85℃3000小时系列焊片式铝电解电容器的开发研究

该次试验的目的是为了开发出85℃3000小时这种新的系列的焊片式铝电解电容器。为此，对该系列选取了最小电压200V的小容量和大容量，及最大电压450V的小容量和大容量的产品分别进行了设计和开发。开发过程中对阳极箔，阴极箔，电解纸，电解液等原材料进行了分析比较，并将四种设计分别做成产品并测试最薄弱的环节85℃3000小时的纹波电流试验，结果表明该系列的设计能很好地满足电性能要求。     

Finding the buckling load of non-uniform columns using the iteration perturbation method

The aim of this study is to calculate the critical load of variable inertia columns. The example studied in this paper can be used as a paradigm for other non-uniform columns. The wavelength of equivalent vibratory system is used to calculate the critical load of the trigonometrically varied inertia column. In doing so, the equilibrium equation of the column is theoretically studied using the perturbation method. Accuracy of the calculated results is evaluated by comparing the solution with numerical results. Effect of improving the initial guess on the solution accuracy is investigated. Effects of varying parameters of the trigonometrically varied inertia and the uniformly tapered columns on their stability behavior are studied. Finally, using the so-called “perfectibility” parameter, two design goals, i.e., being lightweight and being strong, are studied for the discussed columns.     

校园计算网格作业自适应调度的研究和实现

由于网格资源具有分布、异构、动态、自治等特性。使得网格作业调度成为网格计算中具有挑战性的任务之一。针对校园高性能计算资源负载不均衡、管理模式不统一的问题，提出了校园计算网格自适应调度系统的解决方案。详细研究了网格作业的白适应调度技术，设计了含有负载均衡能力的资源动态信息收集模型，并给出自适应调度算法。实现了校园范围内高性能计算资源的负载均衡和统一的资源管理。     

在Delphi 7.0中使用DLL

介绍了在Delphi 7.0中DLL的基本概念和创建过程及调用方法。提出了如何将现有工程项目转化成DLL,如何用动态加载的方法进行引用。在调用DLL之后,可以使用单元的Initialization与Finalization对DLL初始化和关闭,也可以用系统预定义的两个过程ExitProc或DLLProc调用DLL,由他们处理DLL的初始化和善后。对使用过程中可能出现的错误和例外情况作了详细的分析。最后指出DLL中需以某种特定的方式声明导出函数、变量和类,应用工程需以某种特定的方式调用DLL的导出函数、变量或类。     

变频调速应用技术（十一）——第六讲经济效益赞变频（上）

本文分析了节能问题的几个方面。主要有：负载需求与节能的关系，调速方法与节能的关系，以及大马拉小车的节能问题等。     

W/Cu梯度功能材料的高热负荷性能研究

用等离子体喷涂和热压方法制作了W/Cu梯度功能材料(FGM)样品,用大功率ND∶YAG激光对其进行了高热负载模拟实验.结果表明,在100～400MW@m-2的瞬时(脉冲宽度为4ms)热负载下,经过200～700次热循环,未发现有W-Cu复合体开裂.在123MW@m-2的功率密度下作用700次,发现钨表面有再结晶现象及严重的晶界腐蚀和裂纹,再结晶的平均晶粒尺寸约为5～10μm,垂直于表面呈柱状结构,再结晶层厚度约20～30μm.由于激光的淬冷效应,晶粒生长的趋势并不明显.在398MW@m-2功率密度下出现了明显的腐蚀坑,坑内呈疏松的蜂窝结构,坑的边缘出现了明显沉积区,能谱分析表明沉积区集聚了大量的金属杂质.等离子体喷涂试样比热压试样更易产生晶界的断裂的裂纹.在相同的热负荷条件下,W/Cu FGM的重量损失低于石墨材料的重量损失.     

Optimum load scheduling of nuclear-hydro-thermal power systems

This paper considers the problem of short-term optimal operation of nuclear-hydro-thermal electric power systems. The solution is obtained by use of a functional analytic optimization technique that employs the minimum norm formulation.A power system with an arbitrary number of generating stations is considered. The limited flexibility exhibited by the thermal nuclear reactors, when operating in a load-following mode, is accounted for by means of a model of the xenon concentration in their cores. The nonlinear effects induced by trapezoidal water reservoirs and the time delay of the water flow between upstream and downstream hydroplants is taken into consideration as well.A two-level iterative scheme of the feasible type is proposed for implementing the optimal solution.This work was supported in part by the National Research Council of Canada, Grant No. A-4146.     

Dynamic stability of a curved rail under a moving load

The stability of a curved rail under a constant moving load has been investigated using a linear theory; critical speeds of the moving load, and the dynamic rail deflections and rotation were calculated. The effect of the foundation was included through distributed linear springs. It was assumed that the moving load remains in constant contact with the rail and travels along a fixed path on the rail head.     

Dynamic Behavior of Rigid–Plastic Sector Plates

The paper studies the dynamic behavior of perfect rigid-plastic plates in the form of a sector with hinged or clamped sides under short-term intensive loads. Two dynamic deformation mechanisms are demonstrated. The dynamic equation is derived for each of the mechanisms. The realization conditions for the mechanisms are analyzed. Analytical expressions are derived for the ultimate (high) loads and the maximum residual deflection. Numerical examples are given     

A MIP approach for some practical packing problems: Balancing constraints and tetris-like items

This paper considers packing problems with balancing conditions and items consisting of clusters of parallelepipeds (mutually orthogonal, i.e. tetris-like items). This issue is quite frequent in space engineering and a real-world application deals with the Automated Transfer Vehicle project (funded by the European Space Agency), at present under development. A Mixed Integer Programming (MIP) approach is proposed. The three-dimensional single bin packing problem is considered. It consists of orthogonally placing, with possibility of rotation, the maximum number of parallelepipeds into a given parallelepiped. A MIP formulation of the problem is reported together with a MIP-based heuristic approach. Balancing conditions are furthermore examined, as well as the orthogonal placement (with rotation) of tetris-like items into a rectangular domain.Received: September 2003, Revised: February 2004, AMS classification: 90B99, 05B40, 90C90, 90C59Thanks are due to T. A. Ciriani for the important suggestions given for the whole paper and to S. Gliozzi (IBM, Business Consulting Services) for the significant support offered, in particular in discussing the topics presented in Sect. 2.1.