高效毛细管电泳前沿分析法研究酸性药物那格列奈与人血浆白蛋白的结合

用高效毛细管电泳前沿分析法研究了酸性药物那格列奈与人血浆白蛋白的结合常数、结合位点和结合率。使用未涂层的毛细管柱 (4 0cm× 5 0 μmi.d .;有效柱长 32cm) ,磷酸盐缓冲溶液 (pH 7.4 ,离子强度0 .17)为背景溶液 ,在紫外检测波长 2 14nm、运行电压 18kV和重力进样 10 0s的条件下 ,利用那格列奈谱峰的平台高度和游离药物浓度的良好线性关系 (r>0 .999,n =6 ) ,测定了那格列奈的游离药物浓度。固定药物浓度 (2 0 0 μmol L ,2 5 0 μmol L) ,考察不同的蛋白质浓度对结合的影响 ;固定蛋白质浓度 (10 0 μmol L) ,考察不同的药物浓度对结合的影响。实验数据采用非线性拟和程序进行处理 ,得到了那格列奈的蛋白质结合参数。高效毛细管电泳前沿分析法测定的数据重现性良好 (RSD <2 .5 % ,n =3) ,在药代动力学和药效学研究方面具有简便、准确的优点。     

Diels-Alder reaction volumes in the solid state and solution

The densities of anthracene, tetracyanoethylene, maleic anhydride, N-phenylmaleineimide, trans, trans-1,4-diphenylbuta-1,3-diene, and their Diels-Alder adducts were measured in the solid state and in solution at 25 °C. The reaction volumes in the solid state were calculated from the difference in molar volumes. They turned out to be low, close to each other (–4 to –11 cm³ mol^–1), and slightly different from the reaction volumes (–8±1 cm³ mol^–1) calculated from the van der Waals radii. The reaction volumes in solutions (–15 to –32 cm³ mol^–1) were found from the difference in partial molar volumes of the reactants in dioxane, acetonitrile, and 1,2-dichloroethane, The experimental Diels-Alder reaction volumes in solution are determined not only by the formation of new bonds in an adduct: a considerably higher contribution (to 75%) is made by a change in the volume of intermolecular empty spaces in solution on going from reactants to adducts.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2386–2390, November, 2004.     

Optically clear simulataneous interpenetrating polymer networks based on poly(ethylene glycol) diacrylate and epoxy. II. Kinetic study

Simultaneous interpenetrating polymer networks (SINs) based on diglycidyl ether of bis-phenol A (DGEBA) and poly(ethylene glycol) diacrylate (PEGDA) in weight ratios of 100/0, 50/50, and 0/100 were blended and cured simultaneously by using benzoyl peroxide (BPO) and m-xylenediamine (MXDA) as curing agents. A kinetic study during SIN formation was carried out at 45, 55, 63, and 70°C. Concentration changes for both the epoxide and C?C bond were monitored with FTIR. A rate expression for DGEBA cure kinetics was established with a model reaction of phenyl glycidyl ether (PGE) and benzylamine. Experimental results revealed that lower rate constants and higher activation energy for the SIN were found, compared with those for the constituent DGEBA and PEGDA network formation. A model of network interlock was proposed to account for this phenomenon. During simultaneous cure of DGEBA and PEGDA, the interlock (mutual entanglement) between DGEBA and PEGDA networks provided a sterically hindered environment, which subsequently increased the activation energy and reduced cure rates for both DGEBA and PEGDA. © 1993 John Wiley & Sons, Inc.     

The determination of adsorbable organically bound halogens (AOX) in soil: interlaboratory comparisons and reference materials

The interlaboratory variability in the quantification of adsorbable organically bound halogens (AOX) in industrially contaminated soil is presented. Three consecutive rounds of a proficiency testing scheme, in which between 88 and 119 routine laboratories participated, yielded relative reproducibility standard deviations between 7 and 20% at AOX contents between 10.9 and 268 mg kg⁻¹. Nineteen laboratories with established proficiency were invited to participate in the certification of the AOX content in three soil reference materials meant for the internal quality control in analytical laboratories. The certified values are (1349 ± 59) mg kg⁻¹, (80 ± 7) mg kg⁻¹ and (102 ± 8) mg kg⁻¹, respectively.     

Insights into the Retention Mechanisms on Perfluorohexylpropylsiloxane-Bonded (Fluophase-RP) and Octadecylsiloxane-Bonded (Betasil C18) Stationary Phases Based on the Same Silica Substrate in RP-LC

The solvation parameter model is used to elucidate the retention mechanism on a perfluorohexylpropylsiloxane-bonded (Fluophase RP) and octadecylsiloxane-bonded (Betasil C18) stationary phases based on the same silica substrate with acetonitrile–water and methanol–water mobile phase compositions. Dewetting affects the retention properties of Fluophase RP at mobile phase compositions containing less than 20% (v/v) acetonitrile or 40% (v/v) methanol. It results in a loss of retention due to an unfavorable change in the phase ratio as well as changes in specific intermolecular interactions. Steric repulsion reduces retention of bulky solutes on fully solvated Betasil C18 with methanol–water (but not acetonitrile–water) mobile phase compositions but is not important for Fluophase RP. The retention of weak bases is affected by ion-exchange interactions on Fluophase RP with acetonitrile–water, and to a lesser extent, methanol-water mobile phases but these are weak at best for Betasil C18. The system constants of the solvation parameter model and retention factor scatter plots are used to compare selectivity differences for Fluophase RP, Betasil C18 and a perfluorophenylpropylsiloxane-bonded silica stationary phase Discovery HS F5 for conditions where incomplete solvation, steric repulsion and ion-exchange do not significantly contribute to the retention mechanism. Lower retention on Fluophase RP results from weaker dispersion and/or higher cohesion moderated to different extents by polar interactions since solvated Fluophase RP is a stronger hydrogen-bond acid and more dipolar/polarizable than Betasil C18. Retention factors for acetonitrile–water mobile phases are highly correlated for Fluophase RP and Betasil C18 except for compounds with a large excess molar refraction and weak hydrogen-bonding capability. Selectivity differences are more significant for methanol–water mobile phases. Retention factors on Fluophase RP are strongly correlated with those on Discovery HSF5 for acetonitrile–water mobile phases while methanol–water mobile phases retention on Fluophase RP is a poor predictor of the retention order on Discovery HS F5.     

CALCULATING THE MOLECULAR INTERNAL ROTATING STERIC FACTOR OF POLYMERS BY THE RADIATION CROSSLINKING METHOD

In this paper, calculating the molecular internal rotating steric factor of polymers by the radiation crosslinking method is studied and a relationship between the molecular internal rotating steric factor (σ) and crosslinking parameter βis established~([1]) by taking account of the effect of polymer chain flexibility on βvalue, σvalue of polymer obtained by this method is in agreement with that given with other method.     

Parameter identification of thermophilic anaerobic degradation of valerate

The considered mathematical model of the decomposition of valerate presents three unknown kinetic parameters, two unknown stoichiometric coefficients, and three unknown initial concentrations for biomass. Applying a structural identifiability study, we concluded that it is necessary to perform simultaneous batch experiments with differenitial conditions for estimating these parameters. Four simultaneous batch experiments were conducted at 55°C, characterized by four different initial acetate concentrations. Product inhibition of valerate degradation by acetate was considered. Practical identification was done optimizing the sum of the multiple determination coefficients for all measured state viariables and for all experiments simultaneously. The estimated values of kinetic parameters and stoichiometric coefficients were characterized by the parameter correlation matrix, the confidence interval, and the student's t-test at 9% significance level with positive results except for the saturation constant, for which more eperiments for improving its identifiability should be conducted. In this article, we discussekinetic parameter estimation methods.     

Precise bounds for the petersen time-varying real parameter uncertainty system stabilized via linear static controllers

Using a class of linear static controllers, we stabilize the Petersen open-loop two-dimensional linear system (Ref. 1), which consists of one time-varying uncertainty in the state matrixA and one timevarying uncertainty in the input matrixB. We show that the worst-case uncertainty strategy for the closed-loop system is a piecewise constant strategy of the angular state with three switches on the half-turn, –/2/2; it is unique with respect to a set of measure zero. Formulas are derived for the worst-case half-turn radius gainr _HT as a function of the parameters of the class of stabilizing linear static controllers. Using the class of scalar-quadratic Lyapunov functions, we show that a necessary and sufficient condition for the closed-loop system to be robustly stable against all time-varying admissible uncertainties is thatr _HT be less than unity. The bound on the time-varying real parameter uncertainties for the closed-loop system to be robustly stable is derived for the class of linear static feedback controllers. We obtain stabilizing linear static controllers such that the bound is as close to infinity as desired. The derived results are compared with numerical results obtained using commerical robust-control software.     

Parameter choice by discrepancy principles for ill-posed problems leading to optimal convergence rates

Schock (Ref. 1) considered a general a posteriori parameter choice strategy for the Tikhonov regularization of the ill-posed operator equationTx=y which provides nearly the optimal rate of convergence if the minimal-norm least-squares solution belongs to the range of the operator (T ^* T) ^v , o<v1. Recently, Nair (Ref. 2) improved the result of Schock and also provided the optimal rate ifv=1. In this note, we further improve the result and show in particular that the optimal rate can be achieved for 1/2v1.The final version of this work was written while M. T. Nair was a Visiting Fellow at the Centre for Mathematics and Its Applications, Australian National University, Canberra, Australia. The work of S. George was supported by a Senior Research Fellowship from CSIR, India.     

基于时域频域分析结合的调谐激光吸收光谱检测参数优化

随着调谐激光吸收光谱(tunable laser absorption spectroscopy, TLAS)技术在气体检测中的应用越来越广泛,二次谐波信号的质量与检测参数紧密相关,因而分析检测参数的优化方法很有意义。本文根据谱线预处理中的滤波参数、系统采样时间、锁相放大器的时间常数对信号的影响以及参数间的联系,总结检测参数的选取规律。根据滤波原理和不同浓度下信号的均方根误差(root mean squared error,RMSE)值选择合适的滤波阶数和窗宽。选择信噪比(signal-to-noise ratio,SNR)、RMSE、信号与噪声频域幅度之比(ratio of amplitude in frequency domain of signal to noise,f_SNR)3种评价指标的曲线变化趋势进行时频分析,得到最佳采样周期数为30,结合实验系统具体参数可计算最佳采样时间。通过信号主频带与截止频率的关系和滤波效果选择合适的时间常数。综合分析3个检测参数并总结选取方法,可提高二次谐波信号的质量。本文提出的参数选取方法对提高二次谐波在实际应用中的准确度有...