金属包覆平板波导模式特性的有限元法分析

采用有限元法（FEM）分析了具有复数折射率的金属包覆介质波导的模折射率与模场分布情况。计算了具有损耗层的6层介质平板波导模折射率，并与解析解比较，二者有较好的一致性；分析了金属包覆3层平板波导中TM模折射率与波导芯厚度的变化关系，计算了金属包覆5层平板波导中TM模折秧经与金属层厚度的变化关系，并结合对模场分布的分析对模式进行了定性判断，给出了其模式演变过程。     

传感器网络中基于二元簇的节能路由算法

传感器网络中的分簇算法已经被证明能够有效地节约能量。据此提出了一种基于二元簇的路由算法,其基本思想是网络中的每个节点同时属于2个不同簇,利用二元性来减少在路由发现中的资源浪费,并能够更加确定地发现路由以节约资源。理论分析和模拟实验都表明,该算法在能量消耗和网络生命周期延长方面较优。     

多模干涉型集成光学器件研究进展

基于自镜像效应(SIE)的多模干涉(MMI)型集成光学器件是集成光学中具有广泛用途的重要器件。本文详细而系统地综述了近几年来MMI器在国内外的研究进展，特别是其在集成光学中的应用。     

通信网络管理软件设计与开发

通信技术的发展，通信网络结构日益复杂，一个网络中会同时存在PDH、SDH、ATM、DWDM、无线业务和IP等多种技术。使用传统网管系统已无法胜任，只有应用针对多厂商、多技术网络的集中网管系统才能满足管理要求。现提出了一种新型的针对多厂商、多技术网络的集中网管软件的设计模型及实现方法，并详细讨论了各模块的数据结构、实现功能，以及用Java实现该软件的具体方法。特别根据网管任务的实际需要，提出了故障屏蔽的概念及实现方法。经仿真试验，证明该网管软件已达到设计要求。     

Characteristic of a broadband Ti:LiNbO3 optical modulator with buried electrodes and etched grooves in the buffer layer

Traveling wave Ti:LiNbO₃ Mach-Zehnder optical modulators with buried electrodes and etched grooves in the SiO₂ buffer layer are analyzed by the finite element method. The tradeoff between the bandwidth BW and the half-wave voltage Vπ is discussed. The value of BW/Vπ is used to weight the total performance of the modulator. Taking a thick buffer layer and etching deep grooves in the buffer layer are demonstrated as two effective methods to improve the performance of the modulator. A 3-dB optical bandwidth of 18 GHz with half-wave voltage 5V at a wavelength of 1.55 pm could be obtained even though the electrode is not very thick. When the requirement of half-wave voltage is not very critical, a bandwidth of more than 100 GHz can be obtained.     

混合集成电路激光功能调值技术

本文提出了激光功能微调技术在高精度混合集成电路上的应用，讨论了关键技术问题，并以实例具体说明。该技术的应用为研制高精度混合集成电路开辟了新途径。     

Low-Power Adaptive Biased Integrated Amplifiers

In this paper the author will present the working principle and the applications of a novel adaptive biasing topology, designed to decrease the stand-by power dissipation without affecting the transient performance of low-power amplifiers. The proposed circuit, whose principle and circuit topology can be implemented both in CMOS and in bipolar standard technologies, gives a biasing current whose value depends on the applied input differential voltage and can be set according to the requested transient performance constraints. The adaptive architecture can be utilized in the design of high-efficient low-power operational amplifiers, for the biasing of both the input stage (where the input source current is dynamically increased) and the output stage (where the output current can be controlled and limited). These amplifiers show a very good behaviour, evaluated in terms of two efficiency factors, if compared with those of other adaptive solutions and class-AB topologies, proposed in the literature. Simulation results and also measurements on a chip prototype, fabricated in a standard CMOS technology, are finally presented.     

Laser nanosources based on planar photonic crystals as new platforms for nanophotonic devices

Two-dimensional photonic crystal lasers have been fabricated on III–V semiconductor slabs. Tuning of the spontaneous emission in micro and nanocavities has been achieved by accurate control of the slab thickness. Different structures, some of them of new application to photonic crystal lasers, have been fabricated like the Suzuki-phase or the coupled-cavity ring-like resonators. Laser emission has been obtained by pulsed optical pumping. Optical characterization of the lasing modes have been performed showing one or more laser peaks centred around 1.55 μm. Far field characterization of the emission pattern has been realized showing different patterns depending on the geometrical shape of the structures. These kinds of devices may be used as efficient nanolaser sources for optical communications or optical sensors.     

综合网管中基于模型驱动的元数据管理

提出了一种基于模型驱动的元数据管理方案．方案采用了基于模型的形式化描述方法，统一了专业网管子系统间的元数据模式；通过引入模型驱动技术，从元模型的抽象层次消除了不同专业网管子系统之间存在的“信息孤岛”；方案还对综合网管环境下的元数据理论和交换机制进行了研究，并给出了元数据的管理框架以及元数据交换的Java接口映射．     

ATM网络中CBR业务连接允许控制机制

该文提出了一种基于有限容量缓冲区下CBR业务信元丢失率和最小速率替换的线性近似连接允许控制机制，与原有的CAC机制相比，该文的CAC机制存在两个方面的改进：一方面，使用更合理、精确的CLR表达式，从而能够作出更为准确的连接允许判断：另一方面，能够提供服务质量服务。