一种用于电子纸的电泳液的显示性能研究

用有机颜料汉沙黄(P.Y.3)、苏丹黑和合适的稳定剂为原料配制了一种性能稳定的电泳显示液.分析了此电泳显示液中颜料微粒的带电机理及其影响因素,研究了在改变电压方向时反射光谱与吸收光谱的变化及其原因,光谱分析结果表明体系中存在的各种吸附使显示效果受到局限,反射谱与吸收谱的变化在表征器件的显示特性时呈现出一致性,器件的反射光强和反射率在不同波长上有区域选择性,同时对比度也有区域选择性,这决定了在监测器件的响应时应选择的波长范围以及可利用的光源.兼顾灵敏性和测试信号强度的需求,选用峰值波长为470 nm的蓝光二极管为光源,电泳槽的厚度为0.2 mm,用荧光光谱仪监测相同周期不同幅值脉冲电压作用下颜料微粒在493 nm波长处的反射光强的变化,并由示波器记录并输出反射光强随驱动电压的变化,还结合相关理论讨论了驱动电压对器件的反射光强和对比度的影响.     

非傍轴矢量余弦-高斯光束两种光强表示的比较研究

从矢量瑞利-索末菲衍射积分公式出发,以非傍轴矢量余弦－高斯(CoG)光束为例,对非傍轴矢量光束的两种光强表示式,即传统光强公式和时间平均坡印廷矢量的z分量进行了比较研究.对非傍轴矢量CoG光束轴上和横向光强分布详细的数值计算和比较结果表明,两种光强表示式之间的相对误差η与w0/λ、z/λ和偏心参量b有关,其中w0,λ和z分别为束腰宽度,波长和传输距离.当偏心参量b较小,且束腰宽度与波长相比不很小时,例如,b≤0.8,w0/λ≥0.8,z/λ=10时,二者间的最大相对误差ηmax＜2%,传统光强公式可以使用.     

METHOD TO CALCULATE STRESS INTENSITY FACTOR OF V-NOTCH IN BI-MATERIALS

Based on Zak＇s stress function, the eigen-equation of stress singularity ofbi-materials with a V-notch was obtained. A new definition of stress intensity factor for a perpendicular interfacial V-notch of bi-material was put forward. The effects of shear modulus and Poisson＇s ratio of the matrix material and attaching material on eigen-values were analyzed. A generalized expression for calculating/（i of the perpendicular V-notch of bi-materials was obtained by means of stress extrapolation. Effects of notch depth, notch angle and Poisson＇s ratio of materials on the singular stress field near the tip of the V-notch were analyzed systematically with numerical simulations. As an example, a finite plate with double edge notches under uniaxial uniform tension was calculated by the method presented and the influence of the notch angle and Poisson＇s ratio on the stress singularity near the tip of notch was obtained.     

功能梯度双材料弱/微间断界面的冲击断裂分析

提出强间断、弱间断、微间断和全连续界面的概念与分类,建立功能梯度弹性双材料弱间断 界面冲击断裂问题的力学模型,采用积分变换法推导问题的Cauchy奇异积分方程,并用配 点法求得数值解. 分析表明,弱/微间断性对于FGMs界面裂纹应力强度因子有着重要影响, 而且微间断性是优于弱间断性的一种界面力学性能连接关系. 以FGMs界面某一侧 的力学性能函数在界面处的Taylor展开式的低阶项作为界面另一侧的力学性能函数,便可 以使FGMs界面成为``微间断'界面. 界面的一阶微间断对应力强度因子的减小作用较为明 显,而高阶(二阶及以上)微间断对应力强度因子的影响较小. 减小界面的弱间断程度或使 FGMs界面具备``微间断性',都将利于提高功能梯度双材料界面抗冲击断裂能力,在一定 程度上达到界面增韧的目的.     

半平面多边缘裂纹反平面问题的奇异积分方程

利用复变函数和奇异积分方程方法,求解弹性范围内半平面多边缘裂纹的反平面问题．提出了满足半平面边界自由的由分布位错密度表示的单边缘裂纹的基本解,此基本解由主要部分和辅助部分组成．将半平面多边缘裂纹问题看作是许多单边缘裂纹问题的叠加,建立了一组Cauchy型奇异积分方程．然后,利用半开型积分法则求解该奇异积分方程,得到了裂纹端处的应力强度因子．最后,给出了几个数值算例．     

Singular perturbation analysis of dynamic fields in a thermoelastic solid with a small surface-breaking crack

An asymptotic analysis is presented for a dynamic problem of a semi-infinite isotropic thermoelastic solid with a small surface breaking crack. The exterior surface of the solid is subjected to a series of short thermal pulses. The crack surface is traction free and an ideal thermal contact is assumed across the crack. The stress intensity factor is asymptotically evaluated as a function of the crack depth and time. The effect of a boundary layer associated with the diffusive term is identified. The theoretical model is supplied with numerical simulations.     

Application of scaled boundary finite element method in static and dynamic fracture problems

The scaled boundary finite element method (SBFEM) is a recently developed numerical method combining advantages of both finite element methods (FEM) and boundary element methods (BEM) and with its own special features as well. One of the most prominent advantages is its capability of calculating stress intensity factors (SIFs) directly from the stress solutions whose singularities at crack tips are analytically represented. This advantage is taken in this study to model static and dynamic fracture problems. For static problems, a remeshing algorithm as simple as used in the BEM is developed while retaining the generality and flexibility of the FEM. Fully-automatic modelling of the mixed-mode crack propagation is then realised by combining the remeshing algorithm with a propagation criterion. For dynamic fracture problems, a newly developed series-increasing solution to the SBFEM governing equations in the frequency domain is applied to calculate dynamic SIFs. Three plane problems are modelled. The numerical results show that the SBFEM can accurately predict static and dynamic SIFs, cracking paths and load-displacement curves, using only a fraction of degrees of freedom generally needed by the traditional finite element methods.The project supported by the National Natural Science Foundation of China (50579081) and the Australian Research Council (DP0452681)The English text was polished by Keren Wang.     

影响石英单模光纤数值孔径测量的因素及分析

本文采用远场光斑法和光强法测量了石英单模光纤的数值孔径.实验结果表明,由光纤耦合条件不同导致的光斑形状变化,对数值孔径的测量影响不大,单模光纤的纤芯直径小,导致出射光存在较强的衍射现象,对数值孔径的测量造成较大的影响,无论采用光斑法还是光强法,需以衍射第1次极大为计算标准,尽量选择光斑中心为亮斑时测量其数值孔径.此外,...     

考虑残值变化和消费者低碳偏好的生产定价与销售激励机制

在消费者低碳偏好和产品残值变化下,研究制造商的碳减排、生产及定价联合决策、以及对销售商的销售激励契约设计问题。不同于以往的研究假设残值不变,本文考虑残值依赖于清仓期库存以及碳减排问题。提出委托代理模型,求解模型并从理论上分析残值的变化和碳减排成本对双方决策和收益的影响。研究表明,残值变化率的增加只导致制造商的收益和生产量下降,不影响制造商的碳减排、定价、销售契约及零售商的决策和收益,但碳减排成本将导致制造商的收益和双方决策变量的下降。最后通过算例分析验证了结论,对供应链的运营实践有指导意义。     

考虑低碳偏好及碳减排的闭环供应链回收及专利授权策略

研究考虑消费者低碳偏好的闭环供应链回收、碳减排与专利授权决策问题。分别构建制造商回收再制造、零售商回收再制造支付固定专利费、零售商回收再制造支付单位专利费的闭环供应链模型,分析低碳消费者比例、普通消费者对再制品的接受程度及碳权交易价格,对企业回收、碳减排及定价决策的影响,并比较了三种模式下企业及供应链的利润。研究表明：随着市场中低碳消费者比例及普通消费者对再制品接受程度的提高,总会使得回收率及碳减排率增加;碳权交易价格的提高,也会促使制造商提高碳减排率;对制造商来说,其利润在零售商回收再制造且支付固定专利费用下实现最优。从自身利润最优的角度出发,作为领导者的制造商将总是选择零售商回收再制造且支付固定专利费用模式。