Effect of conformational rigidity on the glass transition and initial decomposition temperatures of polyimides

The dependence of the glass transition and initial decomposition temperatures of polyperyleneimide and polynaphthylimide on the conformational rigidity was studied by the Monte Carlo, Kuhn segment, and quantum chemical AM1 methods. The corresponding linear plots can be used for estimation of the glass transition and initial decomposition temperatures when experimental determination is difficult.     

The development of an 18-locus Y-STR system for forensic casework

The aim of the present work was to improve the discriminatory potential, and hence the probative value, of Y-STR-based testing by extending the set of Y chromosome STR loci available for forensic casework. In accordance with the requirements of a Y chromosome multiplex analytical system developed specifically for forensic casework use, we have sought to maximize the number of loci able to be co-amplified, ensure appropriate assay sensitivity (1–2 ng of input genomic DNA), balance inter-locus signals and minimize confounding female DNA artifacts. Two Y chromosome STR systems, multiplex I (MPI) and multiplex II (MPII), have been developed which permit the robust co-amplification of 18 Y-STRs. The loci include DYS19, DYS385(a) and (b), DYS388, DYS389I and II, DYS390, DYS391, DYS392, DYS393, DYS425, DYS434, DYS437, DYS438, DYS439, Y-GATA-C4, Y-GATA-A7.1 (DYS460) and Y-GATA-H4. The two multiplex systems are robust over a wide range of primer, magnesium, and DNA polymerase concentrations and perform well under a variety of cycling conditions. Complete male haplotypes can be obtained with as little as 100–250 pg of template DNA. Although a limited number of female DNA artifacts are observed in mixed stains in which the male DNA comprises 1/100 of the total, the male profile is easily discernible. Slightly modified versions of MPI and MPII demonstrate a significant reduction in female artifacts. Thus, it may not be necessary to employ a differential extraction strategy to obtain a male haplotype (or haplotypes in the case of multiple male donors) in cases of sexual assault. The potential utility of MPI and MPII for forensic casework is exemplified by their ability to dissect out the male haplotype in post-coital vaginal swabs and to determine the number of male donors in mixed semen stains.This study has emphasized the need for novel Y-STR multiplexes developed for forensic use to undergo a series of validation exercises that go beyond simply optimizing the PCR reaction conditions. Specifically, stringent performance checks on their efficacy need to be carried out using casework-type specimens in order to determine potential confounding effects from female DNA.     

钴与2-[2-(5-溴苯并噻唑)偶氮]-5-二甲氨基苯甲酸显色反应的分光光度法研究

本文合成丁新试剂2-[2-(5-溴苯并噻唑)偶氮-5-二甲氨基苯甲酸(5-Br-BTAMB)。研究了在表面活性剂存在下它与钴的显色反应。发现 TritonX-100存在下,钴与5-Br-BTAMB在 pH6.0～8.5范围内形成稳定的蓝色配合物。其最大吸收峰位于660nm。表观摩尔吸光系数为1.22×10~5L·mol·cm~(-1)。配合物中钴与5-Br-BTAMB 的组成比为1:2.钴浓度在0～12μg/25ml 范围内呈良好的线性关系。在硫脲存在下,该方法具有良好的选择性,用于测定含钴分子筛和 V_(B12)中微量钴。结果令人满意。     

Surface-modified CdSe quantum dots as luminescent probes for cyanide determination

Luminescent surface-modified CdSe semiconductor quantum dots (QDs), with nanoparticle (NP) size distribution in the order of 2-7 nm, have been synthesized for optical determination of cyanide ions. The nanoparticles have been functionalised with tert-butyl-N-(2-mercaptoethyl)-carbamate (BMC) groups and exhibit a strong fluorescent emission at about 580 nm with rather long fluorescence lifetimes (several hundred nanoseconds) in aerated methanolic solution. The observed luminescence emitted by the synthesized nanocrystals was tremendously increased by photo-activation under sunlight exposure. The functionalised QDs turned out to exhibit excellent long-term stability when stored in the dark (no significant changes in QDs luminescence emission intensity was observed even after two months from synthesis). The functionalisation of the NPs with carbamate ligand allowed a highly sensitive determination of free cyanide via analyte-induced changes in the photoluminescence (fluorescence quenching of intensity at 580 nm and lifetime changes) of the modified quantum dots (excited at 400 nm). A detection limit of 1.1 × 10⁻⁷ M (2.9 μg l⁻¹) of cyanide ions was obtained, while the interfering effect of other inorganic anions (including NO₃⁻, Cl⁻ or SCN⁻) was negligible even at 200-fold level concentrations in excess of cyanide.     

4-hydroxy-2-quinolones. 124. Synthesis and structure of ethyl 2-bromomethyl-5-oxo-1,2,6,7,8,9-hexahydro-5H-oxazolo-[3,2-<Emphasis Type="Italic">a</Emphasis>]quinoline-4-carboxylate

The hydrogenation of the benzene part of the molecule in N-allyl-substituted 4-hydroxy-2-quinolinones does not affect the nature of their bromination by molecular bromine and gives 2-bromomethyl-5-oxo-1,2,6,7,8,9-hexahydro-5H-oxazolo[3,2-a]quinolines. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 8, pp. 1180–1188, August, 2007.     

Validation of a direct non-destructive quantitative analysis of amiodarone hydrochloride in Angoron formulations using FT-Raman spectroscopy

Raman spectroscopy was applied for the direct non-destructive analysis of amiodarone hydrochloride (ADH), the active ingredient of the liquid formulation Angoron^®. The FT-Raman spectra were obtained through the un-broken as-received ampoules of Angoron^®. Using the most intense vibration of the active pharmaceutical ingredient (API) at 1568 cm⁻¹, a calibration model, based on solutions with known concentrations, was developed. The model was applied to the Raman spectra recorded from three as-purchased commercial formulations of Angoron^® having nominal strength of 50 mg ml⁻¹ ADH. The average value of the API in these samples was found to be 48.56 ± 0.64 mg ml⁻¹ while the detection limit of the proposed technique was found to be 2.11 mg ml⁻¹. The results were compared to those obtained from the application of HPLC using the methodology described in the European Pharmacopoeia and found to be in excellent agreement. The proposed analytical methodology was also validated by evaluating the linearity of the calibration line as well as its accuracy and precision. The main advantage of Raman spectroscopy over HPLC method during routine analysis is that it is considerably faster and no solvent consuming. Furthermore, Raman spectroscopy is non-destructive for the sample. However, the detection limit for Raman spectroscopy is much higher than the corresponding for the HPLC methodology.     

Speciation analysis of chromium by separation on a 5-palmitoyl oxine-functionalized XAD-2 resin and spectrophotometric determination with diphenylcarbazide

The method developed in this work for the separation and preconcentration of Cr(III) is based on its retention by an Amberlite XAD-2 copolymer resin functionalized with 5-palmitoyl-8-hydroxyquinoline (oxine), abbreviated XAD-POx, with the ligand covalently bound to the copolymer. Cr(III) sorption was quantitative within the pH range 4.5–7.0 and Cr(VI) was not retained. The Cr(III) held by the resin column was eluted with a hot solution of H₂O₂ in pH9.0 aqueous NH₃–NH₄Cl buffer, and Cr oxidized to CrO₄^2– was rejected by the chelating cation-exchanger column. Any Cr(VI) originally present with Cr(III) could be reduced with an acidic solution of H₂O₂, and retained by the column yielding total Cr results, Cr(VI) being determined from the difference. The resin showed a maximal preconcentration factor of 60 for Cr(III), the LOD and LOQ being 9.3 and 30.1 nmol L^–1, respectively. The developed preconcentration-speciation analysis was finished with a diphenylcarbazide (DPC) spectrophotometric procedure suitable for conventional laboratories. The resin showed excellent salt tolerance, enabling Cr analysis in seawater, and was stable over extended use. All the interferents of this procedure that normally occur in an electroplating effluent, a blended coal CRM, and a standard steel sample could be removed by the recommended procedure, by use of partial and total selectivity at the adsorption and desorption stages, respectively, enabling preconcentration and colorimetric determination of chromium in various complex matrices.     

Synthesis,Characterization and Thermal Decompositions Studies of Some Malates Coordination CompoundsI. iron nickel compounds

The thermal behaviour of three coordination compounds, potential precursors of nickel ferrite [Fe₂Ni(C₄H₄O₅)_2.5(OH)₂]NO₃·5H₂O,[Fe₂Ni(C₄H₈O₃N₂)₄](NO₃)₈·24H₂O and (NH₄)[Fe₂Ni(C₄H₄O₅)₃(OH)₃]·3H₂O has been investigated to evaluate their suitability as precursors for nickel ferrite. For a complete and reliable assignment of the thermal transformations, the isolable solid intermediates and end products were characterized by IR, X-ray diffraction and Mössbauer investigations. A decomposition scheme is proposed.     

Stereoselective synthesis of (E)-N,N-diethyl-3-(imidazo[1,2-a]pyrid-2-yl)-2-(phenylsulfonyl)propenamide

The title compound, gem-amidovinylsulfone 3, was synthesized stereoselectively by aldolic condensation of N,N-diethylphenylsulfonylacetamide 1 on imidazo[1,2-a]pyridine-2-carbaldehyde 2 adding Et₃N at the end. The X-ray crystal structure of 3 [C₂₀H₂₁N₃O₃S: M_r=383.5, monoclinic, P2₁, a=8.191(4) Å, b=21.132(2) Å, c=11.752(1) Å, β=96.40(2)°, V=2022(1) Å³, Z=4 (two molecules per asymmetric unit), D_calc=1.260 g cm⁻³, λ(Mo Kα)=0.71073 Å, μ=0.184 mm⁻¹, F(000)=808, T=293(2)K, R=0.059 for 5105 observed reflections with I≥2σ(I)] was determined, and confirmed the (E) configuration.     

Thermal Analysis of Fe(III) Complexes with Salicylaldehyde Semi-, Thiosemi- and S-methylisothiosemi-carbazones

The paper describes the results of differential thermal analysis of the octahedral Fe(III) complexes of the general formula [Fe(HLⁿ)₂]Cl and Fe(HL³)L³, as well as of the corresponding ligands H₂Lⁿ (H₂Lⁿ — tridentate salicylaldehyde semi thiosemi- and S-methylisothiosemi-carabazones with n=1, 2 and 3 respectively). The decomposition of the complexes involving sulphur-containing ligands (H₂L² and H₂L³) starts with sulphur elimination. In case of the complexes [Fe(HL²)]Cl and [Fe(HL³)]Cl sulphur evolves independently, whereas with Fe(HL³)L³ it is eliminated within the SCH₃ group. In the former case, sulphur elimination takes place at the same temperature for both complexes. The change in the coordination mode, being a consequence of the replacement of O by S, has no essential effect on thermal stability of the coordination polyhedron. The complexes involving ONN coordination, realized with the H₂L³ ligand, exhibit a comparatively highest thermal stability of the coordination polyhedron.This revised version was published online in November 2005 with corrections to the Cover Date.