Coupling Losses for Resonators with Unequal Apertures for Extended Fresnel Numbers

Coupling losses have been calculated for laser resonators with unequal apertures and extended Fresnel Numbers. This was done using both, diffraction theory and a simple linear model.A close form expression was derived to calculate coupling losses with reasonable accuracies for a limited range of paramters. This should help in the preliminary design of hole coupling laser resonators.     

PIC单片机在激光电源中的应用研究

论述了单片机控制激光电源的原理，提出了产生PWM控制的基本思想及整个控制系统的硬件组成和软件设计方法。     

低强度激光血管内照射对海洛因戒断综合征的疗效观察

对于毒瘾戒断综合症的治疗一般采用强行戒断或逐步撤药等方法 ,但患者非常痛苦 ,且复吸率较高。为了观察低强度He -Ne激光对戒断症状的抑制作用 ,本文用低强度激光血管内照射疗法对 3 0例吸毒戒断综合征患者进行了治疗 ,并与对照组比较。结果证明 :实验组疗效明显优于对照组 (P <0 .0 1) ,为进一步的临床应用提供了临床依据。     

低功率泵浦Ti：Al2O3自锁模激光器

本文报道了低功率泵浦的Ｔｉ：Ａｌ２Ｏ３激光器实现了稳定的自锁模运转，锁模脉冲宽度为１８０ｆｓ。分析了激光器的结构及工作特性。     

Thermal conductivity of poly(vinyl chloride)/polycaprolactone blends

Thermal diffusivity, heat capacity, and density of polyvinyl chloride/polycaprolactone (PVC/PCL) blends were measured by the laser flash method, DSC, and pycnometry, respectively. The thermal conductivity of the PVC/PCL blends was determined from the results. The miscibility of the blend and crystallinity of PCL were determined by DSC. The effect of blend structure on thermal conductivity is discussed. The phase compositions of the PVC/PCL blends are of three types depending on PCL content: i.e., up to 33%, from 33 to 70%, and above 70% PCL by weight. Thermal conductivity, thermal diffusivity, and heat capacity of the PVC/PCL blends are strongly affected by the phase composition of the blend, which changes in a complicated way with PCL content. © 1994 John Wiley & Sons, Inc.     

YAG：Nd激光照射犬气管粘膜的实验研究

An experimental study for the pathologic changes of the canine tracheal mucosa under YAG:Nd laser ablation was performed in order to master the appropriate parameters for the clinical treatment of YAG:Nd laser. 6 male and female Mongolia dogs weighing 13-18 kg were received 20W YAG:Nd laser treatment and their pathologic changes were examined instantly and 3, 7, 14 and 28 days after ablation.     

高功率固体激光器

本文详细讨论了设计高平均功率固体激光器的有关问题,包括激光材料性质、棒状和板条状几何结构,聚光器和光学谐振腔等。分析表明,板条状几何结构固体激光器提供了达到千瓦级功率水平同时又保持良好光束质量的可能性。     

自成像列阵共振腔的分析——Ⅰ.Talbot共振腔

利用自成像效应进行半导体列阵激光器锁相是一种重要的外腔锁相技术,所构成的共振腔可分为Talbot腔和带相位补偿板的Lau腔。我们用Fox-Li方法计算了共振模式。本文给出了Talbot腔的计算结果和分析,表明同相和反相模的损耗随腔长变化存在临界点。     

铸造铝合金(ZL109)激光表面处理

采用功率为2kW级CO_2连续可调式横流激光光源,对不同涂层的ZL109试样表面进行了激光熔凝的实验研究。     

激光对生产β-胡萝卜素的藻种——盐生杜氏藻(Dunaliella salina)诱变的研究

用激光(335nm,0.014MW/mm~2)对产生6-胡萝卜素的盐生杜氏藻(Dunaliella Salina)进行了诱变研究,藻的存活率为90％。诱导后筛选到三个盐生杜氏藻的品系。生长速度较原藻最高增加20％,长度增加7.5％,萨-胡萝卜素生产能力为0.48mg·100ml~(-1)天~-1),比原藻增加19％。