可调谐钛宝石双波长激光在β－BaB2O4晶体中和频

本文用矩阵光学推导出了相位共轭腔的热稳条件。     

远洋追踪记

本文记述１９８０年５月,我国首次试验向南太平洋发射洲际运载火箭,远望１号、２号等１８艘舰船开赴落区进行弹道测量及打捞数据舱的经过,并论述了这次试验及激光测距取得成功的重要意义。     

Some observations from interrupted lifetest of GaInAsP/InP inverted-rib laser diodes

Conventionally, lifetests of semiconductor laser diodes usually involved operating the devices continuously at either constant power output or drive current, with periodic recording of their characteristics. In this paper, some effects arising from interrupted lifetest of 1.3 m GaInAsP-InP inverted-rib laser diodes are reported. This unconventional lifetest method involves constant power biasing at 4 mW/facet and 8 mW/facet respectively at 50°C, followed by a period during which the lifetest is interrupted and the devices left unbiased at room temperature. Subsequently, the devices were put back on constant power biasing at 50°C. Among a number of parameters, pronounced reduction in the threshold current, current for 4 mW/facet and 8 mW/facet were observed, indicating strong recovery effects commencing from the time when the life-test was interrupted. Redistribution of mobile defects in the cladding layer is postulated to be the cause of the degradation recovery, and the data supports the occurrence of an aging-current dependent defect annihilation mechanism. Such recovery effects have so far been observed to occur only in the GaInAsP-InP inverted-rib devices.     

掺钕单模光纤激光器的调Q实验研究

采用连续运转Ar+激光器5145 Å输出波长光作为泵浦源,采取端泵浦的平凹光学谐振腔结构,用光学斩波器作为Q开关,建立了掺钕单模光纤激光器的调Q实验装置,对这种激光器的调Q特性进行了实验研究和讨论。     

平板宽波导激光器直流放电特性研究

研究了平板宽波导激光器的直流放电特性和放电区内的气体温度分布。实验和理论分析表明,在给定放电区内最大气体温升的情况下．放电区内所允许的最大注入功率与放电面积成正比,即在直流电激励下平板宽波导激光器具有功率“面积放大”功能。从而为中、大功率ＣＯ２激光器小型化研究提供了新的途径。     

飞秒激光在6H-SiC表面诱导偏振依赖纳米结构特性研究

激光诱导偏振依赖纳米结构是一种有效实现纳米图案化的技术,并且一直备受研究者的青睐。利用飞秒激光微加工技术,对6H-SiC晶体表面激光诱导偏振依赖纳米结构特性进行了研究。通过改变入射激光加工偏振态和延迟时间样品表面诱导产生了直径约为150 nm的球形纳米颗粒、椭圆形纳米颗粒和空间周期约为150 nm的高空间频率表面条纹结构。实验结果表明,入射激光偏振特性会直接影响诱导产生的微结构形貌,并且优先入射的飞秒激光对最终产生的表面微结构形貌有决定性作用。初步探讨了偏振依赖纳米结构形成的物理机制,表面等离激元(surface plasmon polariton, SPP)在表面微纳米结构的产生过程中扮演着重要角色,研究结果对激光诱导表面周期结构(laser-induced periodic surface structures, LIPSS)可控制备具有重要意义。     

Femtosecond Laser 4D Printing of Light-Driven Intelligent Micromachines

Intelligent micromachines that respond to external light stimuli have a broad range of potential applications, such as microbots, biomedicine, and adaptive optics. However, artificial light-driven intelligent micromachines with a low actuation threshold, rapid responsiveness, and designable and precise 3D transformation capability remain unachievable to date. Here, a single-material and one-step 4D printing strategy are proposed to enable the nanomanufacturing of agile and low-threshold light-driven 3D micromachines with programmable shape-morphing characteristics. The as-developed carbon nanotube-doped composite hydrogel simultaneously enhanced the light absorption, thermal conductivity, and mechanical modulus of the crosslinked network, thus significantly increasing the light sensitivity and response speed of micromachines. Moreover, the structural design and assembly of asymmetric microscale mechanical metamaterial unit cells enable the highly efficient additive nanomanufacturing of 3D shape-morphable micromachines with large dynamic modulation and spatiotemporal controllability. Using this strategy, the world's smallest artificial beating heart with programmable light-stimulus responsiveness for the cardiac cycle is successfully printed. This 4D printing method paves the way for the construction of multifunctional intelligent micromachines for bionics, drug delivery, integrated microsystems, and other fields.     

Recent Advances on High-Speed and Holographic Two-Photon Direct Laser Writing

Two-Photon Lithography, thanks to its very high sub-diffraction resolution, has become the lithographic technique par excellence in applications requiring small feature sizes and complex 3D pattering. Despite this, the fabrication times required for extended structures remain much longer than those of other competing techniques (UV mask lithography, nanoimprinting, etc.). Its low throughput prevents its wide adoption in industrial applications. To increase it, over the years different solutions have been proposed, although their usage is difficult to generalize and may be limited depending on the specific application. A promising strategy to further increase the throughput of Two-Photon Lithography, opening a concrete window for its adoption in industry, lies in its combination with holography approaches: in this way it is possible to generate dozens of foci from a single laser beam, thus parallelizing the fabrication of periodic structures, or to engineer the intensity distribution on the writing plane in a complex way, obtaining 3D microstructures with a single exposure. Here, the fundamental concepts behind high-speed Two-Photon Lithography and its combination with holography are discussed, and the literary production of recent years that exploits such techniques is reviewed, and contextualized according to the topic covered.     

基于偏振调节的太赫兹量子级联激光器双光梳研究

太赫兹量子级联激光器（THz QCL）双光梳在光谱检测、测距、成像等领域具有重要应用。双光梳信号严重依赖THz耦合光功率。利用THz QCL激射光为线偏振光的特性,在双光梳光路上插入线偏振片,通过旋转偏振片以达到对THz光强进行调节的作用。系统研究了THz QCL双光梳谱和功率与偏振角度的依赖关系,为实现高稳定THz双光梳光源与应用奠定基础。     

太赫兹自由电子激光放大器研究

太赫兹自由电子激光(FEL)是获得高功率太赫兹辐射的重要途径,目前运行的太赫兹FEL装置基本上都采用振荡器结构,若采用FEL放大器模式,则可产生具有更高峰值功率的太赫兹辐射。本文以北京大学超导电子直线加速器的束流参数为基础,通过模拟分析确定了太赫兹FEL放大器对太赫兹种子源、电子束流及波荡器等的要求。模拟结果显示,太赫兹种子的峰值功率在10 W以上即可实现太赫兹FEL放大;在较易实现的参数条件下,可获得峰值功率数兆瓦的太赫兹辐射。