorinated polyimides with 3D‐controlled structures for photonic applications

We have designed and synthesized novel perfluorinated polyimides with 3D controlled structure. At first, we successfully developed the new synthetic routes to diamines with pendant bulky perfluorinated aromatic units in a multi‐step synthetic procedure. Novel perfluorinated polyimides were prepared in a two‐step reaction in N‐methyl‐2‐pyrrolidinone (NMP) solution: The first step was for the synthesis of polyamic acids (PAAs) and the second reaction was for the imidization of PAA. The polymer yield was over 89% and the inherent viscosity of PAAs was in the range of 0.24–0.36 dL/g. The thin films were prepared by spin‐coating the PAA solution in NMP onto various substrates such as a Si wafer or a KBr pellet, dried at 80 °C and further cured at 230 °C. The resultant polyimides are thermally stable over 400 °C. The refractive index and birefringence of the resultant polyimides are 1.5858–1.6452 and 0.01–0.005, respectively. The refractive index of polyimide decreases with increasing the fluorine content. The copolymerization and the ether linkages into the backbone reduce the birefringence of polyimides. Surprisingly, the pendant ether linkage is not a crucial factor in reducing the polyimide birefringence. Their birefringence is comparatively very low, compared with that of previous polyimides. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1326–1342, 2006     

地铁沿线建筑内噪声多维度感受影响机制

随着城市铁路系统的快速发展,铁路沿线建筑内人群对地铁运行产生噪声的抱怨逐渐增多,为控制室内地铁噪声对人群所产生的负面影响,有必要对地铁噪声产生的多维度负面情绪进行评估。采集了79名受试者对建筑内地铁噪声的多维度负面感受(压抑感,不舒适度和不满意度),基于偏最小二乘法分析了主客观影响因素对多维度负面感受的作用机制,并比较了多维度负面感受在反映地铁噪声影响上的差异。结果表明,多维度负面感受主要取决于主观响度和声学参数,活动干扰度、地铁噪声的敏感度、厌烦度和适应性的影响明显更弱;3个多维度负面感受中,相比于压抑感,不舒适度和不满意度受主观响度的影响轻微更显著,在相同的主观响度感受下,不满意度等级最高。 该文可以为地铁沿线建筑物内噪声负面感受的评价和改善提供参考。     

次级源和误差传感器布放对带弹性障板的充液直管声振复合有源控制的影响*

针对充液管路系统噪声有源控制问题,研究了次级源和误差传感器布放对带弹性障板的充液直管管路系统有源消声与有源消振复合控制效果的影响。基于声固耦合方法建立了带弹性障板的充液直管管路系统的有限元模型,在声激励下对比了次级声源布放对系统有源消声性能的影响,并在组合激励下分析了次级力源、次级声源和误差传感器布放对系统复合有源控制的影响。结果表明,非对称分布的次级声源容易激起管壁振动,进而带动障板振动,导致有源消声效果不佳;采用对称分布的次级声源可使低频段的降噪量提高10 dB以上。复合有源控制可进一步提升全频段的控制效果。通过增加振动误差传感器数量,可使绝大多数频点的降噪量提高1~20 dB不等。此外,在管壁上布放的两圈次级力源的间距小于管壁振动波长的1/4,且都不位于管壁振动节点附近时控制效果更好。     

遗传算法优化变分模态分解提取舰船辐射噪声特征线谱方法

特征线谱提取是舰船目标识别的一个重要研究环节,常采用传统的DEMON谱分析方法,处理过程中,一般对舰船噪声时域信号未予抑噪,低信噪比情况下,传统DEMON谱分析性能差。对此,提出一种采用遗传算法优化变分模态分解方法,用于分解舰船噪声原时域信号,获得抑制噪声后的舰船噪声重构信号,进而有效提取了舰船目标噪声幅度调制特征线谱。该方法首先采用遗传算法优化变分模态分解的两个关键输入参数(分解所取模态个数和惩罚因子),对变分模态分解得到的各阶固有模态分量加以判别,去除噪声主导分量,保留信号主导分量,使重构舰船噪声信号显著抑制了干扰噪声,然后对降噪后的重构信号进行频谱分析,获得目标噪声调制特征线谱。理论分析、仿真和实验数据处理结果表明,相比传统DEMON谱分析法,基于遗传算法优化变分模态分解的舰船噪声特征线谱提取方法具有更好的噪声抑制能力,所获取的舰船噪声幅度调制特征线谱信噪比明显高于传统DEMON方法,具有一定优势,前景良好。     

一种5.0~9.3 GHz低功耗宽带低噪声放大器设计

针对Wi-Fi 6、Wi-Fi 6E(5 GHz、6 GHz)的低功耗、宽带宽等无线局域网(WLAN)设备需求,基于65 nm CMOS工艺设计了一款两级低功耗宽带低噪声放大器(LNA)。电路第一级采用结合互补共源电路的共源共栅结构,通过电感峰化技术和负反馈技术的运用,提高输入跨导,降低噪声,并拓展带宽和提高增益平坦度。第二级在共漏极缓冲器基础上引入辅助放大结构、电感峰化技术,实现抵消第一级共源管的噪声并拓展带宽。电路采用提出的前向衬底自偏置技术,以降低电路对电源电压的依赖,整体电路实现两路电流复用,从而有效降低了功耗。仿真结果表明,在5~9.3 GHz频带内LNA的S21为17.8±0.1 dB,S11小于-9 dB、S22小于-11.9 dB,噪声系数小于1.34 dB。在0.8 V电压下整体电路功耗为5.3 mW。     

数字音频功放处理芯片设计与实现

介绍了一种数字音频功率放大器数字信号处理的基本原理与实现方法.对整个数字音频功放的数字信号处理器的设计进行了详细介绍,并通过Xilinx FPGA工具进行了验证,利用Synopsys工具进行了完整的电路设计、仿真和版图设计.流片采用Chartered 0.35μm工艺.     

基于激光器RIN抑制的宽带低噪声微波光传输技术

微波光子链路中的核心器件激光器、调制器、光电探测器均为有源器件,在微波信号的电光光电转换过程中会引入额外的噪声,导致微波信号的噪声性能恶化,高的噪声系数会降低电子信息系统的灵敏度、动态范围、探测精度等关键性能指标,因此抑制噪声成为实现高性能微波光子系统的关键。文章针对当前激光器噪声较高的限制,提出采用常规分布反馈(DFB)激光器与光放大器、窄带光子滤波相组合的方式来抑制激光源噪声,实现微波光子链路的宽带低噪声。建立了微波光子链路传输模型,分析了链路性能与器件参数之间的映射关系。实测对比了采用该组合光源方案与常规微波光子链路的噪声性能,结果表明采用高功率光源结合光滤波可对激光器远端相对强度噪声(RIN)实现高的抑制,通过优化,噪声系数较常规水平可改善15 dB以上。