Solid Phase Synthesis of 2-Substituted 1,3-Oxazin-6-ones Using Resin-bound Cyclic Malonic Acid Ester

A facile solid phase synthesis of 2-substituted 1,3-oxazin-6-ones using polymer-supported Meldrum‘s acid has been reported. Reaction of the resin-bound cyclic malonic acid ester with triethyl orthoformate and subsequent double substitution with amide, afforded the corresponding polymer-supported acylaminomethylene cyclic malonic acid ester, which upon thermal treatment led to 1, 3-oxazin-6-ones in good yields and with high purity.     

Solid phase synthesis of azapeptides using an automatic synthesizer

Peptides containing azaglycine located terminally or within the backbone have been prepared in the solid phase by means of an automatic synthesizer.     

四（对-羟基苯基）卟啉氧合配合物的室温固相合成，表征及氧合能力

采用固相反应合成了四羟基苯基卟啉与与Fe^2＋,Co^2＋金属离子的配合物,在室温下,将其与分子O2作用,提纯后得到两种固态氧合配合物．通过元素分析、红外光谱（IR）、核磁共振氢谱（^1HNMR）、电导、热分析（TG／DTA）、紫外光谱（UV）等测试手段确定了氧合配合物的组成为[Co·THPP·O2]（NO3）2·2H2O、[Fe·THPP·O2]Cl2·2H2O]，可知1mol配合物吸收了1molO2,采用失重法测定了氧合配合物中的配位氧,确定1mol金属配合物吸收1molO2形成超氧配合物．     

非晶硅薄膜的低温快速晶化及其结构分析

在镀铝的廉价玻璃衬底上高速沉积的非晶硅薄膜在不同的温度下退火10min.退火温度为500℃时,薄膜表面形成了硅铝的混合相,非晶硅薄膜开始呈现了晶化现象 退火温度为550℃时,大部分(约80%)的非晶硅晶化为多晶硅,平均晶粒尺寸为500nm 退火温度为600℃时,几乎所有的非晶硅都转化为多晶硅,其平均晶粒尺寸约为15μm.     

Effect of Hydrolysis Conditions on the Direct Formation of Nanoparticles of Ceria–Zirconia Solid Solutions from Acidic Aqueous Solutions

The effect of the cation concentration, hydrolysis temperature, and composition in the CeO₂–ZrO₂ system on the direct precipitation of ceria–zirconia solid solutions and the structure of the precipitates from acidic aqueous solutions of (NH₄)₂Ce(NO₃)₆ and ZrOCl₂ by hydrolysis under hydrothermal conditions were investigated. Nanometer-sized (8–10 nm) ceria–zirconia solid solution particles in a composition range of 0 to 60 mol% ZrO₂ were directly precipitated from the solutions with total metal cation concentration less than 0.2 mol/dm³ by simultaneous thermal hydrolysis at 150–240°C. The crystalline phase of the precipitates gradually changed from cubic and/or tetragonal to monoclinic with increasing the cation concentration of the solution from 0.2 to 0.8 mol/dm³ at the starting composition of 50 mol% ZrO₂ under hydrolysis condition of 150°C for 48 h, which was attributed to decrease in the supply of hydrolyzed Ce component caused by decrease in the hydrolysis ratio of (NH₄)₂Ce(NO₃)₆. Ceria–zirconia solid solutions containing large amount of ZrO₂ maintained high specific surface area and small-sized crystallite after heat-treatment at 900–1000°C for 1 h.     

固体中光声拉曼效应的理论分析

从非线性波动方程出发，运用准平衡模型以及热弹理论，对固体样品中光声拉曼效应进行理论分析，导出了脉冲激光泵浦下光声拉曼信号的解析表达式，并总结分析了固体中光声拉曼效应的一些原理特性、实验问题和应用价值。     

Solid codes and the uniform density of fd-domains

By means of further investigation of solid codes,the problem“Is every fd-domain uni- formly dense”proposed by Yuqi Guo,C.M.Reis and G.Thierrin in 1988 is solved in this paper.     

高峰值功率重频脉冲固体激光器

综述了高峰值功率重频脉冲固体激光器的发展现状，对其中的Ｑ开关、腔倒空、锁模等窄脉冲技术和放大技术进行了分析，展示了高峰值功率重频脉冲固体激光器的发展前景。     

激光晶体的新发展

本文根据最新资料对固体激光器所用激光晶体的近期发展作了详尽综述，并对我国应如何发展激光晶体研究提出建议。     

New developments in the field of piezothermal analysis

The solid transitions of C₂₁, C₂₃ and C₂₅ n-paraffins are examined from a piezothermal point of view. The paper is divided into two parts. The first is a report of the main features of a piezothermal analyzer when pressure scanning allows the continuous record of the expansivity as a function of pressure up to 5 Kilobars. Small samples are required and the scanning speeds vary from 0.3 to 16 Kilobars per hour. The second part describes the experimental procedure appropriate for solid state determinations. The resulting piezothermograms are presented and entropies of transformation are determined. A model allows a crude statistical approach giving the entropies of transformation with the correct order of magnitude. Problems related with phase transformations under a shearing stress are considered.

---

Zusammenfassung Feststoffumwandlungen bei C₂₁, C₂₃ und C₂₅ n-Paraffinen wurden unter dem Gesichtspunkt der Piezowärme untersucht. Im ersten Teil vorliegender Arbeit werden die Haupteigenschaften eines piezothermischen Analysators beschrieben, bei dem durch Druck-Scanning die kontinuierliche Aufzeichnung des Ausdehnungsvermögens als Punktion des Druckes bis zu 5 kbar ermöglicht wird. Es werden nur kleine Proben benötigt, die Scanning-Geschwindigkeit variiert zwischen 0,3 und 16 kbar/h. Der zweite Teil beschreibt das geeignete experimentelle Verfahren zur Feststoffzustandsbestimmung. Die erhaltenen Piezothermogramme werden dargestellt und die Entropien der Umwandlung bestimmt. Ein Modell liefert eine grobe statistische Näherung, die die Entropien der Umwandlung in der richtigen Grö\enordnung liefert. Probleme in Zusammenhang mit Phasenumwandlungen bei Scherbeanspruchungen werden betrachtet.