基于琼斯法的高亮度积分球定标光源

针对目前光学口径不断增大的空间光学遥感器实验室辐射定标的需求,基于琼斯法设计了一种在400~900 nm波段积分辐亮度为6 800 W/(m2·sr)的高亮度积分球定标光源。对该光源的热设计表明:采用水冷散热的方式能够满足高亮度积分球定标光源的散热需求。实验表明,该定标光源在400~900 nm波段范围内积分辐亮度达到6 714 W/(m2·sr),经过散热后积分球球体温度场分布满足定标要求,可应用于工程实践。     

抽运光与信号光的光强重叠因子和掺铒玻璃波导放大器的增益特性

在掺铒玻璃波导放大器（EDWA）的三能级速率-传输方程中,考虑两次离子交换工艺中波导掩模窗口宽度w不同所导致的抽运光、信号光模场与光强分布的不同,讨论不同w对EDWA增益特性的影响,得到光强分布的数值解.引入描述波导中抽运光和信号光的归一化光强重叠因子,对EDWA的传统近似解提出修正,得到了修正解,使其更加接近光强分布的数值解.模拟结果表明,在条波导长度为4 cm、抽运光波长为980 nm、功率为80 mW、信号光波长为1534 nm、功率为-10 dBm条件下,不同w所导致EDWA的增益差别可达297 dB.修正解的结果比传统近似解更加接近光强分布的数值解.修正解对于EDWA的理论研究、器件设计具有指导作用. 关键词： 集成光学 掺铒玻璃波导放大器 重叠积分因子 增益     

Dual-band frequency selective surface with quasi-elliptic bandpass response

Based on the substrate integrated waveguide technology,we present a dual-band frequency selective surface(FSS) with a quasi-elliptic bandpass response.The characteristics of the quasi-elliptic bandpass response are realized by shunting two substrate integrated waveguide cavities of different sizes,with the same slots on both sides of the metal surfaces.Four cavities of different sizes and two slots of different sizes are used to design the novel FSS.Every bandpass response with sharp sidebands is induced by two transmission nulls that are generated by the coupling between the slot aperture resonance and the cavity resonance.The simulation results show that such dual-band FSS has the advantages of high selectivity and stable performance at different oblique incident angles.Moreover,it is easy to fabricate.     

一种基于局部反馈校正的高精度联邦滤波器

提出了一种基于局部反馈校正的无重置联邦滤波器的设计方法,该联邦滤波器在保证组合导航系统的容错性能不变的同时可以提高系统的导航精度。该方法用于船用组合导航系统设计中,通过计算机仿真,并同Carlson提出的无重置联邦滤波器的仿真结果相比较,表明该方法精度高、容错性好,该方法现已成功应用于船用组合导航系统设计中。     

煤的清洁利用技术的现状与发展

文章针对中国一次能源以煤为主的特点,深入分析了几种主要的煤的洁净利用技术的现状及存在的主要问题和发展趋势,其中包括大容量、高参数的超(超)临界燃煤发电技术、燃煤烟气净化技术、循环流化床燃烧技术(CFBC)、整体煤气化联合循环技术(IGCC)和煤的洗选技术.在此基础上,给出了中国煤的清洁利用方式的建议:近期仍以超(超)临界燃煤发电机组+燃煤烟气净化技术和循环流化床燃烧技术为主;整体燃气化联合循环技术、富氧燃烧技术(特别是加压富氧燃烧技术)以及二氧化碳的捕集和封存技术(CCS),具有广阔应用前景,值得长期大力发展.     

Synthesis and Characterization of Pressure and Temperature Dual‐Responsive Polystyrene Microbeads

A facile approach to the synthesis of pressure and temperature dual‐responsive polystyrene (PS) microbeads with controlled sizes via dispersion polymerization is described. Three different luminophors are selected and directly introduced into the reaction system and thus incorporated into the resultant PS microbeads during polymerization. By manipulating the reaction conditions, including concentrations of the initiator and monomer, polarity of the reaction medium, and injection rate for the monomer, uniform PS microbeads with sizes ranging from 1 to 5 μm are obtained. When a light source centered at 365 nm is used to excite all the luminophors in the PS beads, three distinct and resolvable emission peaks corresponding well with the luminophors are observed. By taking advantage of their sensitive responses to both pressure and temperature, the PS beads can be utilized for quantitative measurements of these two stimulations simultaneously. The PS beads loaded with multiple luminophors have the ability to serve as building blocks for the fabrication of novel sensing and imaging devices and therefore provide a promising strategy for the study of aerodynamics.     

Fibre gratings and devices for sensors and lasers

Although mainstream grating writing, more often than not using single photon excitation of germanosilicate based defects with CW 244 nm light, remains the key technology for complex devices it is now being complemented by a whole host of processes which can enhance and tailor the properties of both conventional and not‐so‐conventional fibre Bragg gratings. Further, processes for writing of gratings in non‐germanosilicate fibres have also continued to develop and include multi‐photon excitation directly into the band edge of the glass. It is now possible to custom tailor a gratings property based on the application and the nature of production as well as custom tailor the grating writing process to suit the type of fibre and application. Examples and suggestions where these can benefit sensors and lasers are outlined.     

脊形波导中导模传输与损耗的分析与计算

本文运用有效折射率法把脊形波导化成等效二维平板波导后,再运用微分法求出弱吸收情况下波导模的吸收损耗,其方法简便,精确度高.     

III–V based-semiconductor photonic crystals

Three-dimensional (3D) and two-dimensional (2D) photonic crystals based on III–V semiconductors are described. On the 3D photonic crystals, the development of complete photonic crystals at optical wavelengths and their applications to ultrasmall optical integrated circuits including 3D sharp bend waveguide are described. On the 2D photonic crystals, two-unique device and/or phenomena are demonstrated.     

Simple Analog Complementary Metal Oxide Semiconductor Circuit for Generating Motion Signal

We proposed in this study a novel analog complementary metal oxide semiconductor (CMOS) circuit for generating a motion signal when an object moves, which is a simple structure. The proposed unit circuit was constructed using a previously proposed edge detection circuit and a novel proposed circuit for generating a motion signal which accepts an edge signal. The part for generating the motion signal was constructed using six metal oxide semiconductor (MOS) transistors and one capacitor. Results obtained by the simulation program with integrated circuit emphasis (SPICE) and the measured results of a test circuit constructed with discrete MOS transistors and the test circuit fabricated with a 1.2 μm CMOS process showed that the proposed unit circuit can output pulsed current (motion signal) when an object moves on the circuit. It was clarified from the SPICE results that the two-dimensional network constructed with proposed unit circuits can output motion signals. The size of the novel unit circuit is expected to be about 110 × 110μm² obtained by the 1.2 μm CMOS process. It is possible to arrange 90 × 90 unit circuits on a chip which has an area of 1 × 1cm². The aperture ratio is expected to be about 21%, which is twice as large as that of the previously proposed circuit. An integrated circuit for image processing in real time can thus be realized by applying the two-dimensional network constructed with the proposed circuits.