基站电磁环境测试方法的比较与分析

GSM移动通信基站电磁辐射测量常用的方法有两种,一种是用频谱分析仪和定向天线进行测量,计算出辐射功率密度;另一种是用射频电磁辐射仪,可以直接读出辐射功率密度.对实际运行的基站,两种方法的测量结果不一致,通过在实验室的反复实验,分析出这两种测量方法的特点,找到了测量结果不一致的原因.电磁辐射的测量不仅要了解测量方法的特点,还要了解辐射信号的特性,才能给出恰当的测试结论.     

Cu（Ⅱ）,Fe（Ⅲ）,Co（Ⅱ）含硫Schiff碱配合物的合成与性质

本文合成了四种新配合物:二氯化双苯甲醛缩氮基硫脲合铜(Ⅱ)(Cu~Ⅱ(Betsc—H)_2Cl_2),三氯化水杨醛缩氨基硫脲合铁(Ⅲ)(Fe~Ⅲ(Satsc—H_2)Cl_3,二氯化双对二甲氨基苯甲醛缩氨基硫脲合钴(Ⅱ)(Co~Ⅱ(Dmabtsc—H)_2Cl_2·H_2O)及双对硝基苯甲醛缩氨基硫脲合钴(Ⅱ)醋酸盐(Co~Ⅱ(Nitsc—H)(Nitsc)(Ac))。用元素分析和IR测定了化合物的组成,并进行了吸放O_2和CO的试验。     

Nickel versus copper: enhanced antibacterial activity in a series of new nickel(II) Schiff base complexes

Five new Ni(II) Schiff base complexes [NiL^x(Solv)₂] denoted by NiL^x, x = 1–5, were synthesized and characterized. The Schiff base ligands were synthesized from the condensation of 5-bromo-2-hydroxy-3-nitrobenzaldehyde with different aliphatic and aromatic diamines. The X-ray crystal structure of NiL³ was determined. The ligands and complexes were tested as antibacterial agents against two gram(+) and two gram(?) human pathogenic bacteria. The complexes showed moderate antibacterial activity against both gram type bacteria. The new Ni(II) complexes showed enhanced antibacterial activity compared to the previously reported Cu(II) complexes of the same ligands.     

Ni(II) selective sensors based on Schiff bases membranes in poly(vinyl chloride)

The two nickel chelates of Schiff bases, 3-hydroxy-N-{2-[(3-hydroxy-N-phenylbutyrimidoyl)-amino]-phenyl}-N′-phenylbutyramidine (M₁) and bis-4-(ethyliminomethyl)naphthalene-1-ol (M₂), have been synthesized and explored as ionophores for preparing PVC-based membrane sensors selective to nickel ion. The influences of membrane compositions on the potentiometric response of the electrodes have been found to substantially improve the performance characteristics. The best performance was obtained with the electrode having a membrane composition (w/w; mg) of (M₁): PVC:NaTPB:CN in the ratio 5:150:5:150. The sensor shows a linear potential response for Ni²⁺ over a wide concentration range 1.6 × 10⁻⁷ to 1.0 × 10⁻² M with Nernstian compliance (30.0 ± 0.2 mV/decade of activity) within pH range 2.5-9.5 and a fast response time of 10 s. The sensor has been found to work satisfactorily in partially non-aqueous media up to 20% (v/v) content of methanol, ethanol, and acetonitrile and could be used for a period of 4 months. The analytical usefulness of the proposed electrode has been evaluated by its application in the determination of nickel in real samples. The practical utility of the membrane electrode has also been observed in the presence of surfactants.     

Synthesis and characterization of some Schiff-base-containing polyimides

The diamine, 4-aminophenyloxy-N-4-[(4-amiophenyloxy)benzylidene]aniline, was prepared via the nucleophilic substitution reaction and was polymerized with different dianhydrides either by one-step solution polymerization reaction or two-step procedure. The latter includes ring-opening polyaddition to give poly(amic acid), followed by cyclodehydration to polyimides. The inherent viscosity ranges from 0.61–0.79 dl/g. Some of the polymers were soluble in most of the organic solvents such as DMSO, DMF, DMAc, NMP, and m-cresol even at room temperature. The degradation temperature of the resultant polymers falls in the ranges from 240–500 °C in nitrogen with only 10% weight loss. Specific heat capacity at 200 °C ranges from 1.0929–2.6275 J g⁻¹ k⁻¹. The temperature at which the maximum degradation of the polymer occurs ranges from 600–630 °C. The glass transition temperature (Tg) values of the polyimides ranged from 185 to 272 °C. The activation energy and enthalpy of the polyimides ranged from 47.5–55.0 kJ/mole and 45.7–53.0 kJ/mole and the moisture absorption in the range of 0.23–0.72%.     

Twist‐dependent stacking energy of base‐pair steps in B‐DNA geometry: A density functional theory approach

Stacking energy of all the 10 unique DNA base‐pair steps (bp step) are calculated using density functional theory within the ultrasoft pseudopotential plane wave method and local density approximation for the exchange‐correlation functional. We have studied the dependence of stacking energy on twist angle, an aspect found difficult to explain using classical theory. We have found that the twist angle for different bp steps at stacking energy minimum matches extremely well with the values of average twist obtained from B‐DNA crystal structure data. This indicates that the use of a proper quantum chemical method to calculate the π‐π electronic interactions may explain stacking energy without incorporating hydrophobic interaction through solvent or effect of backbone through pseudobond. From the twist angle‐dependent stacking energy profile, we have also generated the probability distributions of twist for all the bp steps and calculated the variance of the distribution. Our calculated variances show similar trend to that of the experimental data for which sufficient numbers of data are available. The TA, AT, and CG doublets show large variances among the 10 possible bp steps, indicating their maximum flexibility. This might be the case of unusual deformation observed at the TATA‐box while binding to TBP protein. © 2008 Wiley Periodicals, Inc. Int J Quantum Chem, 2008     

A new series of dinucleating macrocyclic ligands and their complexes of zinc(II)

A new category of dinucleating macrocyclic Schiff base ligands with ring sizes from 34- to 52-membered have been synthesised employing metal template procedures involving the reaction of o-phenylenediamine with a series of α,ω-bis(3′-hydroxy-4′-formylphenyloxy)alkanes in the presence of calcium(II), barium(II) or manganese(II). The latter cations act as ‘transient’ templates for formation of the corresponding metal-free Schiff base macrocyclic ligands, H₄Lⁿ (where n signifies the number of carbons in each linking bis-alkoxy chain); the macrocycles corresponding to n = 4, 6 and 8 were isolated and characterised while, for n = 1, in which single methylene groups acts as the bridges between salicyl moieties, the cyclic product was used directly for preparation of its dinuclear complex, [Zn₂L¹], without prior isolation. Evidence for the templating role of barium in the preparation of H₄L⁶ and H₄L⁸ was obtained by isolation of the corresponding species of type H₄Lⁿ·2Ba(ClO₄)₂ (n = 6 or 8) as ‘intermediates’ before generation of the respective metal-free macrocycles. Reaction of zinc(II) acetate with the free macrocycles in methanol yielded complexes of type [Zn₂Lⁿ] in all cases. A related non-cyclic ligand, H₂L⁰ and its corresponding mononuclear complex, [ZnL⁰]·H₂O, were also synthesised and its spectral properties compared with those of the macrocyclic derivatives. The elemental analyses, ¹H NMR, IR, UV–Vis and MS spectra of the respective zinc complexes in each case were in accord with the formation of the expected 2:2 condensation product. The results of DFT calculations to probe aspects of the electronic and structural natures of both H₂L¹ and H₄L⁴ are briefly presented.     

碱性去活性柱液相色谱测定水溶性维生素

采用碱性去活性柱高效液相色谱法同时分离测定了７种水溶性维生素。不需加入离子对试剂和胺类改性剂,峰形尖锐,用梯度洗脱分离完全,效果良了,方法的精密度为标准偏差５％以内,回收率为８９％￣１０２％,并用于实际样品的测定。     

Spectrophotometric and conductometric study of complexation of salophen and some transition metal ions in nonaqueous polar solvents

The complexation reaction between Cu(2+), Co(2+) and Ni(2+) metal cations with N,N'-bis(salicylidene)-1,2-phenylenediamine (salophen), in three nonaqueous polar solvents such as: acetonitrile (AN), dimethyl sulfoxide (DMSO), methanol (MeOH) and two binary mixtures of AN:DMSO and AN:MeOH at 25 degrees C were studied by spectrophotometric and conductometric methods. All investigated metal ions form 1:1 ML complex which their stability constants were determined and increase as Irving-Williams stability order of Co(2+)相似文献   

Acceleration of Long‐Range Photoinduced Electron Transfer through DNA by Hydroxyquinolines as Artificial Base Pairs

The C‐nucleoside based on the hydroxyquinoline ligand (Hq) is complementary to itself and forms stable Hq–Hq pairs in double‐stranded DNA. These artificial Hq–Hq pairs may serve as artificial electron carriers for long‐range photoinduced electron transfer in DNA, as elucidated by a combination of gel electrophoretic analysis of irradiated samples and time‐resolved transient absorption spectroscopy. For this study, the Hq–Hq pair was combined with a DNA‐based donor–acceptor system consisting of 6‐N,N‐dimethylaminopyrene conjugated to 2′‐deoxyuridine as photoinducible electron donor, and methyl viologen attached to the 2′‐position of uridine as electron acceptor. The Hq radical anion was identified in the time‐resolved measurements and strand cleavage products support its role as an intermediate charge carrier. Hence, the Hq–Hq pair significantly enhances the electron hopping capability of DNA compared to natural DNA bases over long distances while keeping the self‐assembly properties as the most attractive feature of DNA as a supramolecular architecture.