基于西门子楼宇自控系统的中央空调计费系统

介绍了基于西门子楼宇自控系统的空调计费系统的软硬件设计和具体实现.该系统的特点是借助西门子S600系统强大的数据处理和控制能力,采用时间记录和能量测量相结合的方法进行计费,具有实时监测和定时输出报表功能.该系统计量准确、计费合理、安全可靠、性价比高,满足了现代物业管理的需要.     

基于DMF捕获系统频率选择性信道下捕获性能的分析

对基于数字匹配滤波器(DMF)捕获系统在频率选择性信道下的捕获性能进行了深入讨论，利用状态转移图推导出单次驻留判决方式时平均捕获时间的表达式，对平均捕获时间与多径分量的关系进行了数字分析。得出的主要结论是：对于多径分量为非衰落信号时，多径分量之间的能量差别越大，系统捕获性能越好，多径分量的能量相等时，系统捕获性能最差，且随着可以分离的多径路数的增加下降；对于多径分量为慢衰落信号时，多径信道的捕获性能好于单径信道(非频率选择性衰落信道)，且多径分量之间的能量差别越大，系统捕获性能越差，当多径分量的能量相等时，捕获性能最好，这与非衰落信道的情形相反。因此在频率选择性衰落信道中，采用分集接收可以改善系统的捕获性能。     

资源有限的加权总完工时间单机排序问题

本讨论资源有限的加权总工时间单机排序问题，对现在仍为OPEN问题1｜pj=bj-ajuj，∑uj≤U｜∑wjCj给出了一个有关最优解中最优资源分配的重要性质，并利用该性质分别给出了三种情况bj=b,wj=w,aj=a；bj=b,wj=w,uj=u；aj=a,wj=w,uj=u的最优算法。     

多重休假的带启动--关闭期的Geom/G/1排队

本研究多重休假的带启动——关闭期的Geom／G／1离散时间排队，给出稳态队长，等待时间分布的母函数及其随机分解结果，推导出忙期的全假期的母函数，给出该模型的几个特例。     

Survivability in IP-over-WDM Networks: WDM Lightpath Protection versus IP LSP Protection

This article compares the performance of WDM lightpath protection and IP LSP protection schemes for IP-over-WDM networks. A mathematical formulation of the maximum throughput problem is presented and analytical expressions for recovery time are derived for both schemes. The throughputs and recovery times are analyzed and compared. Results show that the IP LSP protection scheme presents higher throughputs then WDM lightpath protection. The IP LSP protection scheme, providing individual IP LSP protection has, however, scalability problems. This scheme presents high recovery times when a failure affects many lightpaths and many hops are allowed for the primary routes of IP LSPs.     

Bounds to optimal burn‐in and optimal work size

Burn‐in is a widely used method to improve the quality of products or systems after they have been produced. In this paper, we consider the problem of determining the optimal burn‐in time and optimal work size maximizing the long‐run average amount of work saved per time unit in the computer applications. Assuming that the underlying lifetime distribution of the computer has an initially decreasing or/and eventually increasing failure rate function, an upper bound for the optimal burn‐in time is derived for each fixed work size and a uniform (with respect to the burn‐in time) upper bound for the optimal work size is also obtained. Furthermore, it is shown that a non‐trivial lower bound for the optimal burn‐in time can be derived if the underlying lifetime distribution has a large initial failure rate. Copyright © 2005 John Wiley & Sons, Ltd.     

用于强磁场的快响应真空规的研制进展

研制了能在强磁场、强干扰环境下工作的快响应真空电离规(快规),用于对HL 2A装置偏滤器室和等离子体附近的中性粒子密度和通量进行原位测量。介绍了快规的结构、工作原理、设计要点以及实验结果。在无磁场的情况下,快规对气体压强的测量范围为6.4×10-6～0.15Pa,在1×10-5～0.15Pa范围内,快规收集极离子流与发射电子流之比与气压保持良好线性关系;在0 15T的磁场下,快规的规管常数未发生显著变化,在规管对称轴与磁力线的夹角小于15o时,规管常数的变化小于10%。     

Fractional Brownian Heavy Traffic Approximations of Multiclass Feedforward Queueing Networks

We consider multiclass feedforward queueing networks under first in first out and priority service disciplines driven by long-range dependent arrival and service time processes. We show that in critical loading the normalized workload, queue length and sojourn time processes can converge to a multi-dimensional reflected fractional Brownian motion. This weak heavy traffic approximation is deduced from a deterministic pathwise approximation of the network behavior close to constant critical load in terms of the solution of a Skorokhod problem. Since we model the doubly infinite time interval, our results directly cover the stationary case.AMS subject classification: primary 90B15, secondary 60K25, 68M20     

Reference values for drag and lift of a two‐dimensional time‐dependent flow around a cylinder

This paper presents a numerical study of a two‐dimensional time‐dependent flow around a cylinder. Its main objective is to provide accurate reference values for the maximal drag and lift coefficient at the cylinder and for the pressure difference between the front and the back of the cylinder at the final time. In addition, the accuracy of these values obtained with different time stepping schemes and different finite element methods is studied. Copyright © 2004 John Wiley & Sons, Ltd.     

NMR investigation of concentrated alumina and silica slurries

The longitudinal relaxation times (T₁) of water in concentrated silica and alumina slurries were measured as a function of solids content. It was shown that the results could be fit very well with a two-phase fast-exchange model between free and surface-bound water. As expected, values of T₁ for bound water were in the order of 20–2000 times lower than that for free water, indicating a higher effective viscosity of the surface-bound water. The strength of the interaction depended on the particular surface, and all of the aluminas examined interacted more strongly with water than the two silicas studied, which themselves differed considerably. The chemical mechanical polishing (CMP) removal rate of tantalum by silica slurries was shown to be directly correlated with the interaction parameters, derived from the NMR relation times rather than with total surface hydroxyl group concentration.