钛合金（TC-6）二阶和三阶弹性常数

 用脉冲回波重叠法测量了钛合金（TC-6）的二阶、三阶弹性常数。实验中发现dμ/dp<0（p<0.17 GPa）,dμ/dp>0（p>0.17 GPa）。     

付里叶变换红外光谱仪的操作参数对光谱的影响

本文以二苯基甲酮的ＫＢｒ压片为标样，在Ｂｒｕｋｅｒ ＩＦＳ １２０ＨＲ付里叶变换红外光谱仪上系统考察了该仪器折一些重要操作参数（光源光栏、切趾函数、扫描速度）对光谱质量（信噪比，分辨率）的影响。从而获得了测样时的优化操作条件。     

反相液体色谱中饱和醇保留行为的研究 Ⅰ.低碳醇保留行为与溶质分子结构的关系

本文从吸附-疏溶剂理论出发,根据热力学平衡观点,导出了一定固定相和流动相时,描述溶质保留行为与其分子结构关系的理论模型,并用之预测了饱和醇的保留值,获满意结果。从而表明本模型不但能用于同系物,而且亦可用于同分异构体及立体异构体保留行为的预测。     

Pr0.15TbxDy0.85-xFe2 内禀磁致伸缩的测量

对稀土金属间Laves相赝二元化合物进行X射线衍射分析。其(440)峰出现劈裂，由(440)峰劈裂的程度可以确定内禀磁致伸缩的大小。本文采用X射线衍射的方法对Pr0．15TbxDy0．85-xFe2系列粉末样品的(440)峰步进扫描，并对扫描结果进行拟合，对拟合得到的两组双线峰之间的间距计算得到内禀磁致伸缩λ111,拟合曲线与实验点符合很好，结果表明Pr0．15TbxDy0．85-xFe2的内禀磁致伸缩随Tb含量的增加而增加，并且用0．15的Pr替代Dy后，在x=0．3时，Pr0．15TbxDy0．85-xFe2的内禀磁致伸缩λ111比Tb0.27Dy0.73Fe2的内禀磁致伸缩λ1ll大。     

电动势法测定Cu(Ⅰ)与乙炔生成配合物的热力学函数

乙炔与Cu(I)生成配合物的热力学函数文献报道鲜见,且不同作者的测定结果差异较大。本文用改进的电动势法。对在氯丁橡胶、聚氯乙烯,乙醛等工业过程有重大意义的Cu(I)与乙炔配合物进行测定,得到更合理的结果。     

气液色谱法研究一些五员杂环和Ni[CF_3COCHC(C_4H_4S)=NCH_2]_2加合反应的热力学性质

用气液色谱法研究过一系列作为Lewis碱(B)的有机配体和作为Lewis酸(A)的配合物之间的加合作用.研究较多的碱已有脂肪醇、醚、酮、醛、脂及胶等.对生物体系中广为存在的杂环配体碱的工作还很少.本文着重研究噻吩,呋喃和吡咯这类小分子杂环配体和Ni[CF_3COCHC(C_4H_4S)=NCH_2]_2(以下简称A)配合物的加合反应. Ni[CF_3COCHC(C_4H_4S)=NCH_2]_2的合成参考文献.固定液角鲨烷系英国进口,     

Photovoltaic effect and carrier transport mechanisms in Hg1-Mnxtdiodes

Hg_1-xMn_xTe semiconducting semimagnetic alloy has been examined in the context of its possible applications in infrared detectors. For analysis of detector properties the intrinsic carrier concentration has been calculated as a function of temperature and crystal composition. The starting material was In-doped Hg_1-xMn_xTe grown by the modified Bridgman method. The as-grown crystals with manganese content of 12-19% were p-type with carrier concentration and mobility of 100 cm²/ Vs at 77 K. An-type layer was formed on the surface by the annealing process in saturated Hg-vapour at 270-320° for 2 hrs. Capacitance-voltage curves have C^-3 dependence on applied voltage indicating that the junction is linearly graded. From standard electrical measurements and spectral characteristics the main detector parameters were determined and compared to those of Hg_1-xCd_xTe devices. The influence of material properties on detector parameters was analyzed. In order to estimate the carrier transport mechanisms, differential resistivities and current-voltage curves were measured over a wide range of temperaturesi.e. 25 to 300 K. From the temperature dependence of the R₀A product, it was established that at high temperatures (150-300 K) the carrier transport is dominated by a recombination-generation mechanism. In low temperature region the excess current at forward bias is probably attributed to carrier tunneling via energy states distributed randomly within the forbidden gap. At reverse bias the leakage surface or volume currents dominate in the carrier transport.     

Alginate Properties and Heavy Metal Biosorption by Marine Algae

The physical properties of the alginate component in four different brown seaweeds (Sargassumfluitans, Ascophyllum nodosum, Fucus vesiculo-sus, andLaminaria japonica) were characterized using potentiometric titration,¹³C-nuclear magnetic resonance (NMR), chemical analysis, and viscosity measurements. The heavy metal binding capacities of the corresponding seaweeds were directly proportional to their respective total carboxyl group content, and related to the electronegativity of the elements investigated (Ca, Zn, Cd, Cu, and Pb). The uronic acid composition or sequence of the alginate component did not affect the metal uptake properties of the biosorbents studied here. However, the alginate leaching owing to its solubilization by Na ions was observed to decrease with increasing intrinsic viscosity of the extracted alginate, related to its molecular weight, and with increasing apparent acidic dissociation constant, related to the alginate density inside the biomass.     

Improvement of some pharmaceutical properties of nocloprost by β- and γ-Cyclodextrin Complexation

Inclusion complexation of nocloprost, a potent antiulcer prostaglandin derivative, with -, -, and -cyclodextrins (CyDs) in aqueous solutions has been studied by the solubility method and¹³C-NMR spectroscopy. The steric requirement of host-guest interaction was reflected in the magnitude of the stability constants and the thermodynamic parameters of the inclusion complexes. Solid complexes of nocloprost with - and -CyDs in a molar ratio of 1 : 2 were obtained on the basis of aBs-type phase solubility diagram. The X-ray diffraction data suggested that nocloprost is included in the cylindrical channel formed by coaxial alignment of -CyD molecules to give a channel type structure. Release and thermal behavior of the solid complexes was examined and compared with nocloprost itself. The results indicated that the -CyD complex may have great utility among the three CyDs, being a rapid dissolving form of nocloprost with improved thermal stability.     

XPS and XAES analysis of copper,arsenic and sulfur chemical state in enargites

Enargite, a copper arsenic sulfide with the formula Cu₃AsS₄ is of environmental concern due to its potential to release toxic arsenic species. The oxidation and dissolution of enargite are governed by the composition and chemical state of the outermost surface layer. Qualitative and quantitative analysis of the enargite surface can be initially obtained on the basis of X‐ray photoelectron spectroscopy (XPS) binding energy and intensity data. However, a more precise determination of the chemical state of the principal elements of enargite (copper, arsenic and sulfur) in the altered surface layer and in the bulk of the mineral requires a combined analysis based on XPS photoelectron lines and the corresponding X‐ray excited Auger lines. On the basis of results obtained on natural and synthetic enargite samples and on standards of sulfides and oxides, the Auger parameter α′ of different compounds was calculated and the Wagner chemical state plots were drawn for arsenic, copper and sulfur. Arsenic in enargite is found to be in a chemical environment similar to that of arsenides or elemental arsenic, whereas copper in enargite is in a chemical state that corresponds to copper sulfide, Cu₂S, for all samples irrespective of surface treatment (natural or freshly cleaved). Only sulfur changed from a chemical state similar to that of copper or iron sulfide in freshly cleaved samples to another state in natural enargite in the as‐received state. Thus, it is the sulfur atom at the surface of enargite that is most susceptible to changes in the enargite surface state and composition. A more detailed interpretation of this behavior, based on differences in the initial and final state effects, is proposed here. The concept of Auger parameter and chemical state plot, used here for the first time for investigating enargite, has proved to be a method to unambiguously assign the chemical state of the principal elements copper, arsenic and sulfur in these minerals. Copyright © 2006 John Wiley & Sons, Ltd.