Gain competition effect in dual-wavelength dye lasers

In this paper, we present a theoretical model for the gain competition in dual-wavelength dye lasers. For this purpose the rate equations under the steady-state conditions have been used. The degree of the gain competition is shown to depend on the polarization of the two laser beams. The dependence of the gain competition on various working parameters such as pumping power, dye concentration and the reorientation rate of the molecules or solvent viscosity is studied for two different cases of parallel and orthogonal polarizations. The results of our model show dramatically different behaviors in the two proposed cases.     

AOI技术在激光微孔产品检查中的应用

在过去几年里,小型PCB诸如硅芯片级以及便携式移动电话的生产者和设计者们已经发现:如果要保持自己的竞争力并具备生产高密度封装板能力,就必须采用微孔技术。微孔技术的出现要求针对微孔缺陷的有效检测手段对工艺进行过程控制。本文对激光微孔的自动光学检测进行了详细介绍。     

Anomalies in the Absorption and Reflection of a High-Power Ultrashort Laser Pulse by a Plasma with a Solid-State Density

The patterns of absorption and reflection of an ultrashort laser pulse by a plasma with a solid-state density, which are realized in the mode of the normal skin effect, are studied. It is shown that a decrease in low-power pulse duration shorter than the period corresponding to the fundamental frequency of radiation leads to an increase in the absorption coefficient. If the pulse power is so high as to provide electron heating during a time shorter than the reciprocal fundamental frequency, nonlinear suppression of absorption takes place and the spectrum of the reflected radiation contains odd harmonics of the fundamental frequency.     

A DC excited waveguide multibeam CO2 laser using high frequency pre-ionization technique

High power industrial multibeam CO₂ lasers consist of a large number of closely packed parallel glass discharge tubes sharing a common plane parallel resonator. Every discharge tube forms an independent resonator. When discharge tubes of smaller diameter are used and the Fresnel numberN ≪ 1 for all resonators, they operate in waveguide mode. Waveguide modes have excellent discrimination of higher order modes. A DC excited waveguide multibeam CO₂ laser is reported having six glass discharge tubes. Simultaneous excitation of DC discharge in all sections is achieved by producing pre-ionization using an auxiliary high frequency pulsed discharge along with its other advantages. Maximum 170 W output power is obtained with all beams operating in EH₁₁ waveguide mode. The specific power of 28 W/m is much higher as compared to similar AC excited waveguide multibeam CO₂ lasers. Theoretical analysis shows that all resonators of this laser will support only EH₁₁ mode. This laser is successfully used for woodcutting     

Operating Parameters Optimization of Buffer Gas in Optically Pumped Submillimeter Wave Laser

Based on the basic theory of molecular vibration relaxation and semi-classical density matrix theory, operating parameters optimization of buffer gas in the process of miniature pulsed optically pumped submillimeter wave laser was systemically studied and the theoretical calculated result was tested by experiments. The result would do favor to develop and study high-power and wide-range tunable miniature and high-efficient pulsed optically pumped submillimeter wave laser and also had some instruction to its application.     

激光在医学中的应用

激光在医学领域的应用非常广泛，本文主要介绍了激光诊断和激光治疗的几个重要应用。     

A compact autocorrelator for the wavelength range between 4 and 10 μm

A compact autocorrelator suitable for the measurement of the optical pulse length of the infrared free electron laser (IR-FEL) at the S-DALINAC is described. It allows to investigate the energy transfer process from the electrons into the laser light within the undulator of the FEL. The autocorrelator utilizes the second harmonic generation (SHG) and it provides the possibility of a background-free measurement at wavelengths between 4 and 10 μm. Simulations for three different crystals used for SHG show that the largest efficiency for SHG and the best temporal resolution is achieved with a ZnGeP₂ crystal at a length of 2 mm. A test experiment at the free electron laser for infrared experiments confirmed the expected high efficiency of about 7.5% of SHG for the ZnGeP₂ crystal as well as the easy handling and fast adjustment of the system.     

On the trajectory of a single electron under the action of a linearly polarized laser field

The dynamics of a single electron submitted to a linearly polarized laser field is examined in the non-relativistic case by calculating an upper bound of the position of the electron in the time domain.     

Theoretical Description of the Third Order Parametric Wave Mixing in a Gas-Filled Capillary of Femto-Second Laser Pulse

The theoretical signal-pressure curves are calculated from approximate analytical solutions of the coupledequations describing the third order parametric wave mixing in a gas-filled capillary of femto-second laser pulses. Thecomparison with the corresponding experimental curves suggests that the following three factors exert important influ-ences on the degree of fitting between the theoretical and experimental results: the walk-off, the phase modulation, andthe third order harmonic of idler pulse.     

Stationary Intensity Distribution of Single-Mode Laser Driven by Additive and Multiplicative Colored Noises with Colored Cross-Correlation

Applying the approximate Fokker-Planck equation we derived, we obtain the analytic expression of thestationary laser intensity distribution Pst(Ⅰ) by studying the single-mode laser cubic model subject to colored cross-correlation additive and multiplicative noise, each of which is colored. Based on it, we discuss the effects on the stationarylaser intensity distribution Pst(Ⅰ) by cross-correlation between noises and “color“ of noises (non-Markovian effect) whenthe laser system is above the threshold. In detail, we analyze two cases: One is that the three correlation-times (i.e.the self-correlation and cross-correlation times of the additive and multiplicative noise) are chosen to be the same value(τ1 = τ2 = τ3 = τ). For this case, the effect of noise cross-correlation is investigated emphatically, and we detect thatonly when λ≠ 0 can the noise-induced transition occur in the Pst(Ⅰ) curve, and only when τ≠ 0 and λ≠ 0, can the“reentrant noise-induced transition“ occur. The other case is that the three correlation times are not the same value,τ1 ≠τ2 ≠τ3. For this case, we find that the noise-induced transition occurring in the Pst (Ⅰ) curve is entirely differentwhen the values of τ1, τ2, and τ3 are changed respectively. In particular, when τ2 (self-correlation time of additivenoise) is changing, the ratio of the two maximums of the Pst(Ⅰ) curve R exhibits an interesting phenomenon, “reentrantnoise-induced transition“, which demonstrates the effect of noise “color“ (non-Markovian effect).