Macro-Reticular Ion Exchange Resins for Recovery of Direct Dyes from Spent Dyeing and Soaping Liquors

Dyes are a major class of organic pollutants that are well-known for their harmful impact on aquatic life and humans. Several new strategies for removing colours from industrial and residential effluents have recently emerged, with adsorption being the best option. The current study looked at the recovery of direct dyes from aqueous streams for reuse using macro-reticular ion exchange resins (IERs). The investigation includes dyeing single jersey cotton grey textiles with direct dyes from the Isma dye Company in Kafr El Dawar, Egypt. After centrifuging and separating the supernatant liquid, solutions from thirteen different dyes, produced at an average concentration between the wasted and soaping liquor concentrations, were calculated spectrophotometrically from the first dyeing trials. Kinetic data were well fitted with pseudo-second-order rate kinetics. The amounts of dye retained by the anion exchangers increased with a rise in temperature in the case of Strong Base Resin (SBR) and vice versa for Weak Base Resin (WBR). Batch adsorption experiments with SBR and WBR were conducted for each dye, and both Freundlich and Langmuir isotherms were constructed. It was found that adsorption obeyed both isotherms, that monolayer adsorption took place, and that the dye molecular weight, structure, and solubility, as well as the type of anionic resin used, had varying effects on the extent of absorption. The monolayer sorption capacities Q₀ determined from the Langmuir isotherm model for the strongly and weakly basic anion exchangers were found to be 537.6 and 692 mg/g for Direct Yellow RL, respectively. As a result, Yellow RL exhibited the greatest adsorption on both SBR and WBR. Orange GRLL, Blue 3B, and Congo Red, on the other hand, were the poorest colours absorbed by the IERs, whereas Blue RL demonstrated good adsorption by SBR and accelerated adsorption by WBR. Most of the dyes may be recovered and reused in this manner.     

单分散SiO2纳米颗粒复合凝胶电解质的应用

以单分散程度较高的SiO₂纳米颗粒(约130 nm)作为填料,聚偏氟乙烯-六氟丙烯(PVDF-HFP)作为聚合物基质,采用简便的物理共混法制备出了一种单分散SiO₂纳米颗粒复合凝胶聚合物电解质(MCGPEs)并将其应用于锂电池中。扫描电镜结果表明,SiO₂纳米颗粒在聚合物基体中分散均匀。与传统凝胶聚合物电解质(GPEs)和商业SiO₂颗粒复合凝胶电解质(CGPEs)相比,MCGPEs有着更高的电解液吸液能力和离子电导率,并且具备更强的锂离子迁移能力。此外,使用MCGPEs作为电解质的锂电池,在1.0C下历经300次循环后仍然保持了121.1 mAh·g^-1的较高比容量,表现出了优异的循环性能。同时,其倍率性能也十分优异,在10C倍率下获得了135 mAh·g^-1的比容量,远高于GPEs锂电池(76.2 mAh·g^-1)。     

MEMS工艺制备pH-ISFET/REFET功能膜研究

微电子技术的快速发展,促使硅基传感器向着集成化、微型化、可批量加工方向发展.对于pH-ISFET集成芯片而言,如何以MEMS工艺制备性能优良的pH功能膜,是其发展的关键.目的：以适合批量加工的MEMS工艺研制pH功能膜;方法：在小尺寸集成芯片的基础上,以MEMS工艺分别制备Ta2O5材料的pH敏感膜,PTFE材料的pH钝化膜;结果：在pH1～12范围内,Ta2O5膜pH-ISFET对H＋的灵敏度达56mV/pH,PTFE膜REFET对H＋的响应仅为0.13mV/pH;结论：采用MEMS工艺,可对以标准CMOS技术加工的ISFET集成芯片系统,进行后续加工,从而实现传感器芯片系统的全过程批量加工.     

螯合树脂浓缩柱预富集低压离子色谱分光光度法测定海水中痕量铅

采用螯合树脂浓缩柱预富集低压离子色谱分光光度法测定海水中痕量的铅。对于2.0μg/L的Pb2 溶液,测定的相对标准偏差为2.9%(n=8);将该法应用于不同盐度海水中铅的测定,获得满意结果,标准加标回收率在94%~101%之间,该法可以识别Ⅰ类海水,可以测定Ⅱ~Ⅳ类海水。     

膜渗透与离子色谱联用技术测定蔬菜中亚硝酸盐和硝酸盐

建立了膜渗析与离子色谱联用技术分析蔬菜等复杂基体中亚硝酸盐和硝酸盐的方法。蔬菜样品经沸水浴后,试样液通过膜渗析除去水溶性大分子杂质和颗粒,直接进入离子色谱分析。渗析池采用0.20μm的醋酸纤维为渗析膜,以水为接收液,分析柱为Metrosep A Supp4-250阴离子交换柱,以1.8mmol/L Na2CO3 1.7mmol/L NaHCO3为流动相,采用化学抑制电导检测。以20g称样计量,方法中NO2-、NO3-的检出限分别为0.075mg/kg和0.105mg/kg;实际样品的加标回收率分别为80.6%~98.7%和90.5%~114%;相对标准偏差(RSD)≤10%。本方法前处理简单,重现性好,准确度高。     

棱形石墨烯纳米孔道内离子传输性能的分子动力学模拟

纳米通道的尺寸、结构和表面化学对其内部溶液的分布结构和输运性质有着重大影响.本文研究了一种全新的菱形石墨烯纳米通道.这种理想的通道与最近被广泛研究的金属有机框架材料(MOF)的内部结构类似,有着与传统的碳纳米管截然不同的内部结构.本文使用分子动力学模拟的方法研究在不同尺寸的菱形石墨烯纳米通道内的KCl溶液的性质,并将其与同尺寸的单壁碳纳米管进行了比较.研究结果表明在小孔道内(<20?)其内部的溶液结构呈现若干个密度极高的聚集区域,即出现了结晶化的趋势．这一研究结果,将为MOF的结构设计提供思路,从而有望实现类似于生物离子通道的高选择性和高传输能力.     

新型成膜电解液添加剂亚硫酸丁烯酯的电化学行为

合成制备了一种新的环状亚硫酸酯类有机溶剂——亚硫酸丁烯酯(BS). 量子化学计算结果表明, 亚硫酸丁烯酯有机溶剂分子的总能、LUMO值比碳酸丙烯酯有机溶剂的低, 具有较强的得电子能力, 不易被氧化. 其作为添加剂与碳酸丙烯酯(PC)混合应用于锂离子电池中, 可有效地抑制PC在石墨电极中的共插入, 能显著改善循环性能.     

全氟二异丙基膦酸锂的合成及其电化学性能研究

以合成的氯代二异丙基膦为原料, 利用电化学全氟化方法, 得到全氟二异丙基膦酸锂(Li[(C3F7)2PF4]), 并对其物理和电化学性能进行了研究.     

一类新的红色荧光粉MY2S4:Er3+(M=Sr2+,Ba2+)的合成与表征

Eu2 激活的CaS: Eu[1],Eu3 激活的硫氧化物[2],Pr3 激活的Ca0.8Zn0.2TiO3[3]以及Eu2 和Mn2 掺杂的SrY2S4[4]都是重要的红色发光材料.     

比浊法测定酸性镀铜液中微量氯离子

以乙二醇为增溶剂,硝酸银作沉淀剂,采用氯化银比浊法,在不分离硫酸铜的条件下,直接测定酸性镀铜液中微量氯离子。测定波长为440 nm,线形范围为0~50μg/25 mL,其表观摩尔吸光系数ε=1.3×105,方法检出限为0.035μg/mL,该法用于测定酸性镀铜液中微量氯离子在不同水平的加标回收率为95.4%~104.5%。结果表明,该法准确,快速,简便,其它的常见离子无干扰。