铌酸锂晶体性能的组成依赖性(英文)

总结了铌酸锂晶体的各项性能指标,显示了其对晶体实际组成的强烈依赖性.利用化学键模型定量地解释了这种依赖性产生的根源,从而说明了制约该晶体性能提高的关键因素是晶体结构中的缺陷控制.     

Synthese und Struktur von Li3RhH6, einem ternären Hydrid mit isolierten [RhH6]3−-Oktaedern

Synthesis and Structure of Li₃RhH₆ — a Ternary Hydride with Isolated [RhH₆]^3? Octahedra The ternary rhodium hydride Li₃RhH₆ was synthesized by the reaction of lithium hydride with rhodium under a hydrogen pressure of 80 bar. X-ray investigations on powdered samples and an elastic neutron diffraction experiment on the deuterated compound led to the complete structure determination (space group: Pnma, Z = 4). The atomic arrangement is isotypic to the Na₃RhH₆ structure type. The crystal structure contains isolated [RhH₆]^3? octahedra, which are separated by the lithium ions.     

A DFT study of lithium battery materials: application to the β-VOXO4 systems (X=P, As, S)

VOXO₄ systems have been considered as potential lithium battery electrodes. They mainly present two distinct structural types: the tetragonal “α” type with a two-dimensional framework, and the three-dimensional orthorhombic “β”. DFT calculations were performed on this latter system for several β-Li_xVOXO₄ compounds (x=0, 1; X=P, As, S). They allowed to propose structural models for VOAsO₄ and LiVOSO₄, not fully crystallographically well described yet. Based on an experimental model of two-phase processes, these calculations led also to a good simulation of electrochemical potential values. A density of states analysis put in evidence the “inductive effect” and the role played by (XO₄)ⁿ⁻ groups inside the host frameworks on these potentials.     

The non-isothermal devitrification of lithium germanate glasses

The non-isothermal devitrification of lithium germanate glasses, examined by DTA and XRD, is reported and discussed. The glass compositions are expressed by the general formula:xLi₂O(1?x)GeO₂ withx=0.050, 0.125, 0.167, 0.200 and 0.250. All the glasses studied, unlike GeO₂ glass, exhibit internal crystal nucleation without the addition of any nucleating agent. The devitrification processes occur in one or more steps. Phases which crystallized at each step are identified and crystallization mechanisms proposed. These crystallization mechanisms are related to structures of the crystallizing phases. Activation energy values as well as those for glass transition temperatures, do not vary linearly with increase in Li₂O content but pass through a maximum atx=0.200.     

PVC DISULFIDE AS CATHODE MATERIALS FOR SECONDARY LITHIUM BATTERIES

PVC disulfide (2SPVC) was synthesized by solution crosslink and its molecular structure was confirmed by infrared spectrum. 2SPVC's specific area is 36.1 m2·g-1 tested by stand BET method, and granularity experiment gives out the particle size of d0.5= 11.3μm. With SEM (Scanning Electron Microscope) experiment the surface morphology and particle shape of 2SPVC were observed. Cyclic voltammetry (scan rate: 0.5 mV·s-1) shows that 2SPVC experience an obvious S-S redox reaction in charge-discharge process. When 2SPVC was used as cathode material for secondary lithium battery in a 1 mol·L-1 solution of lithium bis(trifluoromethylsulfonyl) imide (Li(CF3SO2)2N) in a 5:45:50 volume ratio mixture of o-xylene (oxy), diglyme (DG) and dimethoxymethane (DME) at 30℃, the first discharge capacity of 2SPVC is about 400.3 mAh·g-1 which is very close to its theoretical value (410.5 mAh·g-1) at a constant discharge current of 15 mA·g-1. It can retain at about 346.1 mAh·g-1 of discharge capacity after 30 charge-discharge cycles. So 2SPVC is a very promising cathode candidate for rechargeable lithium batteries.     

聚1-氨基蒽醌在二次锂电池正极材料中的应用

采用化学方法合成聚1-氨基蒽醌并用于二次锂电池正极材料,通过红外光谱、扫描电镜、粒度测试、循环伏安以及充放电测试等方法对材料的官能团结构、微观形貌、颗粒大小以及电化学性能等进行了研究与分析.实验表明,与金属锂组成二次锂电池后,聚1-氨基蒽醌达到了218.3 mAh•g－1的首次放电容量,经过25次循环后仍可保持较高的充放电效率.由于材料具有较高的能量密度且不含对环境有污染的元素S,因此是二次锂电池非常有希望的正极材料.     

高温固相法合成LiNi1/3Mn1/3Co1/3O2及其性能研究

采用高温固相法合成出层状锂离子电池正极材料LiNi_1/3Mn_1/3Co_1/3O₂。通过XRD、ICP、SEM和电化学测试手段对产物的结构、组成、形貌及电化学性能进行了研究。XRD结果表明此方法合成的LiNi_1/3Mn_1/3Co_1/3O₂具有标准的α-NaFeO₂型层状结构，SEM照片显示颗粒粒径大约在500 nm左右，粒径分布较窄。以20 mA·g^-1电流密度放电，充放电电压在2.8～4.4 V之间，其首次放电比容量为170 mAh·g^-1，40次循环容量保持率为85.3%。进一步加入石墨导电剂后，同样条件下首次放电比容量变为179 mAh·g^-1，50次循环容量保持率为89.6%。容量衰减主要发生在前10次循环。XRD和SEM测试表明循环初期容量衰减的原因是由材料本体结构变化和界面反应共同作用的结果。     

利用湿法反应制备的LiV3O8的锂离子扩散特性

利用V2O5•nH2O湿凝胶和Li2CO3作原料,通过溶液反应和低温焙烧的方法合成了用于锂离子电池正极的LiV3O8.对其前驱体和产品分别进行DTA-TG、XRD表征.LiV3O8用作锂离子电池正极的电化学性能利用恒电流充放电测试进行研究.实验表明活性材料LiV3O8具有较高的充放容量和良好的循环性能.LiV3O8电极的锂离子化学扩散系数由恒电位间歇滴定技术(PITT)来确定，其值依据Li1＋xV3O8中x值的不同在10－8～10－10 cm2•s－1的变化范围内.获得的锂离子的扩散活化能为：Ea=25～42 kJ•mol－1(x=0.18～2.5).认为锂离子扩散的最大活化能是由锂离子在Li4V3O8相中的扩散决定的.     

Impact Responses of Prismatic Lithium-Ion Battery Based on the Membrane Factor Method北大核心CSCD

Aimed at the internal short circuit problem due to large deformation of the prismatic lithium-ion battery cell under impact loadings, a simplified battery model was first established. Then the motion equations of velocity and displacement based on the membrane factor method were proposed. With the effects of the face-sheet thickness and the densification region on the normalized final deflection, impact response characteristics of prismatic battery cells were investigated in detail. The results show that, the improved motion equations involving the membrane factor can reflect the dynamic response mechanisms of the prismatic battery cell under impact loadings, and the large deflection under high-speed impact can be predicted. With the increase of the face-sheet thickness, the deflection of the battery cell’s lower part decreases obviously. However, the densification region expands with the face-sheet thickness. The deflection and the densification region of the cell’s lower part both increase with the inner core density of the battery. This proposed impact model provides a theoretical guidance for the multi-functional integrated dynamic design of prismatic battery cells. © 2022 Editorial Office of Applied Mathematics and Mechanics. All rights reserved.     

Critical Review of Fluorinated Electrolytes for High-Performance Lithium Metal Batteries

Lithium metal batteries (LMBs), due to their ultra-high energy density, are attracting tremendous attentions. However, their commercial application is severely impeded by poor safety and unsatisfactory cycling stability, which are induced by lithium dendrites, side reactions, and inferior anodic stability. Electrolytes, as the indispensable and necessary components in lithium metal batteries, play a crucial role in regulating the electrochemical performance of LMBs. Recently, the fluorinated electrolytes are widely investigated in high-performance LMBs. Thus, the design strategies of fluorinated electrolytes are thoroughly summarized, including fluorinated salts, fluorinated solvents, and fluorinated additives in LMBs, and insights of the fluorinated components in suppressing lithium dendrites, improving anodic stability and cycling stability. Finally, an outlook with several design strategies and challenges will be proposed for novel fluorinated electrolytes.