固体力学有限元体系的结构拓扑变化理论

本文是文[1]的继续.文[1]提出了杆件系统的结构拓扑变化理论和拓扑变化法本文将这一理论和方法推进到连续体有限元体系;且在此基础上揭示出有限元体系的一个新性质,称为基本位移之梯度的正交性定理,从而给出一套设计敏度的显式表达式,可直接用于计算.     

铁分子Fe2的自旋极化效应

采用密度泛函方法(B3P86)对 Fe_2分子结构进行了优化.计算结果中未观察到自旋污染,基态波函数与高态波函数并未混杂,结果表明,Fe_2中有8个未配对电子,这些电子空间分布不同和自旋平行产生的自旋极化效应,使 Fe_2能量最低.计算结果表明,Fe_2分子的基态是~9∑_g~ ,并非~7Δ_u,进而表明 Fe_2的自旋平行效应比电子自旋配对效应要强.计算得到该分子基态的二阶、三阶和四阶力常数分别为1.4115×10~(-2)aJ/nm~2、-37.1751×10~3aJ/nm~3和 98.7596×10~4aJ/nm~4；光谱数据ω_eχ_e、B_e、α_e分别为0.3522、0.0345、 0.4963×10~(-4)cm~(-1)；离解能为3.5522eV,平衡键长为0.2137nm,振动频率为292.914cm~(-1)；并得到了 Murrel-Sorbie 函数.     

人体中的伯努利方程

本文从设计实验入手,形象诠释伯努利原理,并从物理学角度出发,根据人体体液流动的实际情况,运用伯努利原理及经典的伯努利方程,从人体血液循环、房水循环的压力形成和改变方面,把物理学的基本理论运用于分析人体体液压力的变化。     

Preliminary Contribution to the Quantification of HMF in Honey by Electrochemical Biosensor Chips

Several hydroximethylfurfural (HMF) microbiosensors, based on a microelectrode configuration built by photolithographic techniques, have been developed. Two different biosensors based on the aldehyde dehydrogenase (ALDH) enzyme coupling with NADH oxidase (NOD) or diaphorase (Diaph) are described. Experimental variables were optimized using experimental design methodology, by central composite designs, taking the intensity registered for a given HMF solution as response. Given the reproducibility (residual standard deviation (RSD), 7.20%), repeatability (RSD=3%) and limit of detection (LOD)=1.68×10^?4 mol dm^?3 (α=β=0.05 and a replicate) reached by the ALDH‐Diaph microbiosensor under the optimum conditions, the analysis of HMF in honey was successfully accomplished.     

Generation of Technology-Independent Retargetable Analog Blocks

This paper introduces a complete methodology for retargeting of analog cells to different sets of specifications. This methodology is technology-independent, thus allowing the migration, from one technology to another, of the circuit under retargeting. Careful integration of the device sizing and layout generation tasks via the incorporation of layout constraints during the sizing process allows to generate fully functional designs in a few minutes. The methodology is illustrated via the retargeting of a fully-differential Miller-compensated two-stage operational amplifier for a new set of specifications and two different technological processes.An erratum to this article can be found at     

一种新型板件连接

TOX板件冲压连接工艺是一种新的板件连接技术。作者对TOX板件冲压连接技术进行了应用研究，并取得了一些经验。主要介绍一种板件连接技术－板件冲连接工艺，较详细地叙述了其原理、应用范围及工艺要点。     

模型论中的拓扑学方法

本文利用拓扑学方法研究了ω-范畴理论的性质,并对模型个数问题进行了讨论.     

电子产品可靠性设计与成本控制

介绍了可靠性设计过程涉及的质量控制成本的解决方法，通过对最有可能影响可靠性的电路设计、元器件选用等方面的分析，介绍了在降低可靠性设计成本的基础下更好地解决可靠性问题的一些方法。     

多进制数字调相系统分析与设计方法的探讨

对数字通信中MPSK系统的调制与解调问题进行了较为的分析，并以8PSK和循环码16PSK系统为例，阐述其调制器电路的逻辑设计方法。在此基础上给出了8PSK系统调制与解调的一种方案，讨论了循环码和自然二进制码16PSK系统的调制器的具体设计过程，该设计方法可应用于一般MPSK系统的逻辑设计。     

A Reliability Analysis of Calculated Results for Odd-Even and Odd-Odd Nuclei in Relativistic Mean-Field Theory

We calculate the binding energies of Ni, Cu, Xe, Cs, Pt, Au, Np, Pu isotope chains using two interaction parameter sets NL-3 and NL-Z, and compared the relative errors of the even-even nuclei with those of odd-even nuclei and odd-odd nuclei. We find that the errors of binding energy of odd-even and odd-odd nuclei are not bigger than the one of even-even nuclei. The result shows that comparing with even-even nuclei, there is no systematic error and approximation in the calculations of the binding energy of odd-even and odd-odd nuclei with relativistic mean-field theory. In addition, the result is explained theoretically.