Defect Engineering and Anisotropic Modulation of Ionic Transport in Perovskite Solid Electrolyte LixLa(1−x)/3NbO3

Solid electrolytes, such as perovskite Li_3xLa_2/1−xTiO₃, Li_xLa_(1−x)/3NbO₃ and garnet Li₇La₃Zr₂O₁₂ ceramic oxides, have attracted extensive attention in lithium-ion battery research due to their good chemical stability and the improvability of their ionic conductivity with great potential in solid electrolyte battery applications. These solid oxides eliminate safety issues and cycling instability, which are common challenges in the current commercial lithium-ion batteries based on organic liquid electrolytes. However, in practical applications, structural disorders such as point defects and grain boundaries play a dominating role in the ionic transport of these solid electrolytes, where defect engineering to tailor or improve the ionic conductive property is still seldom reported. Here, we demonstrate a defect engineering approach to alter the ionic conductive channels in Li_xLa_(1−x)/3NbO₃ (x = 0.1~0.13) electrolytes based on the rearrangements of La sites through a quenching process. The changes in the occupancy and interstitial defects of La ions lead to anisotropic modulation of ionic conductivity with the increase in quenching temperatures. Our trial in this work on the defect engineering of quenched electrolytes will offer opportunities to optimize ionic conductivity and benefit the solid electrolyte battery applications.     

Synthesis of multi-1,10-phenanthroline ligands with 1,3-phenylene linkers and their lithium complexes

The synthesis of two multisite ligands containing four and five 1,10-phenanthroline (phen) chelates in line, respectively, is presented. The connectors are 1,3-phenylene linkers. The two ligands were prepared following multistep procedures, the two key reactions being the Suzuki coupling reaction between aromatic nuclei and the nucleophilic addition of aryllithium derivatives onto a phen fragment. The coordination chemistry of both ligands with Li+ ions was very clean and selective, whereas their reaction with copper(I) led to intractable mixtures of insoluble complexes. The tetraphen and the pentaphen compounds afforded almost quantitatively the four- and five-lithium double-stranded helical complexes, respectively. The helical systems are probably highly wound, as indicated by NMR measurements. The pronounced strain of the 5-Li+ complex is reflected by the easy loss of a lithium cation, as shown by electrospray mass spectrometry.     

Estimating Depth of Discharge of Lithium-Thionyl Chloride Batteries from Their Impedance Characteristics

The depth of discharge of lithium-thionyl chloride batteries is estimated from their impedance characteristics. It is shown that, in principle, it can be determined when using as an informative parameter indicating the phase value at the extreme point in impedance spectra of lithium batteries.     

Raman and Infrared Spectroscopic Characterization of the Phosphate Mineral Lithiophilite—LiMnPO4

Abstract

The metal lithium is very important in industry, including lithium batteries. An important source of lithium besides continental brines is granitic pegmatites as in Australia. Lithiophilite is a lithium and manganese phosphate with chemical formula LiMnPO₄ and forms a solid solution with triphylite, its Fe analog, and belongs to the triphylite group that includes karenwebberite, natrophilite, and sicklerite. The mineral lithiophilite was characterized by chemical analysis and spectroscopic techniques. The chemical is: Li_1.01(Mn_0.60, Fe_0.41, Mg_0.01, Ca_0.01)(PO₄)_0.99 and corresponds to an intermediate member of the triphylite-lithiophilite series, with predominance of the lithiophilite member. The mineral lithiophilite is readily characterized by Raman and infrared spectroscopy.     

Li-S电池硫正极性能衰减机理分析及研究现状概述

由于汽车工业的持续发展, 对高能量密度二次电池的需求逐步增加, 锂硫电池开始走进人们的视野. 锂硫电池的理论比能量高达2600 Wh/kg, 而单质硫的理论比容量达1680 mAh/g. 同时, 硫的储量丰富, 廉价, 并且环境友好. 虽然可充电锂硫电池相比于传统锂离子电池有诸多优势, 但目前其可实现的实际比容量远低于理论比容量, 循环寿命也较短等弊端限制了其大规模应用. 作者从Li-S电池正极的工作原理出发, 对硫正极容量损失及衰减机理做了深刻的解析, 并结合本实验室的工作归纳总结了导致硫正极容量衰减的主要因素. 针对硫正极容量衰减因素, 从碳导电结构、聚合物包覆以及纳米金属氧化物添加剂等方面, 对近年来提高硫正极性能的主要研究方向及最新研究进展进行了综述, 并对其中存在的问题进行分析, 最后对提高Li-S电池的整体性能提出展望.     

Effect of Precursor Drying Process on the Properties of LiFePO4/C Composite with Low Carbon Content

<正>Properties of two LiFePO_4/C composites with low carbon content synthesized from precursors dried by spray drying and blast drying are investigated by scanning electron microscopy, X-ray diffraction, Raman spectroscopy and electrochemical measurements. The two samples have a different morphology and particle size, while the structure of LiFePO_4 is unaffected. The LiFePO_4/C composite prepared from the precursor dried by blast drying has a much lower surface resistance and a much better rate capability because the deposited carbon is more graphite-like and more conductive. The cycling performance is also much better for the LiFePO_4/C composite prepared from the precursor dried by blast drying because only a slight impedance growth is involved upon cycling. These results suggest that the precursor drying process has a significant impact on the properties of LiFePO_4/C composite, and its effect is highly dependent on the carbon content.     

石墨烯包覆碳纳米管-硫(CNT-S)复合材料及锂硫电池性能

针对锂硫电池研究与实际应用中遇到的主要问题, 本文通过一种简单有效的水热法还原氧化石墨烯对商用碳纳米管-硫(CNT-S)纳米复合材料进行包覆, 形成一种可有效抑制多硫聚合物扩散的石墨烯包覆结构。X射线衍射(XRD), 扫描电子显微镜(SEM)表征结果表明硫均匀地负载在碳纳米管上, 并且在CNT-S复合材料外表面包覆有一层石墨烯。电化学测试结果表明, 这种包覆结构能显著提高CNT-S复合材料的锂硫电池性能。     

石墨烯/硫酸铅复合材料的制备及其在铅酸电池中的电化学性能

利用简单的浸渍法制备了石墨烯/硫酸铅复合材料,使得硫酸铅可以直接用作铅酸电池负极材料。该复合材料分别以100 mA·g^-1、200 mA·g^-1和300 mA·g^-1电流密度放电时,平均放电比容量分别可达到110、94和69 mAh·g^-1,而硫酸铅仅为49、5和0.5 mAh·g^-1,显示出复合材料在高倍率充放电下更好的比容量和再接受充电能力。循环伏安测试表明石墨烯的电容效应随扫描速率增大而增强,同时析氢也变得严重,使得复合材料在充放电过程中充电效率比纯硫酸铅低20%。在充放电过程中,石墨烯能够提高硫酸铅1倍以上的放电容量,并将充电电压提高0.1 V。XRD和SEM结果显示硫酸铅均匀分布在石墨烯片层上,没有出现团聚现象。     

锂参与合成MOF-5用于CO2/CH4混合气体分离

利用溶剂热法合成了不同锂含量的MOF-5(xLi-MOF-5, x=0, 1, 3, 5).在MOF-5结晶过程中,锂离子被合并入其骨架结构中.实验表明,合并入骨架的锂能够改变MOF-5的结构和表面化学性质.不同的xLi-MOF-5能够不同程度降低骨架相互穿插的程度从而导致其吸附分离能力的大幅改变.其中,3Li-MOF-5具有最高的二氧化碳捕获能力(5.47 mmol·g^-1),对40% CO₂/60% CH₄混合气体具有最优吸附选择性.     

MoO42-取代对Nasicon型Li3Fe2(PO4)3正极材料电化学性能的影响

以MoO₄^2-部分取代Li₃Fe₂（PO₄）₃中的PO₄^3-,研究表明：加入的MoO₄^2-离子主要以固溶形式存在于Li₃Fe₂（PO₄）₃中,起到了显著改善其电化学性能的作用。其中,MoO₄^2-掺杂浓度为0.3的样品表现出最佳的电化学性能,其在0.5C倍率下的首次放电容量为113.7 mAh·g^-1,这一数值比未掺杂的提高了20.7%;经过60次循环充放电,容量保持率为94%。将放电倍率从0.5C逐步增大至5C,再降至初始的0.5C,并在每个倍率循环10次,这一材料的最终放电容量可达首次0.5C的95%。这些优异的性能应归因于MoO₄^2-掺杂使材料的氧化还原能力增强,氧化还原电对的电势差减小,电池内部的电荷转移电阻减小,以及Li⁺扩散系数增加。