Siliceous materials with the surface polymer layer composed of dextran-polyimine mixture as column packings for liquid chromatography

Summary Forming a polymer layer on the surface of siliceous materials is one of the methods for protecting the silica skeleton from dissolution in alkaline mobile phases as well as eliminating the negative influence of silanol groups on separated molecules e.g. proteins. Polysaccharides, especially their derivatives bearing amine groups, can play the role of the surface layer. This paper discusses the possibilities of preparing such a layer by cross-linking a dextran-polyimine mixture (rather than the traditionally used DEAE-dextran) deposited on the surface of the solid material. The results presented prove the utility of synthesized materials as supports for affinity ligands in high performance affinity chromatography or as supports for complexed metal ions in ligand-exchange chromatography. The properties of the sorbents with a polymer layer can be changed both by the composition of the cross-linked mixture and by chemical modification.     

High performance liquid chromatographic separation of dipeptide and tripeptide enantiomers using a chiral crown ether stationary phase

A chiral stationary phase (CSP) based on (-)-(18-crown-6)-2,3,11,12-tetracarboxylic acid was evaluated for the direct resolution of the enantiomers of dipeptides and tripeptides. The type and concentration of the acid and the methanol content were optimized with regard to retention time and resolution using Ala-Phe as model peptide. A mobile phase consisting of 10 mM sulfuric acid in 70% aqueous methanol was applied to the separation of a set of 16 structurally diverse dipeptides and tripeptides. Generally, the configuration of the amino acid at the N-terminus determined the enantiomer elution order. With a few exceptions the LL- and LD-enantiomers interacted stronger with the CSP compared to the corresponding DD- or DL-enantiomers. The experimental conditions also allowed the simultaneous separation of all four stereoisomers of Ala-Phe. Addition of ammonium sulfate generally reduced retention times and enantiomer resolution. Addition of triethylamine as modifier led to an overall increase of the retention times while the resolution did not show a general trend, increasing in the case of Ala-Ala but decreasing in the case of Ala-Phe.     

Liquid chromatographic enantiomer resolution of N-fluorenylmethoxycarbonyl alpha-amino acids and their ester derivatives on polysaccharide-derived chiral stationary phases

The liquid chromatographic enantiomer separation of N-fluorenylmethoxycarbonyl (FMOC) protected alpha-amino acids and their ethyl ester derivatives was performed on polysaccharide-derived chiral stationary phases, Chiralcel OD, Chiralpak AD, and Chiralpak AS. In general, Chiralcel OD and Chiralpak AD showed good performance for resolution of N-FMOC alpha-amino acids and their ethyl esters, respectively. All investigated N-FMOC alpha-amino acid enantiomers were baseline separated on Chiralcel OD or Chiralpak AD, whereas N-FMOC alpha-amino acid ethyl ester enantiomers were baseline resolved (alpha = 1.15-3.03) on Chiralpak AD, except for two analytes. The L-enantiomers of all examined FMOC alpha-amino acid ethyl ester derivatives are preferentially retained on Chiralpak AD, while the elution orders of the other enantiomer separations are not consistent.     

Direct optical resolution of the enantiomers of axially chiral compounds by high-performance liquid chromatography on cellulose tris-(3,5-dimethylphenylcarbamate) stationary phase

Summary The enantiomeric separation of nineteen biphenyl dimethyl dicarboxylate derivatives has been examined by HPLC on a chiral statonary phase prepared by coating aminopropylated silica gel with cellulose tris-(3,5-dimethylphenylcarbamate). It was found that trifluoroacetic acid (TFA) has a dominant effect on chiral separation for acidic compounds. The percentage of 2-propanol in the mobile phase does not have a large effect on the anantioselectivity but the separation was dramatically influenced by the kind of alcohol in the mobile phase. The effect of temperature on the chiral separation is also discussed. Most of the enantiomers investigated could be resolved satisfactorily.     

Preparation and enantiomer separation behavior of selectively methylated β-cyclodextrin-bonded stationary phases for high performance chromatography

Native and three selectively methylated β-cyclodextrin (β-CD)-bonded stationary phases without an unreacted spacer arm for liquid chromatography were prepared, where heptakis(2-O-methyl)-β-CD, heptakis(3-O-methyl)-β-CD and heptakis(2,3-di-O-methyl)-β-CD were used as the methylated β-CDs. The enantiomer separation abilities of the resulting β-CD stationary phases for 12 pairs of dansylamino acid enantiomers and six pairs of N-3,5-dinitrobenzoyl amino acid methyl esters as model solutes were investigated. The effects of pH and methanol content of the mobile phase on the retention and resolution were examined to optimize the mobile phase conditions. The optimum resolution for the dansylamino acids was achieved using a mobile phase consisting of 1.0% triethylammonium acetate buffer (pH 5.0)–methanol (v/v 4/6) on the β-CD stationary phase. Heptakis(3-O-methyl)- and heptakis(2,3-di-O-methyl)-β-CD-bonded stationary phases showed little enantiomer separation abilities for the dansylamino acids. The heptakis(2-O-methyl)-β-CD-bonded stationary phase exhibited no enantioselectivities for those solutes.

For the N-3,5-dinitrobenzoyl amino acid methyl esters, the optimum resolution was achieved using a mobile phase consisting of 1.0% triethylammonium acetate buffer (pH 5.0)–methanol (v/v 9/1) on a heptakis(2-O-methyl)-β-CD stationary phase. The heptakis(2,3-di-O-methyl)-β-CD-bonded stationary phases exhibited no enantioselectivities for the N-3,5-dinitrobenzoyl amino acid methyl esters. β-CD and heptakis(3-O-methyl)-β-CD-bonded stationary phases had no enantiomer separation abilities for those solutes except for the N-3,5-dinitrobenzoyl phenylalanine methyl ester.     

高效液相色谱手性固定相法拆分阿折地平对映体

建立了阿折地平对映体的高效液相色谱拆分方法。采用Chiralpak AD-H (250 mm×4.6 mm, 5.0 μm, Daicel公司)手性色谱柱在正相条件下直接拆分阿折地平对映体,考察了固定相种类、流动相组成及柱温等对阿折地平对映体分离的影响。确定了最佳的拆分条件: 流动相为正己烷-异丙醇(90:10, v/v),流速为0.8 mL/min,检测波长为254 nm;柱温为20 ℃;在此条件下阿折地平对映体的分离度为3.3。该法简单快速,重现性好。     

大黄酸键合硅胶固定相的简便制备及色谱性能评价

以大黄酸为原料,γ-氨丙基三乙氧基硅烷(KH-550)为偶联剂,简便制备了一种新型羧基键合硅胶固定相(RBSP),并用红外光谱、热重分析及元素分析对其结构进行表征.考察了流动相中甲醇含量对键合固定相色谱性能的影响,并以含酸性、中性和碱性化合物的混合物为溶质,评价了RBSP的色谱性能.以甲醇-水为流动相,用C18柱作参比,研究了该键合硅胶作为HPLC固定相对两种大豆异黄酮化合物和几种生物碱基的分离,并对其色谱分离机理进行了初步探讨.实验结果表明,该固定相(RBSP)具有较好的反相色谱性能,同时由于键合相中含有酚羟基及酰胺基团,能为多种溶质提供作用位点,对极性化合物的分离具有明显优势,且分离速度快,可有效用于极性化合物的分离分析.     

Use of a polar ionic liquid as second column for the comprehensive two-dimensional GC separation of PCBs

The orthogonality of three columns coupled in two series was studied for the congener specific comprehensive two-dimensional GC separation of polychlorinated biphenyls (PCBs). A non-polar capillary column coated with poly(5%-phenyl–95%-methyl)siloxane was used as the first (¹D) column in both series. A polar capillary column coated with 70% cyanopropyl-polysilphenylene-siloxane or a capillary column coated with the ionic liquid 1,12-di(tripropylphosphonium)dodecane bis(trifluoromethane-sulfonyl)imide were used as the second (²D) columns. Nine multi-congener standard PCB solutions containing subsets of all native 209 PCBs, a mixture of 209 PCBs as well as Aroclor 1242 and 1260 formulations were used to study the orthogonality of both column series. Retention times of the corresponding PCB congeners on ¹D and ²D columns were used to construct retention time dependences (apex plots) for assessing orthogonality of both columns coupled in series. For a visual assessment of the peak density of PCBs congeners on a retention plane, 2D images were compared. The degree of orthogonality of both column series was, along the visual assessment of distribution of PCBs on the retention plane, evaluated also by Pearson's correlation coefficient, which was found by correlation of retention times t_R,i,2D and t_R,i,1D of corresponding PCB congeners on both column series. It was demonstrated that the apolar + ionic liquid column series is almost orthogonal both for the 2D separation of PCBs present in Aroclor 1242 and 1260 formulations as well as for the separation of all of 209 PCBs. All toxic, dioxin-like PCBs, with the exception of PCB 118 that overlaps with PCB 106, were resolved by the apolar/ionic liquid series while on the apolar/polar column series three toxic PCBs overlapped (105 + 127, 81 + 148 and 118 + 106).     

Poly(divinylbenzene-alkyl methacrylate) monolithic stationary phases in capillary electrochromatography

In this study, a series of poly(divinylbenzene-alkyl methacrylate) monolithic stationary phases, which were prepared by single step in situ polymerization of divinylbenzene and various alkyl methacrylates (butyl-, octyl-, or lauryl-methacrylate), were developed as separation columns of benzophenone compounds for capillary electrochromatography (CEC). In addition to the presence of plenty of benzene moieties, the stationary phases contained long and flexible alkyl groups on the surface. With an increase in the molecular length of alkyl methacrylate, the polymeric monolith, which had higher hydrophobicity, effectively reduced the peak tailing of benzophenones, but a weaker retention was observed. The unusual phenomenon was likely due to the π–π interaction between the aromatic compound and the polymeric material. The usage of longer alkyl methacrylate as reaction monomer limited the retention of aromatic compounds on the stationary phase surface, thus the π–π interaction between them was possibly reduced. Consequently, the retention time of aromatic compounds was markedly decreased with an increase in carbon length of alkyl methacrylate that was carried on the polymeric monolith. Compared to previous reports on polystyrene-based columns in which the peak-tailing problem was reduced by decreasing the benzene moieties on the stationary phase, this study demonstrated that the undesirable retention (peak-tailing) could also be improved by the inclusion of long alkyl methacrylate to the polystyrene-based columns.     

Optimization of a high-performance liquid chromatography method for the analysis of complex polyphenol mixtures and application for sainfoin extracts (Onobrychis viciifolia)

A pentafluorophenylpropyl (PFP) stationary phase was tested for the simultaneous determination of several classes of phenolic compounds. The chromatographic results were compared with those obtained by using a bifunctional phase constituted of octadecyl and phenylpropyl bonded silica and three conventional C18 columns. The elution gradient was optimized with 5% formic acid and sodium acetate in combination with acetic acid as additives and methanol as solvents. For these evaluations, a complex phenolic extract of Onobrychis viciifolia (sainfoin) and test mixtures containing 54 standard substances including 2 simple phenolic compounds, 1 amino acid, 4 hydroxybenzoic acids (HBA), 6 hydroxycinnamic acids (HCA), 3 flavan-3-ols, 9 anthocyanins, 2 dihydroflavonols, 1 chalcone, 4 flavones, 1 isoflavone and 21 flavonols have been assayed. The perfluorinated column showed good resolution for the studied phenolic compounds which have the following elution order: HBA, HCA, flavan-3-ols, anthocyanins, dihydroflavonols, flavones, flavonols and isoflavones. Compared with other columns, it provides longer elution ranges for HBA, HCA and flavan-3-ols and increased retention times for all compound classes except anthocyanins which were similarly retained on a C18 column. Its selectivity is different from C18 and bifunctional phases. A high-performance liquid chromatography (HPLC) method with diode array detection (DAD) and post-column derivatization with p-dimethyl-aminocinnamic aldehyde (DMACA) has been validated for the analysis of individual phenolic compounds from a sainfoin plant extract (O. viciifolia).