一种新型的二元光学器件——多位相光束分束器的制作

本文报道了用于多光束分束器的反射式16位相值二元光学器件的制作。该二元光学器件把一束光束分成5×5光束阵列。测量的衍射效率为76.16%,接近理论设计值79.68%。该二元光学器件的有效孔径为10mm×10mm。     

G.652光纤长途传输系统的色散补偿

针对当前国内长途传输光缆系统在扩容过程中，因光信号色散而影响传输质量的现象，结合实际工程建设，分析了光信号色散的危害及其成因，并提出了相应的解决办法及建议。     

Transmission Fiber Chromatic Dispersion Dependence on Temperature: Implications on 40 Gb/s Performance

In this letter, we will evaluate the performance degradation of a 40 km high‐speed (40 Gb/s) optical system, induced by optical fiber variations of the chromatic dispersion induced by temperature changes. The chromatic dispersion temperature sensitivity will be estimated based on the signal quality parameters.     

Finite element modal solutions of planar photonic crystal fibers with rectangular air-holes

Modal solutions of planar photonic crystal waveguides with rectangular air-holes are presented by using a rigorous full-vectorial finite element-based approach. The effective indices, mode field profiles, spot-sizes, power confinements, modal hybridness, beat lengths and group velocity dispersions are shown for the fundamental and higher order modes of the quasi-TE and TM polarizations.     

Advanced modulation formats for more robust optical transmission systems

Interest in advanced modulation formats for optical communication systems has so far experienced two major waves. The first one was motivated by the potential to enhance receiver sensitivity of thermal noise-limited systems using coherent detection in combination with phase shift keying. It ended with the advent of optical amplification, enabling high sensitivities together with polarization insensitive, simple and stable direct detection. The second wave is still rolling, fueled by the potential of advanced modulation formats to increase robustness of optical transmission systems against signal distortions. Due to performance limitations given by direct detection and nonlinear effects in the transmission fiber, it is not decided yet, whether there will be widespread application in carrier networks.     

Enhanced Image Detection on an ARM based Embedded System

This paper presents a new technique for thedetection of Integrated Circuits within images of Printed Circuit Boards autonomouslyand without the need to be assisted by CAD data. The technique is a key partof a suite of algorithms targeted for an embedded System On Chip architecturebased on the ARM7 platform for real time detection of PCB images for diagnosticpurposes. The technique has a significant reduction in complexity when comparedto conventional approaches such as the Hough Transform. The reduction in complexitymakes the approach ideal for an embedded vision application suchas the one described in this paper. This paper presents the technique, thetarget embedded architecture and results showing the reduction in complexitywhen compared to a Hough Transform.     

用于光控相控阵雷达的空间光调制器

空间光调制器是光信息处理机的基本结构单元,它能根据电驱动信号或光驱动信号,随时修正与空间和时间有关的读出光束的偏振、相位和幅度.介绍了适用于光控相控阵雷达系统的空间光调制器,包括它们的结构、原理和性能.     

光波分复用技术及其应用

分析了波分复用系统的组成原理和几种分类方式,最后给出了一些基本应用形式。     

An experimental study of dynamic tensile properties of glass fiber at low-temperatures

Tensile impact experiments of EC8.0−24×7 glass fiber bundles at different low temperaturesT(14°C, −40°C and −10°C) and strain rates ɛ were carried out, and complete stress-strain curves were obtained. Within the range of the experiment temperatures and strain rates, it is found that the initial modulusE, the ultimate strength σ_max and the unstable strain ɛ _b of the glass fiber bundles all increase with ɛ at an identicalT. At an identical ɛ, with the decrease ofT, E and σ_max increase; but ɛ _b increases when 10°C>T>−40°C and decreases when −40°C>T>−100°C. The strain-rate- and temperature-dependent bimodal Weibull statistical constitutive theory was adopted for the statistical analysis of the experimental results, and the Weibull parameters of single fiber were obtained. The results show that the bimodal Weibull distribution function is suitable to represent the strength distribution of the glass fiber at low temperature and different strain rates. The differences in the mechanical properties between EC8.0−24×7 and EC5.5−12 ×14 glass fiber bundles were also discussed. Project supported by the National Natural Science Foundation of China (No. 19772058).     

光纤放大器增益饱和对有源光纤环形腔滤波特性的影响

从理论和实验两个方面研究了有源光纤环形腔滤波器输入光功率对光纤放大器增益的影响及由此引起的对有源光纤环形腔滤波特性的影响。在考虑上述影响的情况下 ,对有源光纤环形腔滤波器参数的优化作了讨论