Mixing properties of mim diodes in the infrared

Point contact MIM diodes of different materials have been tested as harmonic mixers at 29 THz and 88 THz. From the analysis of the I-V static characteristic quantitative informations have been obtained about the effectiveness of the diodes as high order mixers.     

Experimental and computational studies of intracomplex reactions in Mg+(primary, secondary alkylamine) complexes induced by photoexcitation of Mg+

We report herein a comprehensive study of photoinduced reactions in complexes of Mg+ with primary (n-propyl- and isopropylamine) and secondary amines (dipropyl- and diisopropylamine) in the spectral range of 230-440 nm. Similar to the methyl- and ethylamine complexes studied previously, N-H bond activation of these complexes is very unfavorable. Instead, the C(alpha)-C, C-N, and C(alpha)-H bond-cleavage photoproducts are observed after photoexcitation of the Mg+ complexes (3(2)P<--3(2)S). For Mg+(primary amine) complexes, for example, Mg+-NH2CH2CH2CH3, and Mg+-NH2CH(CH3)2, the photoproducts resulting from C(alpha)--C rupture prevail after P(z) and charge-transfer excitations, whereas the Mg+ photofragment is predominant upon P(x,y) excitation. However, with further N-alkyl substitution, as in Mg+(secondary amine) complexes, for example, Mg+-NH(CH2CH2CH3)2 and Mg+-NH[CH(CH3)2]2, a novel intracomplex C-C coupling photoreaction dominates on P(x,y) excitation of Mg+, which is believed to arise from Mg+* insertion into the C-N bond. With P(z) and charge-transfer excitation, the Mg-R elimination photoproducts, arising from C(alpha)-C bond cleavage, predominate. The energetics and possible mechanisms of the intracomplex photoreactions are analyzed in detail with the help of extensive quantum mechanics calculations.     

Photophysical aspects of single-molecule detection by two-photon excitation with consideration of sequential pulsed illumination.

An important goal in single molecule fluorescence correlation spectroscopy is the theoretical simulation of the fluorescence signal stemming from individual molecules and its autocorrelation function. The simulation approaches developed up to now are based exclusively on continuous-wave (cw) illumination and consequently on cw-excitation. However, this approximation is no longer valid in the case of two-photon excitation, for which pulsed illumination is usually employed. We present a novel theoretical model for the simulation of the fluorescence signal of single molecules and its autocorrelation function with consideration of the time dependence of the excitation flux and thus of all illumination-dependent photoprocesses: two-photon excitation, induced emission and photobleaching. Further important characteristics of our approach are the consideration of the dependence of the photobleaching rate on illumination and the low intersystem-crossing rates of the studied coumarins. Moreover, using our approach, we can predict quantitatively the effect of the laser pulse width on the fluorescence signal of a molecule, that is, the contributions of the photobleaching and saturation effects, and thus we can calculate the optimal laser pulse width. The theoretical autocorrelation functions were fitted to the experimental data, and we could ascertain a good agreement between the resulting and the expected parameters. The most important parameter is the photobleaching constant sigma, the cross section of the transition Sn<--S1, which characterises the photostability of the molecules independent of the experimental conditions. Its value is 1.7 x 10(-23) cm2 for coumarin 153 and 5 x 10(-23) cm2 for coumarin 314.     

激光谐振腔内倾斜误差的自适应校正

我们设计制作了一种性能良好的倾斜镜,试验了两种校正系统:微机控制的试探爬山法系统和高频振动爬山法系统。实验结果表明,这两种校正系统,都可以成功地校正腔内倾斜误差。最后,比较了两种校正系统的优缺点。     

可调谐钛宝石双波长激光在β－BaB2O4晶体中和频

本文用矩阵光学推导出了相位共轭腔的热稳条件。     

远洋追踪记

本文记述１９８０年５月,我国首次试验向南太平洋发射洲际运载火箭,远望１号、２号等１８艘舰船开赴落区进行弹道测量及打捞数据舱的经过,并论述了这次试验及激光测距取得成功的重要意义。     

Some observations from interrupted lifetest of GaInAsP/InP inverted-rib laser diodes

Conventionally, lifetests of semiconductor laser diodes usually involved operating the devices continuously at either constant power output or drive current, with periodic recording of their characteristics. In this paper, some effects arising from interrupted lifetest of 1.3 m GaInAsP-InP inverted-rib laser diodes are reported. This unconventional lifetest method involves constant power biasing at 4 mW/facet and 8 mW/facet respectively at 50°C, followed by a period during which the lifetest is interrupted and the devices left unbiased at room temperature. Subsequently, the devices were put back on constant power biasing at 50°C. Among a number of parameters, pronounced reduction in the threshold current, current for 4 mW/facet and 8 mW/facet were observed, indicating strong recovery effects commencing from the time when the life-test was interrupted. Redistribution of mobile defects in the cladding layer is postulated to be the cause of the degradation recovery, and the data supports the occurrence of an aging-current dependent defect annihilation mechanism. Such recovery effects have so far been observed to occur only in the GaInAsP-InP inverted-rib devices.     

掺钕单模光纤激光器的调Q实验研究

采用连续运转Ar+激光器5145 Å输出波长光作为泵浦源,采取端泵浦的平凹光学谐振腔结构,用光学斩波器作为Q开关,建立了掺钕单模光纤激光器的调Q实验装置,对这种激光器的调Q特性进行了实验研究和讨论。     

平板宽波导激光器直流放电特性研究

研究了平板宽波导激光器的直流放电特性和放电区内的气体温度分布。实验和理论分析表明,在给定放电区内最大气体温升的情况下．放电区内所允许的最大注入功率与放电面积成正比,即在直流电激励下平板宽波导激光器具有功率“面积放大”功能。从而为中、大功率ＣＯ２激光器小型化研究提供了新的途径。     

Femtosecond Laser 4D Printing of Light-Driven Intelligent Micromachines

Intelligent micromachines that respond to external light stimuli have a broad range of potential applications, such as microbots, biomedicine, and adaptive optics. However, artificial light-driven intelligent micromachines with a low actuation threshold, rapid responsiveness, and designable and precise 3D transformation capability remain unachievable to date. Here, a single-material and one-step 4D printing strategy are proposed to enable the nanomanufacturing of agile and low-threshold light-driven 3D micromachines with programmable shape-morphing characteristics. The as-developed carbon nanotube-doped composite hydrogel simultaneously enhanced the light absorption, thermal conductivity, and mechanical modulus of the crosslinked network, thus significantly increasing the light sensitivity and response speed of micromachines. Moreover, the structural design and assembly of asymmetric microscale mechanical metamaterial unit cells enable the highly efficient additive nanomanufacturing of 3D shape-morphable micromachines with large dynamic modulation and spatiotemporal controllability. Using this strategy, the world's smallest artificial beating heart with programmable light-stimulus responsiveness for the cardiac cycle is successfully printed. This 4D printing method paves the way for the construction of multifunctional intelligent micromachines for bionics, drug delivery, integrated microsystems, and other fields.