Development of variable‐magnification X‐ray Bragg optics

A novel X‐ray Bragg optics is proposed for variable‐magnification of an X‐ray beam. This X‐ray Bragg optics is composed of two magnifiers in a crossed arrangement, and the magnification factor, M, is controlled through the azimuth angle of each magnifier. The basic properties of the X‐ray optics such as the magnification factor, image transformation matrix and intrinsic acceptance angle are described based on the dynamical theory of X‐ray diffraction. The feasibility of the variable‐magnification X‐ray Bragg optics was verified at the vertical‐wiggler beamline BL‐14B of the Photon Factory. For X‐ray Bragg magnifiers, Si(220) crystals with an asymmetric angle of 14° were used. The magnification factor was calculated to be tunable between 0.1 and 10.0 at a wavelength of 0.112 nm. At various magnification factors (M≥ 1.0), X‐ray images of a nylon mesh were observed with an air‐cooled X‐ray CCD camera. Image deformation caused by the optics could be corrected by using a 2 × 2 transformation matrix and bilinear interpolation method. Not only absorption‐contrast but also edge‐contrast due to Fresnel diffraction was observed in the magnified images.     

Large‐acceptance diamond planar refractive lenses manufactured by laser cutting

For the first time, single‐crystal diamond planar refractive lenses have been fabricated by laser micromachining in 300 µm‐thick diamond plates which were grown by chemical vapour deposition. Linear lenses with apertures up to 1 mm and parabola apex radii up to 500 µm were manufactured and tested at the ESRF ID06 beamline. The large acceptance of these lenses allows them to be used as beam‐conditioning elements. Owing to the unsurpassed thermal properties of single‐crystal diamond, these lenses should be suitable to withstand the extreme flux densities expected at the planned fourth‐generation X‐ray sources.     

A novel imaging tool for hepatic portal system using phase contrast technique with hydrogen peroxide‐generated O2 gas

The objective of this study was to investigate the potential of hydrogen peroxide‐generated oxygen gas‐based phase contrast imaging (PCI) for visualizing mouse hepatic portal veins. The O₂ gas was made from the reaction between H₂O₂ and catalase. The gas production was imaged by PCI in real time. The H₂O₂ was injected into the enteric cavity of the lower sigmoid colon to produce O₂ in the submucosal venous plexus. The generated O₂ gas could be finally drained into hepatic portal veins. Absorption contrast imaging (ACI) and PCI of O₂‐filled portal veins were performed and compared. PCI offers high resolution and real‐time visualization of the O₂ gas production. Compared with O₂‐based ACI, O₂‐based PCI significantly enhanced the revealing of the portal vein in vivo. It is concluded that O₂‐based PCI is a novel and promising imaging modality for future studies of portal venous disorders in mice models.     

Improving copper plating adhesion on glass using laser machining techniques and areal surface texture parameters

Glass is a promising substitute substrate material being evaluated for electronic packaging technology. Improving the electroless copper plated layer adhesion of the glass is one of the most important considerations for development of the technology. An excimer laser (248 nm) was used for structured texturing of glass surfaces (to improve adhesion) by changing mask dimensions, laser operating parameters and overlapping pitch spacing, and therefore producing a range of micro-scale features. Electroless plated copper adhesion strength was assessed using quantitative scratch testing, demonstrating that micro-patterned structures can significantly improve copper/glass adhesion. New ISO 25178 Part 2 areal surface texture parameters were used to characterise the surface roughness of ablated glass surfaces, and correlated to the scratch testing results. Highly correlated parameters were identified that could be used as predictive surface design tools, directly linking surface topography to adhesion performance, without the need for destructive adhesion quantification via scratch testing.     

Fenna-Matthews-Olson捕光复合物中的冗余结构

研究了绿色硫细菌中捕光天线复合物Fenna-Matthews-Olson的一个子单元和反应中心的能量传递.通过细菌叶绿素分子的能量和耦合强度,构建了包含反应中心的哈密顿量及约化模型.通过级联运动方程研究了不同分子间和反应中心的激子布居演化.计算了Fenna-Matthews-Olson及其约化模型的二维三阶光子回波谱,获得能量传榆过程中不同激子态间的相干性.结果表明在能量捕获过程中,Fenna-Matthews-Olson复合物存在冗余结构.     

确定性矩阵可分离压缩成像

针对可分离压缩传感使用的可分离随机正交矩阵在处理大尺度图像等高维信号感知时难度太大或成本过高的问题,引入确定性测量矩阵,提出确定性矩阵可分离压缩传感,可将如托普利兹矩阵及循环矩阵等具有确定性结构的矩阵作为可分离压缩传感的左、右可分离矩阵.该方案可以降低独立元素的数目,从而显著降低前端物理实现的难度与成本.数值模拟实验分别评估了该方法在不同采样率及不同图像尺寸下的压缩重建性能,结果表明该方法在独立元素非常少的情形下得到与原随机正交矩阵相近的重建质量,证明了其可行性.     

飞秒激光冲击AZ31B镁合金过程的数值模拟

采用有限元分析法对飞秒激光冲击AZ31B镁合金进行数值模拟,研究了激光冲击处理对镁合金变形过程的影响,分析了单脉冲激光冲击下材料内部的位移、动能、应力和应变的分布情况,得到了材料的瞬态速度和应变率变化过程.仿真结果表明,单脉冲飞秒激光冲击镁合金产生的塑性变形,可在材料表面形成微米级凹坑,中心点处最大位移为34μm,最大变形速度390m/s;在冲击初期,材料表面的应力和应变主要分布在冲击区域中心节点和边缘附近,并且得到镁合金的最大应力和最大应变率分别为955 MPa和1.8×106 s-1.研究结果能够为深入分析飞秒激光与镁合金作用时材料变形参量的变化规律提供数值理论依据.     

Novel interconnection scheme for thin‐film silicon solar modules with conductive intermediate reflector

Intermediate reflector layers are commonly used for light man‐agement purposes in multi‐junction silicon based devices containing a‐Si:H top‐ and µc‐Si:H bottom‐sub‐cells. A low resistance of such layers can have a severe impact on the solar module performance due to shunting of the bottom sub‐cell by the P2 scribe. A common solution for this problem is the use of an additional scribe line. However, not only the additional processing step is disadvantageous but also the dead area losses are increased as well by the additional scribe. This work introduces a novel solar cell stripe interconnection scheme that requires only three scribing processes with similar dead area losses as they would be apparent in the standard interconnection scheme. An implementation to mini modules shows no negative impact on the electrical properties and simultaneously reducing the required number of scribing steps. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

直接测距型激光主动成像系统发展现状

对直接测距型激光主动成像系统进行了深入研究。按照工作方式分类介绍了国外相关研究机构激光主动成像系统的工作原理及系统参数, 归纳总结并比较分析了各工作方式的优缺点。分析认为:基于单点或小面阵探测器配合光机扫描方案可实现较远作用距离, 但其对激光器重频要求较高, 后续数据处理复杂, 且系统体积、功耗较大;而基于Flash探测器的激光主动成像系统易于实现小型化, 对激光器重频要求较低。作用距离受限问题可通过电子扫描得以有效解决。在具体应用时, 需根据实际需求, 综合考虑系统体积、质量、功耗、激光器输出峰值功率及脉冲重复频率、所能获取的探测器类型、后续数据处理能力等多种因素折衷选取。