应用无衍射贝塞尔光束的固体线膨胀系数测量系统

测量固体线膨胀系数是工程设计中的一项重要工作。这套非接触固体线膨胀系数测量系统利用激光三角法进行了设计。通过采用线阵CCD作为信号传感器来实现自动化测量。通过采用无衍射贝塞尔光束来提高测量精度和增大测量范围。     

The structure of multi-electrode-pair pulse laser and discharge pulse time selection

Applying multi-electrode-pair pulse TEA CO₂ laser to one optical resonance cavity will have several advantages over traditional method, including higher gain, shorter pulse discharge time interval, and in particular, continuous adjustable time interval of multi-pulse laser output can be achieved without high vacuum condition. To improve laser's working stabilization, we proposed new approaches to optimize laser structure design and discharge pulse time interval selection.     

Simplified and complex modeling of self-sustained discharge-pumped,Ne-buffered XeCl laser kinetics

Two simple kinetic models of a Ne-buffered XeCl laser discharge are presented based on different simplifications of the chemical kinetics of a complex model that recently appeared in the literature. When applied to the study of a small-volume XeCl laser, the results of both simple and complex models are in satisfactory agreement with the experiments. Shifting to a larger-volume laser, both models show problems due to loss of stability of the discharge. A one-dimensional modelling is performed, and it is found that different assumptions on the kinetics of the NeXe⁺ ion in the discharge lead to completely different results as regards the effect of a preionization-triggered instability.     

激光角膜矫正术中所用激光波长的选择

用分光光度计测定了12例兔角膜和1例人角膜的吸收光谱,结果表明波长小于300nm的准分子激光和波长在1.88μm～2.64μm,2.36μm～40μm的激光,均可对角膜进行切割并可望用于激光角膜矫正术。     

软x射线近贴显微技术

软x射线近贴显微技术不但可使活的生物样品成象,分辨率高于光学显微镜,而且人为的样品准备程序在该技术中都可避免。本文描述了用高功率激光打靶产生的等离子体作为软x射线源而进行的近贴显微研究,并得到了分辨率好于1μm的结果。     

激光束偏转法检测金属表面层的缺陷

本文编程计算了由激光光热应产业的金属表面的温度分布和泵浦光的调制频率、金属层厚度等的关系，预言检测浓度缺陷的能力。用激光光束偏转法检测到表面下不同深处的缺陷，并把面扫描幅值信号以三维象和灰度象显示。     

用窄带滤光片作为调谐元件的外腔半导体激光器

分析了窄带滤光片的调谐原理，拟合了一块实际滤光片的透射率函数，它是理论的透射率函数和一个洛仑兹函数的乘积。利用１．３μｍ的外腔式调谐激光器实现了１２７２．５ｎｍ至１２９１．７ｎｍ范围内的不连续宽带调谐。     

铸铝激光熔融处理后的组织与性能

应用光学和电子显微镜及显微硬度计研究了铸造Al-Si合金经激光表面熔融处理后的组织和性能。指出,组织分熔化区、过度区和基体三层。在熔化区中树枝状先共晶α相的平均宽度由原始组织的20～40μm细化到2～3μm,同时共晶组织也被大大细化。这些变化使显微硬度值由67.4提高至109～115.     

自聚焦光纤对半导体激光束的准直研究

介绍了一种新颖的利用自聚焦光纤对半导体激光束的准直技术。该方法结构简单、调整方便。实验研究表明其可使大发散角的半导体激光束压缩到0.01º的数量级,适合作半导体激光器的准直元件而运用于精密测试领域。     

CO2相干激光多普勒测速的研究

叙述运用ＣＷＣＯ２相干激光雷达测量运动目标速度的原理和实验装置，并给出了实验结果，测速精度为０．０１ｍ／ｓ速度分辨率为０．０５ｍ／ｓ，外场实验表明，对于漫射目标，作用距离２００ｍ。